--- sf_code/esrgpcpj/shared/tcl_base/tcl.h 2016/10/08 06:43:03 25 +++ projs/ets/trunk/src/c_tcl_base_7_5_w_mods/tcl.h 2018/07/22 15:58:07 220 @@ -1,1703 +1,1694 @@ -/* $Header: /cvsroot/esrg/sfesrg/esrgpcpj/shared/tcl_base/tcl.h,v 1.1.1.1 2001/06/13 04:32:55 dtashley Exp $ */ - -/* - * tcl.h -- - * - * This header file describes the externally-visible facilities - * of the Tcl interpreter. - * - * Copyright (c) 1987-1994 The Regents of the University of California. - * Copyright (c) 1993-1996 Lucent Technologies. - * Copyright (c) 1994-1998 Sun Microsystems, Inc. - * Copyright (c) 1998-2000 by Scriptics Corporation. - * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * RCS: @(#) $Id: tcl.h,v 1.1.1.1 2001/06/13 04:32:55 dtashley Exp $ - */ - -#ifndef _TCL -#define _TCL - -/* - * For C++ compilers, use extern "C" - */ - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * The following defines are used to indicate the various release levels. - */ - -#define TCL_ALPHA_RELEASE 0 -#define TCL_BETA_RELEASE 1 -#define TCL_FINAL_RELEASE 2 - -/* - * When version numbers change here, must also go into the following files - * and update the version numbers: - * - * library/init.tcl (only if Major.minor changes, not patchlevel) 1 LOC - * unix/configure.in (2 LOC Major, 2 LOC minor, 1 LOC patch) - * win/configure.in (as above) - * win/tcl.m4 (not patchlevel) - * win/makefile.vc (not patchlevel) 2 LOC - * win/pkgIndex.tcl (not patchlevel, for tclregNN.dll) - * README (sections 0 and 2) - * mac/README (2 LOC, not patchlevel) - * win/README.binary (sections 0-4) - * win/README (not patchlevel) (sections 0 and 2) - * unix/README (not patchlevel) (part (h)) - * unix/tcl.spec (2 LOC Major/Minor, 1 LOC patch) - * tests/basic.test (not patchlevel) (version checks) - * tools/tcl.hpj.in (not patchlevel, for windows installer) - * tools/tcl.wse.in (for windows installer) - * tools/tclSplash.bmp (not patchlevel) - */ - -#define TCL_MAJOR_VERSION 8 -#define TCL_MINOR_VERSION 3 -#define TCL_RELEASE_LEVEL TCL_FINAL_RELEASE -#define TCL_RELEASE_SERIAL 1 - -#define TCL_VERSION "8.3" -#define TCL_PATCH_LEVEL "8.3.1" - -/* - * The following definitions set up the proper options for Windows - * compilers. We use this method because there is no autoconf equivalent. - */ - -#ifndef __WIN32__ -# if defined(_WIN32) || defined(WIN32) -# define __WIN32__ -# endif -#endif - -#ifdef __WIN32__ -# ifndef STRICT -# define STRICT -# endif -# ifndef USE_PROTOTYPE -# define USE_PROTOTYPE 1 -# endif -# ifndef HAS_STDARG -# define HAS_STDARG 1 -# endif -# ifndef USE_PROTOTYPE -# define USE_PROTOTYPE 1 -# endif - -/* - * Under Windows we need to call Tcl_Alloc in all cases to avoid competing - * C run-time library issues. - */ - -# ifndef USE_TCLALLOC -# define USE_TCLALLOC 0 - /* Changed to 0 so could swap in new alloc module, DTA, - ** 07/06/00. - */ -# endif -#endif /* __WIN32__ */ - -/* - * The following definitions set up the proper options for Macintosh - * compilers. We use this method because there is no autoconf equivalent. - */ - -#ifdef MAC_TCL -# ifndef HAS_STDARG -# define HAS_STDARG 1 -# endif -# ifndef USE_TCLALLOC -# define USE_TCLALLOC 1 -# endif -# ifndef NO_STRERROR -# define NO_STRERROR 1 -# endif -# define INLINE -#endif - -/* - * Utility macros: STRINGIFY takes an argument and wraps it in "" (double - * quotation marks), JOIN joins two arguments. - */ - -#define VERBATIM(x) x -#ifdef _MSC_VER -# define STRINGIFY(x) STRINGIFY1(x) -# define STRINGIFY1(x) #x -# define JOIN(a,b) JOIN1(a,b) -# define JOIN1(a,b) a##b -#else -# ifdef RESOURCE_INCLUDED -# define STRINGIFY(x) STRINGIFY1(x) -# define STRINGIFY1(x) #x -# define JOIN(a,b) JOIN1(a,b) -# define JOIN1(a,b) a##b -# else -# ifdef __STDC__ -# define STRINGIFY(x) #x -# define JOIN(a,b) a##b -# else -# define STRINGIFY(x) "x" -# define JOIN(a,b) VERBATIM(a)VERBATIM(b) -# endif -# endif -#endif - -/* - * Special macro to define mutexes, that doesn't do anything - * if we are not using threads. - */ - -#ifdef TCL_THREADS -#define TCL_DECLARE_MUTEX(name) static Tcl_Mutex name; -#else -#define TCL_DECLARE_MUTEX(name) -#endif - -/* - * Macros that eliminate the overhead of the thread synchronization - * functions when compiling without thread support. - */ - -#ifndef TCL_THREADS -#define Tcl_MutexLock(mutexPtr) -#define Tcl_MutexUnlock(mutexPtr) -#define Tcl_MutexFinalize(mutexPtr) -#define Tcl_ConditionNotify(condPtr) -#define Tcl_ConditionWait(condPtr, mutexPtr, timePtr) -#define Tcl_ConditionFinalize(condPtr) -#endif /* TCL_THREADS */ - -/* - * A special definition used to allow this header file to be included - * in resource files so that they can get obtain version information from - * this file. Resource compilers don't like all the C stuff, like typedefs - * and procedure declarations, that occur below. - */ - -#ifndef RESOURCE_INCLUDED - -#ifndef BUFSIZ -#include -#endif - -/* - * Definitions that allow Tcl functions with variable numbers of - * arguments to be used with either varargs.h or stdarg.h. TCL_VARARGS - * is used in procedure prototypes. TCL_VARARGS_DEF is used to declare - * the arguments in a function definiton: it takes the type and name of - * the first argument and supplies the appropriate argument declaration - * string for use in the function definition. TCL_VARARGS_START - * initializes the va_list data structure and returns the first argument. - */ - -#if defined(__STDC__) || defined(HAS_STDARG) -# include - -# define TCL_VARARGS(type, name) (type name, ...) -# define TCL_VARARGS_DEF(type, name) (type name, ...) -# define TCL_VARARGS_START(type, name, list) (va_start(list, name), name) -#else -# include - -# ifdef __cplusplus -# define TCL_VARARGS(type, name) (type name, ...) -# define TCL_VARARGS_DEF(type, name) (type va_alist, ...) -# else -# define TCL_VARARGS(type, name) () -# define TCL_VARARGS_DEF(type, name) (va_alist) -# endif -# define TCL_VARARGS_START(type, name, list) \ - (va_start(list), va_arg(list, type)) -#endif - -/* - * Macros used to declare a function to be exported by a DLL. - * Used by Windows, maps to no-op declarations on non-Windows systems. - * The default build on windows is for a DLL, which causes the DLLIMPORT - * and DLLEXPORT macros to be nonempty. To build a static library, the - * macro STATIC_BUILD should be defined. - */ - -#ifdef STATIC_BUILD -# define DLLIMPORT -# define DLLEXPORT -#else -# if defined(__WIN32__) && (defined(_MSC_VER) || (defined(__GNUC__) && defined(__declspec))) -# define DLLIMPORT __declspec(dllimport) -# define DLLEXPORT __declspec(dllexport) -# else -# define DLLIMPORT -# define DLLEXPORT -# endif -#endif - -/* - * These macros are used to control whether functions are being declared for - * import or export. If a function is being declared while it is being built - * to be included in a shared library, then it should have the DLLEXPORT - * storage class. If is being declared for use by a module that is going to - * link against the shared library, then it should have the DLLIMPORT storage - * class. If the symbol is beind declared for a static build or for use from a - * stub library, then the storage class should be empty. - * - * The convention is that a macro called BUILD_xxxx, where xxxx is the - * name of a library we are building, is set on the compile line for sources - * that are to be placed in the library. When this macro is set, the - * storage class will be set to DLLEXPORT. At the end of the header file, the - * storage class will be reset to DLLIMPORt. - */ - -#undef TCL_STORAGE_CLASS -#ifdef BUILD_tcl -# define TCL_STORAGE_CLASS DLLEXPORT -#else -# ifdef USE_TCL_STUBS -# define TCL_STORAGE_CLASS -# else -# define TCL_STORAGE_CLASS DLLIMPORT -# endif -#endif - -/* - * Definitions that allow this header file to be used either with or - * without ANSI C features like function prototypes. - */ - -#undef _ANSI_ARGS_ -#undef CONST -#ifndef INLINE -# define INLINE -#endif - -#if ((defined(__STDC__) || defined(SABER)) && !defined(NO_PROTOTYPE)) || defined(__cplusplus) || defined(USE_PROTOTYPE) -# define _USING_PROTOTYPES_ 1 -# define _ANSI_ARGS_(x) x -# define CONST const -#else -# define _ANSI_ARGS_(x) () -# define CONST -#endif - -/* - * Make sure EXTERN isn't defined elsewhere - */ -#ifdef EXTERN -#undef EXTERN -#endif /* EXTERN */ - -#ifdef __cplusplus -# define EXTERN extern "C" TCL_STORAGE_CLASS -#else -# define EXTERN extern TCL_STORAGE_CLASS -#endif - -/* - * Macro to use instead of "void" for arguments that must have - * type "void *" in ANSI C; maps them to type "char *" in - * non-ANSI systems. - */ -#ifndef __WIN32__ -#ifndef VOID -# ifdef __STDC__ -# define VOID void -# else -# define VOID char -# endif -#endif -#else /* __WIN32__ */ -/* - * The following code is copied from winnt.h - */ -#ifndef VOID -#define VOID void -typedef char CHAR; -typedef short SHORT; -typedef long LONG; -#endif -#endif /* __WIN32__ */ - -/* - * Miscellaneous declarations. - */ - -#ifndef NULL -#define NULL 0 -#endif - -#ifndef _CLIENTDATA -# if defined(__STDC__) || defined(__cplusplus) - typedef void *ClientData; -# else - typedef int *ClientData; -# endif /* __STDC__ */ -#define _CLIENTDATA -#endif - -/* - * Data structures defined opaquely in this module. The definitions below - * just provide dummy types. A few fields are made visible in Tcl_Interp - * structures, namely those used for returning a string result from - * commands. Direct access to the result field is discouraged in Tcl 8.0. - * The interpreter result is either an object or a string, and the two - * values are kept consistent unless some C code sets interp->result - * directly. Programmers should use either the procedure Tcl_GetObjResult() - * or Tcl_GetStringResult() to read the interpreter's result. See the - * SetResult man page for details. - * - * Note: any change to the Tcl_Interp definition below must be mirrored - * in the "real" definition in tclInt.h. - * - * Note: Tcl_ObjCmdProc procedures do not directly set result and freeProc. - * Instead, they set a Tcl_Obj member in the "real" structure that can be - * accessed with Tcl_GetObjResult() and Tcl_SetObjResult(). - */ - -typedef struct Tcl_Interp { - char *result; /* If the last command returned a string - * result, this points to it. */ - void (*freeProc) _ANSI_ARGS_((char *blockPtr)); - /* Zero means the string result is - * statically allocated. TCL_DYNAMIC means - * it was allocated with ckalloc and should - * be freed with ckfree. Other values give - * the address of procedure to invoke to - * free the result. Tcl_Eval must free it - * before executing next command. */ - int errorLine; /* When TCL_ERROR is returned, this gives - * the line number within the command where - * the error occurred (1 if first line). */ -} Tcl_Interp; - -typedef struct Tcl_AsyncHandler_ *Tcl_AsyncHandler; -typedef struct Tcl_Channel_ *Tcl_Channel; -typedef struct Tcl_Command_ *Tcl_Command; -typedef struct Tcl_Condition_ *Tcl_Condition; -typedef struct Tcl_EncodingState_ *Tcl_EncodingState; -typedef struct Tcl_Encoding_ *Tcl_Encoding; -typedef struct Tcl_Event Tcl_Event; -typedef struct Tcl_Mutex_ *Tcl_Mutex; -typedef struct Tcl_Pid_ *Tcl_Pid; -typedef struct Tcl_RegExp_ *Tcl_RegExp; -typedef struct Tcl_ThreadDataKey_ *Tcl_ThreadDataKey; -typedef struct Tcl_ThreadId_ *Tcl_ThreadId; -typedef struct Tcl_TimerToken_ *Tcl_TimerToken; -typedef struct Tcl_Trace_ *Tcl_Trace; -typedef struct Tcl_Var_ *Tcl_Var; - -/* - * Definition of the interface to procedures implementing threads. - * A procedure following this definition is given to each call of - * 'Tcl_CreateThread' and will be called as the main fuction of - * the new thread created by that call. - */ - -#ifdef MAC_TCL -typedef pascal void *(Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); -#elif defined __WIN32__ -typedef unsigned (__stdcall Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); -#else -typedef void (Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); -#endif - - -/* - * Threading function return types used for abstracting away platform - * differences when writing a Tcl_ThreadCreateProc. See the NewThread - * function in generic/tclThreadTest.c for it's usage. - */ -#ifdef MAC_TCL -# define Tcl_ThreadCreateType pascal void * -# define TCL_THREAD_CREATE_RETURN return NULL -#elif defined __WIN32__ -# define Tcl_ThreadCreateType unsigned __stdcall -# define TCL_THREAD_CREATE_RETURN return 0 -#else -# define Tcl_ThreadCreateType void -# define TCL_THREAD_CREATE_RETURN -#endif - - - -/* - * Definition of values for default stacksize and the possible flags to be - * given to Tcl_CreateThread. - */ - -#define TCL_THREAD_STACK_DEFAULT (0) /* Use default size for stack */ -#define TCL_THREAD_NOFLAGS (0000) /* Standard flags, default behaviour */ -#define TCL_THREAD_JOINABLE (0001) /* Mark the thread as joinable */ - -/* - * Flag values passed to Tcl_GetRegExpFromObj. - */ - -#define TCL_REG_BASIC 000000 /* BREs (convenience) */ -#define TCL_REG_EXTENDED 000001 /* EREs */ -#define TCL_REG_ADVF 000002 /* advanced features in EREs */ -#define TCL_REG_ADVANCED 000003 /* AREs (which are also EREs) */ -#define TCL_REG_QUOTE 000004 /* no special characters, none */ -#define TCL_REG_NOCASE 000010 /* ignore case */ -#define TCL_REG_NOSUB 000020 /* don't care about subexpressions */ -#define TCL_REG_EXPANDED 000040 /* expanded format, white space & - * comments */ -#define TCL_REG_NLSTOP 000100 /* \n doesn't match . or [^ ] */ -#define TCL_REG_NLANCH 000200 /* ^ matches after \n, $ before */ -#define TCL_REG_NEWLINE 000300 /* newlines are line terminators */ -#define TCL_REG_CANMATCH 001000 /* report details on partial/limited - * matches */ - -/* - * The following flag is experimental and only intended for use by Expect. It - * will probably go away in a later release. - */ - -#define TCL_REG_BOSONLY 002000 /* prepend \A to pattern so it only - * matches at the beginning of the - * string. */ - -/* - * Flags values passed to Tcl_RegExpExecObj. - */ - -#define TCL_REG_NOTBOL 0001 /* Beginning of string does not match ^. */ -#define TCL_REG_NOTEOL 0002 /* End of string does not match $. */ - -/* - * Structures filled in by Tcl_RegExpInfo. Note that all offset values are - * relative to the start of the match string, not the beginning of the - * entire string. - */ - -typedef struct Tcl_RegExpIndices { - long start; /* character offset of first character in match */ - long end; /* character offset of first character after the - * match. */ -} Tcl_RegExpIndices; - -typedef struct Tcl_RegExpInfo { - int nsubs; /* number of subexpressions in the - * compiled expression */ - Tcl_RegExpIndices *matches; /* array of nsubs match offset - * pairs */ - long extendStart; /* The offset at which a subsequent - * match might begin. */ - long reserved; /* Reserved for later use. */ -} Tcl_RegExpInfo; - -/* - * Picky compilers complain if this typdef doesn't appear before the - * struct's reference in tclDecls.h. - */ - -typedef struct stat *Tcl_Stat_; - -/* - * When a TCL command returns, the interpreter contains a result from the - * command. Programmers are strongly encouraged to use one of the - * procedures Tcl_GetObjResult() or Tcl_GetStringResult() to read the - * interpreter's result. See the SetResult man page for details. Besides - * this result, the command procedure returns an integer code, which is - * one of the following: - * - * TCL_OK Command completed normally; the interpreter's - * result contains the command's result. - * TCL_ERROR The command couldn't be completed successfully; - * the interpreter's result describes what went wrong. - * TCL_RETURN The command requests that the current procedure - * return; the interpreter's result contains the - * procedure's return value. - * TCL_BREAK The command requests that the innermost loop - * be exited; the interpreter's result is meaningless. - * TCL_CONTINUE Go on to the next iteration of the current loop; - * the interpreter's result is meaningless. - */ - -#define TCL_OK 0 -#define TCL_ERROR 1 -#define TCL_RETURN 2 -#define TCL_BREAK 3 -#define TCL_CONTINUE 4 - -#define TCL_RESULT_SIZE 200 - -/* - * Argument descriptors for math function callbacks in expressions: - */ - -typedef enum {TCL_INT, TCL_DOUBLE, TCL_EITHER} Tcl_ValueType; -typedef struct Tcl_Value { - Tcl_ValueType type; /* Indicates intValue or doubleValue is - * valid, or both. */ - long intValue; /* Integer value. */ - double doubleValue; /* Double-precision floating value. */ -} Tcl_Value; - -/* - * Forward declaration of Tcl_Obj to prevent an error when the forward - * reference to Tcl_Obj is encountered in the procedure types declared - * below. - */ - -struct Tcl_Obj; - -/* - * Procedure types defined by Tcl: - */ - -typedef int (Tcl_AppInitProc) _ANSI_ARGS_((Tcl_Interp *interp)); -typedef int (Tcl_AsyncProc) _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int code)); -typedef void (Tcl_ChannelProc) _ANSI_ARGS_((ClientData clientData, int mask)); -typedef void (Tcl_CloseProc) _ANSI_ARGS_((ClientData data)); -typedef void (Tcl_CmdDeleteProc) _ANSI_ARGS_((ClientData clientData)); -typedef int (Tcl_CmdProc) _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int argc, char *argv[])); -typedef void (Tcl_CmdTraceProc) _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int level, char *command, Tcl_CmdProc *proc, - ClientData cmdClientData, int argc, char *argv[])); -typedef void (Tcl_DupInternalRepProc) _ANSI_ARGS_((struct Tcl_Obj *srcPtr, - struct Tcl_Obj *dupPtr)); -typedef int (Tcl_EncodingConvertProc)_ANSI_ARGS_((ClientData clientData, - CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, - char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, - int *dstCharsPtr)); -typedef void (Tcl_EncodingFreeProc)_ANSI_ARGS_((ClientData clientData)); -typedef int (Tcl_EventProc) _ANSI_ARGS_((Tcl_Event *evPtr, int flags)); -typedef void (Tcl_EventCheckProc) _ANSI_ARGS_((ClientData clientData, - int flags)); -typedef int (Tcl_EventDeleteProc) _ANSI_ARGS_((Tcl_Event *evPtr, - ClientData clientData)); -typedef void (Tcl_EventSetupProc) _ANSI_ARGS_((ClientData clientData, - int flags)); -typedef void (Tcl_ExitProc) _ANSI_ARGS_((ClientData clientData)); -typedef void (Tcl_FileProc) _ANSI_ARGS_((ClientData clientData, int mask)); -typedef void (Tcl_FileFreeProc) _ANSI_ARGS_((ClientData clientData)); -typedef void (Tcl_FreeInternalRepProc) _ANSI_ARGS_((struct Tcl_Obj *objPtr)); -typedef void (Tcl_FreeProc) _ANSI_ARGS_((char *blockPtr)); -typedef void (Tcl_IdleProc) _ANSI_ARGS_((ClientData clientData)); -typedef void (Tcl_InterpDeleteProc) _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp)); -typedef int (Tcl_MathProc) _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, Tcl_Value *args, Tcl_Value *resultPtr)); -typedef void (Tcl_NamespaceDeleteProc) _ANSI_ARGS_((ClientData clientData)); -typedef int (Tcl_ObjCmdProc) _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, int objc, struct Tcl_Obj *CONST objv[])); -typedef int (Tcl_PackageInitProc) _ANSI_ARGS_((Tcl_Interp *interp)); -typedef void (Tcl_PanicProc) _ANSI_ARGS_(TCL_VARARGS(char *, format)); -typedef void (Tcl_TcpAcceptProc) _ANSI_ARGS_((ClientData callbackData, - Tcl_Channel chan, char *address, int port)); -typedef void (Tcl_TimerProc) _ANSI_ARGS_((ClientData clientData)); -typedef int (Tcl_SetFromAnyProc) _ANSI_ARGS_((Tcl_Interp *interp, - struct Tcl_Obj *objPtr)); -typedef void (Tcl_UpdateStringProc) _ANSI_ARGS_((struct Tcl_Obj *objPtr)); -typedef char *(Tcl_VarTraceProc) _ANSI_ARGS_((ClientData clientData, - Tcl_Interp *interp, char *part1, char *part2, int flags)); -typedef void (Tcl_CreateFileHandlerProc) _ANSI_ARGS_((int fd, int mask, - Tcl_FileProc *proc, ClientData clientData)); -typedef void (Tcl_DeleteFileHandlerProc) _ANSI_ARGS_((int fd)); - -/* - * The following structure represents a type of object, which is a - * particular internal representation for an object plus a set of - * procedures that provide standard operations on objects of that type. - */ - -typedef struct Tcl_ObjType { - char *name; /* Name of the type, e.g. "int". */ - Tcl_FreeInternalRepProc *freeIntRepProc; - /* Called to free any storage for the type's - * internal rep. NULL if the internal rep - * does not need freeing. */ - Tcl_DupInternalRepProc *dupIntRepProc; - /* Called to create a new object as a copy - * of an existing object. */ - Tcl_UpdateStringProc *updateStringProc; - /* Called to update the string rep from the - * type's internal representation. */ - Tcl_SetFromAnyProc *setFromAnyProc; - /* Called to convert the object's internal - * rep to this type. Frees the internal rep - * of the old type. Returns TCL_ERROR on - * failure. */ -} Tcl_ObjType; - -/* - * One of the following structures exists for each object in the Tcl - * system. An object stores a value as either a string, some internal - * representation, or both. - */ - -typedef struct Tcl_Obj { - int refCount; /* When 0 the object will be freed. */ - char *bytes; /* This points to the first byte of the - * object's string representation. The array - * must be followed by a null byte (i.e., at - * offset length) but may also contain - * embedded null characters. The array's - * storage is allocated by ckalloc. NULL - * means the string rep is invalid and must - * be regenerated from the internal rep. - * Clients should use Tcl_GetStringFromObj - * or Tcl_GetString to get a pointer to the - * byte array as a readonly value. */ - int length; /* The number of bytes at *bytes, not - * including the terminating null. */ - Tcl_ObjType *typePtr; /* Denotes the object's type. Always - * corresponds to the type of the object's - * internal rep. NULL indicates the object - * has no internal rep (has no type). */ - union { /* The internal representation: */ - long longValue; /* - an long integer value */ - double doubleValue; /* - a double-precision floating value */ - VOID *otherValuePtr; /* - another, type-specific value */ - struct { /* - internal rep as two pointers */ - VOID *ptr1; - VOID *ptr2; - } twoPtrValue; - } internalRep; -} Tcl_Obj; - -/* - * Macros to increment and decrement a Tcl_Obj's reference count, and to - * test whether an object is shared (i.e. has reference count > 1). - * Note: clients should use Tcl_DecrRefCount() when they are finished using - * an object, and should never call TclFreeObj() directly. TclFreeObj() is - * only defined and made public in tcl.h to support Tcl_DecrRefCount's macro - * definition. Note also that Tcl_DecrRefCount() refers to the parameter - * "obj" twice. This means that you should avoid calling it with an - * expression that is expensive to compute or has side effects. - */ - -void Tcl_IncrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr)); -void Tcl_DecrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr)); -int Tcl_IsShared _ANSI_ARGS_((Tcl_Obj *objPtr)); - -#ifdef TCL_MEM_DEBUG -# define Tcl_IncrRefCount(objPtr) \ - Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__) -# define Tcl_DecrRefCount(objPtr) \ - Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__) -# define Tcl_IsShared(objPtr) \ - Tcl_DbIsShared(objPtr, __FILE__, __LINE__) -#else -# define Tcl_IncrRefCount(objPtr) \ - ++(objPtr)->refCount -# define Tcl_DecrRefCount(objPtr) \ - if (--(objPtr)->refCount <= 0) TclFreeObj(objPtr) -# define Tcl_IsShared(objPtr) \ - ((objPtr)->refCount > 1) -#endif - -/* - * Macros and definitions that help to debug the use of Tcl objects. - * When TCL_MEM_DEBUG is defined, the Tcl_New declarations are - * overridden to call debugging versions of the object creation procedures. - */ - -#ifdef TCL_MEM_DEBUG -# define Tcl_NewBooleanObj(val) \ - Tcl_DbNewBooleanObj(val, __FILE__, __LINE__) -# define Tcl_NewByteArrayObj(bytes, len) \ - Tcl_DbNewByteArrayObj(bytes, len, __FILE__, __LINE__) -# define Tcl_NewDoubleObj(val) \ - Tcl_DbNewDoubleObj(val, __FILE__, __LINE__) -# define Tcl_NewIntObj(val) \ - Tcl_DbNewLongObj(val, __FILE__, __LINE__) -# define Tcl_NewListObj(objc, objv) \ - Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__) -# define Tcl_NewLongObj(val) \ - Tcl_DbNewLongObj(val, __FILE__, __LINE__) -# define Tcl_NewObj() \ - Tcl_DbNewObj(__FILE__, __LINE__) -# define Tcl_NewStringObj(bytes, len) \ - Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__) -#endif /* TCL_MEM_DEBUG */ - -/* - * The following structure contains the state needed by - * Tcl_SaveResult. No-one outside of Tcl should access any of these - * fields. This structure is typically allocated on the stack. - */ - -typedef struct Tcl_SavedResult { - char *result; - Tcl_FreeProc *freeProc; - Tcl_Obj *objResultPtr; - char *appendResult; - int appendAvl; - int appendUsed; - char resultSpace[TCL_RESULT_SIZE+1]; -} Tcl_SavedResult; - - -/* - * The following definitions support Tcl's namespace facility. - * Note: the first five fields must match exactly the fields in a - * Namespace structure (see tclInt.h). - */ - -typedef struct Tcl_Namespace { - char *name; /* The namespace's name within its parent - * namespace. This contains no ::'s. The - * name of the global namespace is "" - * although "::" is an synonym. */ - char *fullName; /* The namespace's fully qualified name. - * This starts with ::. */ - ClientData clientData; /* Arbitrary value associated with this - * namespace. */ - Tcl_NamespaceDeleteProc* deleteProc; - /* Procedure invoked when deleting the - * namespace to, e.g., free clientData. */ - struct Tcl_Namespace* parentPtr; - /* Points to the namespace that contains - * this one. NULL if this is the global - * namespace. */ -} Tcl_Namespace; - -/* - * The following structure represents a call frame, or activation record. - * A call frame defines a naming context for a procedure call: its local - * scope (for local variables) and its namespace scope (used for non-local - * variables; often the global :: namespace). A call frame can also define - * the naming context for a namespace eval or namespace inscope command: - * the namespace in which the command's code should execute. The - * Tcl_CallFrame structures exist only while procedures or namespace - * eval/inscope's are being executed, and provide a Tcl call stack. - * - * A call frame is initialized and pushed using Tcl_PushCallFrame and - * popped using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be - * provided by the Tcl_PushCallFrame caller, and callers typically allocate - * them on the C call stack for efficiency. For this reason, Tcl_CallFrame - * is defined as a structure and not as an opaque token. However, most - * Tcl_CallFrame fields are hidden since applications should not access - * them directly; others are declared as "dummyX". - * - * WARNING!! The structure definition must be kept consistent with the - * CallFrame structure in tclInt.h. If you change one, change the other. - */ - -typedef struct Tcl_CallFrame { - Tcl_Namespace *nsPtr; - int dummy1; - int dummy2; - char *dummy3; - char *dummy4; - char *dummy5; - int dummy6; - char *dummy7; - char *dummy8; - int dummy9; - char* dummy10; -} Tcl_CallFrame; - -/* - * Information about commands that is returned by Tcl_GetCommandInfo and - * passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based - * command procedure while proc is a traditional Tcl argc/argv - * string-based procedure. Tcl_CreateObjCommand and Tcl_CreateCommand - * ensure that both objProc and proc are non-NULL and can be called to - * execute the command. However, it may be faster to call one instead of - * the other. The member isNativeObjectProc is set to 1 if an - * object-based procedure was registered by Tcl_CreateObjCommand, and to - * 0 if a string-based procedure was registered by Tcl_CreateCommand. - * The other procedure is typically set to a compatibility wrapper that - * does string-to-object or object-to-string argument conversions then - * calls the other procedure. - */ - -typedef struct Tcl_CmdInfo { - int isNativeObjectProc; /* 1 if objProc was registered by a call to - * Tcl_CreateObjCommand; 0 otherwise. - * Tcl_SetCmdInfo does not modify this - * field. */ - Tcl_ObjCmdProc *objProc; /* Command's object-based procedure. */ - ClientData objClientData; /* ClientData for object proc. */ - Tcl_CmdProc *proc; /* Command's string-based procedure. */ - ClientData clientData; /* ClientData for string proc. */ - Tcl_CmdDeleteProc *deleteProc; - /* Procedure to call when command is - * deleted. */ - ClientData deleteData; /* Value to pass to deleteProc (usually - * the same as clientData). */ - Tcl_Namespace *namespacePtr; /* Points to the namespace that contains - * this command. Note that Tcl_SetCmdInfo - * will not change a command's namespace; - * use Tcl_RenameCommand to do that. */ - -} Tcl_CmdInfo; - -/* - * The structure defined below is used to hold dynamic strings. The only - * field that clients should use is the string field, and they should - * never modify it. - */ - -#define TCL_DSTRING_STATIC_SIZE 200 -typedef struct Tcl_DString { - char *string; /* Points to beginning of string: either - * staticSpace below or a malloced array. */ - int length; /* Number of non-NULL characters in the - * string. */ - int spaceAvl; /* Total number of bytes available for the - * string and its terminating NULL char. */ - char staticSpace[TCL_DSTRING_STATIC_SIZE]; - /* Space to use in common case where string - * is small. */ -} Tcl_DString; - -#define Tcl_DStringLength(dsPtr) ((dsPtr)->length) -#define Tcl_DStringValue(dsPtr) ((dsPtr)->string) -#define Tcl_DStringTrunc Tcl_DStringSetLength - -/* - * Definitions for the maximum number of digits of precision that may - * be specified in the "tcl_precision" variable, and the number of - * bytes of buffer space required by Tcl_PrintDouble. - */ - -#define TCL_MAX_PREC 17 -#define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10) - -/* - * Definition for a number of bytes of buffer space sufficient to hold the - * string representation of an integer in base 10 (assuming the existence - * of 64-bit integers). - */ - -#define TCL_INTEGER_SPACE 24 - -/* - * Flag that may be passed to Tcl_ConvertElement to force it not to - * output braces (careful! if you change this flag be sure to change - * the definitions at the front of tclUtil.c). - */ - -#define TCL_DONT_USE_BRACES 1 - -/* - * Flag that may be passed to Tcl_GetIndexFromObj to force it to disallow - * abbreviated strings. - */ - -#define TCL_EXACT 1 - -/* - * Flag values passed to Tcl_RecordAndEval and/or Tcl_EvalObj. - * WARNING: these bit choices must not conflict with the bit choices - * for evalFlag bits in tclInt.h!! - */ - -#define TCL_NO_EVAL 0x10000 -#define TCL_EVAL_GLOBAL 0x20000 -#define TCL_EVAL_DIRECT 0x40000 - -/* - * Special freeProc values that may be passed to Tcl_SetResult (see - * the man page for details): - */ - -#define TCL_VOLATILE ((Tcl_FreeProc *) 1) -#define TCL_STATIC ((Tcl_FreeProc *) 0) -#define TCL_DYNAMIC ((Tcl_FreeProc *) 3) - -/* - * Flag values passed to variable-related procedures. - */ - -#define TCL_GLOBAL_ONLY 1 -#define TCL_NAMESPACE_ONLY 2 -#define TCL_APPEND_VALUE 4 -#define TCL_LIST_ELEMENT 8 -#define TCL_TRACE_READS 0x10 -#define TCL_TRACE_WRITES 0x20 -#define TCL_TRACE_UNSETS 0x40 -#define TCL_TRACE_DESTROYED 0x80 -#define TCL_INTERP_DESTROYED 0x100 -#define TCL_LEAVE_ERR_MSG 0x200 -#define TCL_TRACE_ARRAY 0x800 - -/* - * The TCL_PARSE_PART1 flag is deprecated and has no effect. - * The part1 is now always parsed whenever the part2 is NULL. - * (This is to avoid a common error when converting code to - * use the new object based APIs and forgetting to give the - * flag) - */ -#ifndef TCL_NO_DEPRECATED -#define TCL_PARSE_PART1 0x400 -#endif - - -/* - * Types for linked variables: - */ - -#define TCL_LINK_INT 1 -#define TCL_LINK_DOUBLE 2 -#define TCL_LINK_BOOLEAN 3 -#define TCL_LINK_STRING 4 -#define TCL_LINK_READ_ONLY 0x80 - -/* - * Forward declaration of Tcl_HashTable. Needed by some C++ compilers - * to prevent errors when the forward reference to Tcl_HashTable is - * encountered in the Tcl_HashEntry structure. - */ - -#ifdef __cplusplus -struct Tcl_HashTable; -#endif - -/* - * Structure definition for an entry in a hash table. No-one outside - * Tcl should access any of these fields directly; use the macros - * defined below. - */ - -typedef struct Tcl_HashEntry { - struct Tcl_HashEntry *nextPtr; /* Pointer to next entry in this - * hash bucket, or NULL for end of - * chain. */ - struct Tcl_HashTable *tablePtr; /* Pointer to table containing entry. */ - struct Tcl_HashEntry **bucketPtr; /* Pointer to bucket that points to - * first entry in this entry's chain: - * used for deleting the entry. */ - ClientData clientData; /* Application stores something here - * with Tcl_SetHashValue. */ - union { /* Key has one of these forms: */ - char *oneWordValue; /* One-word value for key. */ - int words[1]; /* Multiple integer words for key. - * The actual size will be as large - * as necessary for this table's - * keys. */ - char string[4]; /* String for key. The actual size - * will be as large as needed to hold - * the key. */ - } key; /* MUST BE LAST FIELD IN RECORD!! */ -} Tcl_HashEntry; - -/* - * Structure definition for a hash table. Must be in tcl.h so clients - * can allocate space for these structures, but clients should never - * access any fields in this structure. - */ - -#define TCL_SMALL_HASH_TABLE 4 -typedef struct Tcl_HashTable { - Tcl_HashEntry **buckets; /* Pointer to bucket array. Each - * element points to first entry in - * bucket's hash chain, or NULL. */ - Tcl_HashEntry *staticBuckets[TCL_SMALL_HASH_TABLE]; - /* Bucket array used for small tables - * (to avoid mallocs and frees). */ - int numBuckets; /* Total number of buckets allocated - * at **bucketPtr. */ - int numEntries; /* Total number of entries present - * in table. */ - int rebuildSize; /* Enlarge table when numEntries gets - * to be this large. */ - int downShift; /* Shift count used in hashing - * function. Designed to use high- - * order bits of randomized keys. */ - int mask; /* Mask value used in hashing - * function. */ - int keyType; /* Type of keys used in this table. - * It's either TCL_STRING_KEYS, - * TCL_ONE_WORD_KEYS, or an integer - * giving the number of ints that - * is the size of the key. - */ - Tcl_HashEntry *(*findProc) _ANSI_ARGS_((struct Tcl_HashTable *tablePtr, - CONST char *key)); - Tcl_HashEntry *(*createProc) _ANSI_ARGS_((struct Tcl_HashTable *tablePtr, - CONST char *key, int *newPtr)); -} Tcl_HashTable; - -/* - * Structure definition for information used to keep track of searches - * through hash tables: - */ - -typedef struct Tcl_HashSearch { - Tcl_HashTable *tablePtr; /* Table being searched. */ - int nextIndex; /* Index of next bucket to be - * enumerated after present one. */ - Tcl_HashEntry *nextEntryPtr; /* Next entry to be enumerated in the - * the current bucket. */ -} Tcl_HashSearch; - -/* - * Acceptable key types for hash tables: - */ - -#define TCL_STRING_KEYS 0 -#define TCL_ONE_WORD_KEYS 1 - -/* - * Macros for clients to use to access fields of hash entries: - */ - -#define Tcl_GetHashValue(h) ((h)->clientData) -#define Tcl_SetHashValue(h, value) ((h)->clientData = (ClientData) (value)) -#define Tcl_GetHashKey(tablePtr, h) \ - ((char *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS) ? (h)->key.oneWordValue \ - : (h)->key.string)) - -/* - * Macros to use for clients to use to invoke find and create procedures - * for hash tables: - */ - -#define Tcl_FindHashEntry(tablePtr, key) \ - (*((tablePtr)->findProc))(tablePtr, key) -#define Tcl_CreateHashEntry(tablePtr, key, newPtr) \ - (*((tablePtr)->createProc))(tablePtr, key, newPtr) - -/* - * Flag values to pass to Tcl_DoOneEvent to disable searches - * for some kinds of events: - */ - -#define TCL_DONT_WAIT (1<<1) -#define TCL_WINDOW_EVENTS (1<<2) -#define TCL_FILE_EVENTS (1<<3) -#define TCL_TIMER_EVENTS (1<<4) -#define TCL_IDLE_EVENTS (1<<5) /* WAS 0x10 ???? */ -#define TCL_ALL_EVENTS (~TCL_DONT_WAIT) - -/* - * The following structure defines a generic event for the Tcl event - * system. These are the things that are queued in calls to Tcl_QueueEvent - * and serviced later by Tcl_DoOneEvent. There can be many different - * kinds of events with different fields, corresponding to window events, - * timer events, etc. The structure for a particular event consists of - * a Tcl_Event header followed by additional information specific to that - * event. - */ - -struct Tcl_Event { - Tcl_EventProc *proc; /* Procedure to call to service this event. */ - struct Tcl_Event *nextPtr; /* Next in list of pending events, or NULL. */ -}; - -/* - * Positions to pass to Tcl_QueueEvent: - */ - -typedef enum { - TCL_QUEUE_TAIL, TCL_QUEUE_HEAD, TCL_QUEUE_MARK -} Tcl_QueuePosition; - -/* - * Values to pass to Tcl_SetServiceMode to specify the behavior of notifier - * event routines. - */ - -#define TCL_SERVICE_NONE 0 -#define TCL_SERVICE_ALL 1 - -/* - * The following structure keeps is used to hold a time value, either as - * an absolute time (the number of seconds from the epoch) or as an - * elapsed time. On Unix systems the epoch is Midnight Jan 1, 1970 GMT. - * On Macintosh systems the epoch is Midnight Jan 1, 1904 GMT. - */ - -typedef struct Tcl_Time { - long sec; /* Seconds. */ - long usec; /* Microseconds. */ -} Tcl_Time; - -typedef void (Tcl_SetTimerProc) _ANSI_ARGS_((Tcl_Time *timePtr)); -typedef int (Tcl_WaitForEventProc) _ANSI_ARGS_((Tcl_Time *timePtr)); - -/* - * Bits to pass to Tcl_CreateFileHandler and Tcl_CreateChannelHandler - * to indicate what sorts of events are of interest: - */ - -#define TCL_READABLE (1<<1) -#define TCL_WRITABLE (1<<2) -#define TCL_EXCEPTION (1<<3) - -/* - * Flag values to pass to Tcl_OpenCommandChannel to indicate the - * disposition of the stdio handles. TCL_STDIN, TCL_STDOUT, TCL_STDERR, - * are also used in Tcl_GetStdChannel. - */ - -#define TCL_STDIN (1<<1) -#define TCL_STDOUT (1<<2) -#define TCL_STDERR (1<<3) -#define TCL_ENFORCE_MODE (1<<4) - -/* - * Bits passed to Tcl_DriverClose2Proc to indicate which side of a channel - * should be closed. - */ - -#define TCL_CLOSE_READ (1<<1) -#define TCL_CLOSE_WRITE (1<<2) - -/* - * Value to use as the closeProc for a channel that supports the - * close2Proc interface. - */ - -#define TCL_CLOSE2PROC ((Tcl_DriverCloseProc *)1) - -/* - * Typedefs for the various operations in a channel type: - */ - -typedef int (Tcl_DriverBlockModeProc) _ANSI_ARGS_(( - ClientData instanceData, int mode)); -typedef int (Tcl_DriverCloseProc) _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp)); -typedef int (Tcl_DriverClose2Proc) _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp, int flags)); -typedef int (Tcl_DriverInputProc) _ANSI_ARGS_((ClientData instanceData, - char *buf, int toRead, int *errorCodePtr)); -typedef int (Tcl_DriverOutputProc) _ANSI_ARGS_((ClientData instanceData, - char *buf, int toWrite, int *errorCodePtr)); -typedef int (Tcl_DriverSeekProc) _ANSI_ARGS_((ClientData instanceData, - long offset, int mode, int *errorCodePtr)); -typedef int (Tcl_DriverSetOptionProc) _ANSI_ARGS_(( - ClientData instanceData, Tcl_Interp *interp, - char *optionName, char *value)); -typedef int (Tcl_DriverGetOptionProc) _ANSI_ARGS_(( - ClientData instanceData, Tcl_Interp *interp, - char *optionName, Tcl_DString *dsPtr)); -typedef void (Tcl_DriverWatchProc) _ANSI_ARGS_(( - ClientData instanceData, int mask)); -typedef int (Tcl_DriverGetHandleProc) _ANSI_ARGS_(( - ClientData instanceData, int direction, - ClientData *handlePtr)); - -/* - * The following declarations either map ckalloc and ckfree to - * malloc and free, or they map them to procedures with all sorts - * of debugging hooks defined in tclCkalloc.c. - */ - -#ifdef TCL_MEM_DEBUG - -# define ckalloc(x) Tcl_DbCkalloc(x, __FILE__, __LINE__) -# define ckfree(x) Tcl_DbCkfree(x, __FILE__, __LINE__) -# define ckrealloc(x,y) Tcl_DbCkrealloc((x), (y),__FILE__, __LINE__) - -#else /* !TCL_MEM_DEBUG */ - -/* - * If we are not using the debugging allocator, we should call the - * Tcl_Alloc, et al. routines in order to guarantee that every module - * is using the same memory allocator both inside and outside of the - * Tcl library. - */ - -# define ckalloc(x) Tcl_Alloc(x) -# define ckfree(x) Tcl_Free(x) -# define ckrealloc(x,y) Tcl_Realloc(x,y) -# define Tcl_InitMemory(x) -# define Tcl_DumpActiveMemory(x) -# define Tcl_ValidateAllMemory(x,y) - -#endif /* !TCL_MEM_DEBUG */ - -/* - * Enum for different end of line translation and recognition modes. - */ - -typedef enum Tcl_EolTranslation { - TCL_TRANSLATE_AUTO, /* Eol == \r, \n and \r\n. */ - TCL_TRANSLATE_CR, /* Eol == \r. */ - TCL_TRANSLATE_LF, /* Eol == \n. */ - TCL_TRANSLATE_CRLF /* Eol == \r\n. */ -} Tcl_EolTranslation; - -/* - * struct Tcl_ChannelType: - * - * One such structure exists for each type (kind) of channel. - * It collects together in one place all the functions that are - * part of the specific channel type. - */ - -typedef struct Tcl_ChannelType { - char *typeName; /* The name of the channel type in Tcl - * commands. This storage is owned by - * channel type. */ - Tcl_DriverBlockModeProc *blockModeProc; - /* Set blocking mode for the - * raw channel. May be NULL. */ - Tcl_DriverCloseProc *closeProc; /* Procedure to call to close the - * channel, or TCL_CLOSE2PROC if the - * close2Proc should be used - * instead. */ - Tcl_DriverInputProc *inputProc; /* Procedure to call for input - * on channel. */ - Tcl_DriverOutputProc *outputProc; /* Procedure to call for output - * on channel. */ - Tcl_DriverSeekProc *seekProc; /* Procedure to call to seek - * on the channel. May be NULL. */ - Tcl_DriverSetOptionProc *setOptionProc; - /* Set an option on a channel. */ - Tcl_DriverGetOptionProc *getOptionProc; - /* Get an option from a channel. */ - Tcl_DriverWatchProc *watchProc; /* Set up the notifier to watch - * for events on this channel. */ - Tcl_DriverGetHandleProc *getHandleProc; - /* Get an OS handle from the channel - * or NULL if not supported. */ - Tcl_DriverClose2Proc *close2Proc; /* Procedure to call to close the - * channel if the device supports - * closing the read & write sides - * independently. */ -} Tcl_ChannelType; - -/* - * The following flags determine whether the blockModeProc above should - * set the channel into blocking or nonblocking mode. They are passed - * as arguments to the blockModeProc procedure in the above structure. - */ - -#define TCL_MODE_BLOCKING 0 /* Put channel into blocking mode. */ -#define TCL_MODE_NONBLOCKING 1 /* Put channel into nonblocking - * mode. */ - -/* - * Enum for different types of file paths. - */ - -typedef enum Tcl_PathType { - TCL_PATH_ABSOLUTE, - TCL_PATH_RELATIVE, - TCL_PATH_VOLUME_RELATIVE -} Tcl_PathType; - -/* - * The following structure represents the Notifier functions that - * you can override with the Tcl_SetNotifier call. - */ - -typedef struct Tcl_NotifierProcs { - Tcl_SetTimerProc *setTimerProc; - Tcl_WaitForEventProc *waitForEventProc; - Tcl_CreateFileHandlerProc *createFileHandlerProc; - Tcl_DeleteFileHandlerProc *deleteFileHandlerProc; -} Tcl_NotifierProcs; - -/* - * The following structure represents a user-defined encoding. It collects - * together all the functions that are used by the specific encoding. - */ - -typedef struct Tcl_EncodingType { - CONST char *encodingName; /* The name of the encoding, e.g. "euc-jp". - * This name is the unique key for this - * encoding type. */ - Tcl_EncodingConvertProc *toUtfProc; - /* Procedure to convert from external - * encoding into UTF-8. */ - Tcl_EncodingConvertProc *fromUtfProc; - /* Procedure to convert from UTF-8 into - * external encoding. */ - Tcl_EncodingFreeProc *freeProc; - /* If non-NULL, procedure to call when this - * encoding is deleted. */ - ClientData clientData; /* Arbitrary value associated with encoding - * type. Passed to conversion procedures. */ - int nullSize; /* Number of zero bytes that signify - * end-of-string in this encoding. This - * number is used to determine the source - * string length when the srcLen argument is - * negative. Must be 1 or 2. */ -} Tcl_EncodingType; - -/* - * The following definitions are used as values for the conversion control - * flags argument when converting text from one character set to another: - * - * TCL_ENCODING_START: Signifies that the source buffer is the first - * block in a (potentially multi-block) input - * stream. Tells the conversion procedure to - * reset to an initial state and perform any - * initialization that needs to occur before the - * first byte is converted. If the source - * buffer contains the entire input stream to be - * converted, this flag should be set. - * - * TCL_ENCODING_END: Signifies that the source buffer is the last - * block in a (potentially multi-block) input - * stream. Tells the conversion routine to - * perform any finalization that needs to occur - * after the last byte is converted and then to - * reset to an initial state. If the source - * buffer contains the entire input stream to be - * converted, this flag should be set. - * - * TCL_ENCODING_STOPONERROR: If set, then the converter will return - * immediately upon encountering an invalid - * byte sequence or a source character that has - * no mapping in the target encoding. If clear, - * then the converter will skip the problem, - * substituting one or more "close" characters - * in the destination buffer and then continue - * to sonvert the source. - */ - -#define TCL_ENCODING_START 0x01 -#define TCL_ENCODING_END 0x02 -#define TCL_ENCODING_STOPONERROR 0x04 - -/* - *---------------------------------------------------------------- - * The following data structures and declarations are for the new - * Tcl parser. This stuff should all move to tcl.h eventually. - *---------------------------------------------------------------- - */ - -/* - * For each word of a command, and for each piece of a word such as a - * variable reference, one of the following structures is created to - * describe the token. - */ - -typedef struct Tcl_Token { - int type; /* Type of token, such as TCL_TOKEN_WORD; - * see below for valid types. */ - char *start; /* First character in token. */ - int size; /* Number of bytes in token. */ - int numComponents; /* If this token is composed of other - * tokens, this field tells how many of - * them there are (including components of - * components, etc.). The component tokens - * immediately follow this one. */ -} Tcl_Token; - -/* - * Type values defined for Tcl_Token structures. These values are - * defined as mask bits so that it's easy to check for collections of - * types. - * - * TCL_TOKEN_WORD - The token describes one word of a command, - * from the first non-blank character of - * the word (which may be " or {) up to but - * not including the space, semicolon, or - * bracket that terminates the word. - * NumComponents counts the total number of - * sub-tokens that make up the word. This - * includes, for example, sub-tokens of - * TCL_TOKEN_VARIABLE tokens. - * TCL_TOKEN_SIMPLE_WORD - This token is just like TCL_TOKEN_WORD - * except that the word is guaranteed to - * consist of a single TCL_TOKEN_TEXT - * sub-token. - * TCL_TOKEN_TEXT - The token describes a range of literal - * text that is part of a word. - * NumComponents is always 0. - * TCL_TOKEN_BS - The token describes a backslash sequence - * that must be collapsed. NumComponents - * is always 0. - * TCL_TOKEN_COMMAND - The token describes a command whose result - * must be substituted into the word. The - * token includes the enclosing brackets. - * NumComponents is always 0. - * TCL_TOKEN_VARIABLE - The token describes a variable - * substitution, including the dollar sign, - * variable name, and array index (if there - * is one) up through the right - * parentheses. NumComponents tells how - * many additional tokens follow to - * represent the variable name. The first - * token will be a TCL_TOKEN_TEXT token - * that describes the variable name. If - * the variable is an array reference then - * there will be one or more additional - * tokens, of type TCL_TOKEN_TEXT, - * TCL_TOKEN_BS, TCL_TOKEN_COMMAND, and - * TCL_TOKEN_VARIABLE, that describe the - * array index; numComponents counts the - * total number of nested tokens that make - * up the variable reference, including - * sub-tokens of TCL_TOKEN_VARIABLE tokens. - * TCL_TOKEN_SUB_EXPR - The token describes one subexpression of a - * expression, from the first non-blank - * character of the subexpression up to but not - * including the space, brace, or bracket - * that terminates the subexpression. - * NumComponents counts the total number of - * following subtokens that make up the - * subexpression; this includes all subtokens - * for any nested TCL_TOKEN_SUB_EXPR tokens. - * For example, a numeric value used as a - * primitive operand is described by a - * TCL_TOKEN_SUB_EXPR token followed by a - * TCL_TOKEN_TEXT token. A binary subexpression - * is described by a TCL_TOKEN_SUB_EXPR token - * followed by the TCL_TOKEN_OPERATOR token - * for the operator, then TCL_TOKEN_SUB_EXPR - * tokens for the left then the right operands. - * TCL_TOKEN_OPERATOR - The token describes one expression operator. - * An operator might be the name of a math - * function such as "abs". A TCL_TOKEN_OPERATOR - * token is always preceeded by one - * TCL_TOKEN_SUB_EXPR token for the operator's - * subexpression, and is followed by zero or - * more TCL_TOKEN_SUB_EXPR tokens for the - * operator's operands. NumComponents is - * always 0. - */ - -#define TCL_TOKEN_WORD 1 -#define TCL_TOKEN_SIMPLE_WORD 2 -#define TCL_TOKEN_TEXT 4 -#define TCL_TOKEN_BS 8 -#define TCL_TOKEN_COMMAND 16 -#define TCL_TOKEN_VARIABLE 32 -#define TCL_TOKEN_SUB_EXPR 64 -#define TCL_TOKEN_OPERATOR 128 - -/* - * Parsing error types. On any parsing error, one of these values - * will be stored in the error field of the Tcl_Parse structure - * defined below. - */ - -#define TCL_PARSE_SUCCESS 0 -#define TCL_PARSE_QUOTE_EXTRA 1 -#define TCL_PARSE_BRACE_EXTRA 2 -#define TCL_PARSE_MISSING_BRACE 3 -#define TCL_PARSE_MISSING_BRACKET 4 -#define TCL_PARSE_MISSING_PAREN 5 -#define TCL_PARSE_MISSING_QUOTE 6 -#define TCL_PARSE_MISSING_VAR_BRACE 7 -#define TCL_PARSE_SYNTAX 8 -#define TCL_PARSE_BAD_NUMBER 9 - -/* - * A structure of the following type is filled in by Tcl_ParseCommand. - * It describes a single command parsed from an input string. - */ - -#define NUM_STATIC_TOKENS 20 - -typedef struct Tcl_Parse { - char *commentStart; /* Pointer to # that begins the first of - * one or more comments preceding the - * command. */ - int commentSize; /* Number of bytes in comments (up through - * newline character that terminates the - * last comment). If there were no - * comments, this field is 0. */ - char *commandStart; /* First character in first word of command. */ - int commandSize; /* Number of bytes in command, including - * first character of first word, up - * through the terminating newline, - * close bracket, or semicolon. */ - int numWords; /* Total number of words in command. May - * be 0. */ - Tcl_Token *tokenPtr; /* Pointer to first token representing - * the words of the command. Initially - * points to staticTokens, but may change - * to point to malloc-ed space if command - * exceeds space in staticTokens. */ - int numTokens; /* Total number of tokens in command. */ - int tokensAvailable; /* Total number of tokens available at - * *tokenPtr. */ - int errorType; /* One of the parsing error types defined - * above. */ - - /* - * The fields below are intended only for the private use of the - * parser. They should not be used by procedures that invoke - * Tcl_ParseCommand. - */ - - char *string; /* The original command string passed to - * Tcl_ParseCommand. */ - char *end; /* Points to the character just after the - * last one in the command string. */ - Tcl_Interp *interp; /* Interpreter to use for error reporting, - * or NULL. */ - char *term; /* Points to character in string that - * terminated most recent token. Filled in - * by ParseTokens. If an error occurs, - * points to beginning of region where the - * error occurred (e.g. the open brace if - * the close brace is missing). */ - int incomplete; /* This field is set to 1 by Tcl_ParseCommand - * if the command appears to be incomplete. - * This information is used by - * Tcl_CommandComplete. */ - Tcl_Token staticTokens[NUM_STATIC_TOKENS]; - /* Initial space for tokens for command. - * This space should be large enough to - * accommodate most commands; dynamic - * space is allocated for very large - * commands that don't fit here. */ -} Tcl_Parse; - -/* - * The following definitions are the error codes returned by the conversion - * routines: - * - * TCL_OK: All characters were converted. - * - * TCL_CONVERT_NOSPACE: The output buffer would not have been large - * enough for all of the converted data; as many - * characters as could fit were converted though. - * - * TCL_CONVERT_MULTIBYTE: The last few bytes in the source string were - * the beginning of a multibyte sequence, but - * more bytes were needed to complete this - * sequence. A subsequent call to the conversion - * routine should pass the beginning of this - * unconverted sequence plus additional bytes - * from the source stream to properly convert - * the formerly split-up multibyte sequence. - * - * TCL_CONVERT_SYNTAX: The source stream contained an invalid - * character sequence. This may occur if the - * input stream has been damaged or if the input - * encoding method was misidentified. This error - * is reported only if TCL_ENCODING_STOPONERROR - * was specified. - * - * TCL_CONVERT_UNKNOWN: The source string contained a character - * that could not be represented in the target - * encoding. This error is reported only if - * TCL_ENCODING_STOPONERROR was specified. - */ - -#define TCL_CONVERT_MULTIBYTE -1 -#define TCL_CONVERT_SYNTAX -2 -#define TCL_CONVERT_UNKNOWN -3 -#define TCL_CONVERT_NOSPACE -4 - -/* - * The maximum number of bytes that are necessary to represent a single - * Unicode character in UTF-8. - */ - -#define TCL_UTF_MAX 3 - -/* - * This represents a Unicode character. - */ - -typedef unsigned short Tcl_UniChar; - -/* - * Deprecated Tcl procedures: - */ - -#ifndef TCL_NO_DEPRECATED -#define Tcl_EvalObj(interp,objPtr) Tcl_EvalObjEx((interp),(objPtr),0) -#define Tcl_GlobalEvalObj(interp,objPtr) \ - Tcl_EvalObjEx((interp),(objPtr),TCL_EVAL_GLOBAL) -#endif - -/* - * These function have been renamed. The old names are deprecated, but we - * define these macros for backwards compatibilty. - */ - -#define Tcl_Ckalloc Tcl_Alloc -#define Tcl_Ckfree Tcl_Free -#define Tcl_Ckrealloc Tcl_Realloc -#define Tcl_Return Tcl_SetResult -#define Tcl_TildeSubst Tcl_TranslateFileName -#define panic Tcl_Panic -#define panicVA Tcl_PanicVA - -/* - * The following constant is used to test for older versions of Tcl - * in the stubs tables. - * - * Jan Nijtman's plus patch uses 0xFCA1BACF, so we need to pick a different - * value since the stubs tables don't match. - */ - -#define TCL_STUB_MAGIC 0xFCA3BACF - -/* - * The following function is required to be defined in all stubs aware - * extensions. The function is actually implemented in the stub - * library, not the main Tcl library, although there is a trivial - * implementation in the main library in case an extension is statically - * linked into an application. - */ - -EXTERN char * Tcl_InitStubs _ANSI_ARGS_((Tcl_Interp *interp, - char *version, int exact)); - -#ifndef USE_TCL_STUBS - -/* - * When not using stubs, make it a macro. - */ - -#define Tcl_InitStubs(interp, version, exact) \ - Tcl_PkgRequire(interp, "Tcl", version, exact) - -#endif - - -/* - * Include the public function declarations that are accessible via - * the stubs table. - */ - -#include "tclDecls.h" - -/* - * Public functions that are not accessible via the stubs table. - */ - -EXTERN void Tcl_Main _ANSI_ARGS_((int argc, char **argv, - Tcl_AppInitProc *appInitProc)); - -/* - * Convenience declaration of Tcl_AppInit for backwards compatibility. - * This function is not *implemented* by the tcl library, so the storage - * class is neither DLLEXPORT nor DLLIMPORT - */ - -#undef TCL_STORAGE_CLASS -#define TCL_STORAGE_CLASS - -EXTERN int Tcl_AppInit _ANSI_ARGS_((Tcl_Interp *interp)); - -#endif /* RESOURCE_INCLUDED */ - -#undef TCL_STORAGE_CLASS -#define TCL_STORAGE_CLASS DLLIMPORT - -/* - * end block for C++ - */ - -#ifdef __cplusplus -} -#endif - -#endif /* _TCL */ - -/* $History: tcl.h $ - * - * ***************** Version 1 ***************** - * User: Dtashley Date: 1/02/01 Time: 12:16a - * Created in $/IjuScripter, IjuConsole/Source/Tcl Base - * Initial check-in. - */ - - /* End of TCL.H */ \ No newline at end of file +/* $Header$ */ +/* + * tcl.h -- + * + * This header file describes the externally-visible facilities + * of the Tcl interpreter. + * + * Copyright (c) 1987-1994 The Regents of the University of California. + * Copyright (c) 1993-1996 Lucent Technologies. + * Copyright (c) 1994-1998 Sun Microsystems, Inc. + * Copyright (c) 1998-2000 by Scriptics Corporation. + * + * See the file "license.terms" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * + * RCS: @(#) $Id: tcl.h,v 1.1.1.1 2001/06/13 04:32:55 dtashley Exp $ + */ + +#ifndef _TCL +#define _TCL + +/* + * For C++ compilers, use extern "C" + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * The following defines are used to indicate the various release levels. + */ + +#define TCL_ALPHA_RELEASE 0 +#define TCL_BETA_RELEASE 1 +#define TCL_FINAL_RELEASE 2 + +/* + * When version numbers change here, must also go into the following files + * and update the version numbers: + * + * library/init.tcl (only if Major.minor changes, not patchlevel) 1 LOC + * unix/configure.in (2 LOC Major, 2 LOC minor, 1 LOC patch) + * win/configure.in (as above) + * win/tcl.m4 (not patchlevel) + * win/makefile.vc (not patchlevel) 2 LOC + * win/pkgIndex.tcl (not patchlevel, for tclregNN.dll) + * README (sections 0 and 2) + * mac/README (2 LOC, not patchlevel) + * win/README.binary (sections 0-4) + * win/README (not patchlevel) (sections 0 and 2) + * unix/README (not patchlevel) (part (h)) + * unix/tcl.spec (2 LOC Major/Minor, 1 LOC patch) + * tests/basic.test (not patchlevel) (version checks) + * tools/tcl.hpj.in (not patchlevel, for windows installer) + * tools/tcl.wse.in (for windows installer) + * tools/tclSplash.bmp (not patchlevel) + */ + +#define TCL_MAJOR_VERSION 8 +#define TCL_MINOR_VERSION 3 +#define TCL_RELEASE_LEVEL TCL_FINAL_RELEASE +#define TCL_RELEASE_SERIAL 1 + +#define TCL_VERSION "8.3" +#define TCL_PATCH_LEVEL "8.3.1" + +/* + * The following definitions set up the proper options for Windows + * compilers. We use this method because there is no autoconf equivalent. + */ + +#ifndef __WIN32__ +# if defined(_WIN32) || defined(WIN32) +# define __WIN32__ +# endif +#endif + +#ifdef __WIN32__ +# ifndef STRICT +# define STRICT +# endif +# ifndef USE_PROTOTYPE +# define USE_PROTOTYPE 1 +# endif +# ifndef HAS_STDARG +# define HAS_STDARG 1 +# endif +# ifndef USE_PROTOTYPE +# define USE_PROTOTYPE 1 +# endif + +/* + * Under Windows we need to call Tcl_Alloc in all cases to avoid competing + * C run-time library issues. + */ + +# ifndef USE_TCLALLOC +# define USE_TCLALLOC 0 + /* Changed to 0 so could swap in new alloc module, DTA, + ** 07/06/00. + */ +# endif +#endif /* __WIN32__ */ + +/* + * The following definitions set up the proper options for Macintosh + * compilers. We use this method because there is no autoconf equivalent. + */ + +#ifdef MAC_TCL +# ifndef HAS_STDARG +# define HAS_STDARG 1 +# endif +# ifndef USE_TCLALLOC +# define USE_TCLALLOC 1 +# endif +# ifndef NO_STRERROR +# define NO_STRERROR 1 +# endif +# define INLINE +#endif + +/* + * Utility macros: STRINGIFY takes an argument and wraps it in "" (double + * quotation marks), JOIN joins two arguments. + */ + +#define VERBATIM(x) x +#ifdef _MSC_VER +# define STRINGIFY(x) STRINGIFY1(x) +# define STRINGIFY1(x) #x +# define JOIN(a,b) JOIN1(a,b) +# define JOIN1(a,b) a##b +#else +# ifdef RESOURCE_INCLUDED +# define STRINGIFY(x) STRINGIFY1(x) +# define STRINGIFY1(x) #x +# define JOIN(a,b) JOIN1(a,b) +# define JOIN1(a,b) a##b +# else +# ifdef __STDC__ +# define STRINGIFY(x) #x +# define JOIN(a,b) a##b +# else +# define STRINGIFY(x) "x" +# define JOIN(a,b) VERBATIM(a)VERBATIM(b) +# endif +# endif +#endif + +/* + * Special macro to define mutexes, that doesn't do anything + * if we are not using threads. + */ + +#ifdef TCL_THREADS +#define TCL_DECLARE_MUTEX(name) static Tcl_Mutex name; +#else +#define TCL_DECLARE_MUTEX(name) +#endif + +/* + * Macros that eliminate the overhead of the thread synchronization + * functions when compiling without thread support. + */ + +#ifndef TCL_THREADS +#define Tcl_MutexLock(mutexPtr) +#define Tcl_MutexUnlock(mutexPtr) +#define Tcl_MutexFinalize(mutexPtr) +#define Tcl_ConditionNotify(condPtr) +#define Tcl_ConditionWait(condPtr, mutexPtr, timePtr) +#define Tcl_ConditionFinalize(condPtr) +#endif /* TCL_THREADS */ + +/* + * A special definition used to allow this header file to be included + * in resource files so that they can get obtain version information from + * this file. Resource compilers don't like all the C stuff, like typedefs + * and procedure declarations, that occur below. + */ + +#ifndef RESOURCE_INCLUDED + +#ifndef BUFSIZ +#include +#endif + +/* + * Definitions that allow Tcl functions with variable numbers of + * arguments to be used with either varargs.h or stdarg.h. TCL_VARARGS + * is used in procedure prototypes. TCL_VARARGS_DEF is used to declare + * the arguments in a function definiton: it takes the type and name of + * the first argument and supplies the appropriate argument declaration + * string for use in the function definition. TCL_VARARGS_START + * initializes the va_list data structure and returns the first argument. + */ + +#if defined(__STDC__) || defined(HAS_STDARG) +# include + +# define TCL_VARARGS(type, name) (type name, ...) +# define TCL_VARARGS_DEF(type, name) (type name, ...) +# define TCL_VARARGS_START(type, name, list) (va_start(list, name), name) +#else +# include + +# ifdef __cplusplus +# define TCL_VARARGS(type, name) (type name, ...) +# define TCL_VARARGS_DEF(type, name) (type va_alist, ...) +# else +# define TCL_VARARGS(type, name) () +# define TCL_VARARGS_DEF(type, name) (va_alist) +# endif +# define TCL_VARARGS_START(type, name, list) \ + (va_start(list), va_arg(list, type)) +#endif + +/* + * Macros used to declare a function to be exported by a DLL. + * Used by Windows, maps to no-op declarations on non-Windows systems. + * The default build on windows is for a DLL, which causes the DLLIMPORT + * and DLLEXPORT macros to be nonempty. To build a static library, the + * macro STATIC_BUILD should be defined. + */ + +#ifdef STATIC_BUILD +# define DLLIMPORT +# define DLLEXPORT +#else +# if defined(__WIN32__) && (defined(_MSC_VER) || (defined(__GNUC__) && defined(__declspec))) +# define DLLIMPORT __declspec(dllimport) +# define DLLEXPORT __declspec(dllexport) +# else +# define DLLIMPORT +# define DLLEXPORT +# endif +#endif + +/* + * These macros are used to control whether functions are being declared for + * import or export. If a function is being declared while it is being built + * to be included in a shared library, then it should have the DLLEXPORT + * storage class. If is being declared for use by a module that is going to + * link against the shared library, then it should have the DLLIMPORT storage + * class. If the symbol is beind declared for a static build or for use from a + * stub library, then the storage class should be empty. + * + * The convention is that a macro called BUILD_xxxx, where xxxx is the + * name of a library we are building, is set on the compile line for sources + * that are to be placed in the library. When this macro is set, the + * storage class will be set to DLLEXPORT. At the end of the header file, the + * storage class will be reset to DLLIMPORt. + */ + +#undef TCL_STORAGE_CLASS +#ifdef BUILD_tcl +# define TCL_STORAGE_CLASS DLLEXPORT +#else +# ifdef USE_TCL_STUBS +# define TCL_STORAGE_CLASS +# else +# define TCL_STORAGE_CLASS DLLIMPORT +# endif +#endif + +/* + * Definitions that allow this header file to be used either with or + * without ANSI C features like function prototypes. + */ + +#undef _ANSI_ARGS_ +#undef CONST +#ifndef INLINE +# define INLINE +#endif + +#if ((defined(__STDC__) || defined(SABER)) && !defined(NO_PROTOTYPE)) || defined(__cplusplus) || defined(USE_PROTOTYPE) +# define _USING_PROTOTYPES_ 1 +# define _ANSI_ARGS_(x) x +# define CONST const +#else +# define _ANSI_ARGS_(x) () +# define CONST +#endif + +/* + * Make sure EXTERN isn't defined elsewhere + */ +#ifdef EXTERN +#undef EXTERN +#endif /* EXTERN */ + +#ifdef __cplusplus +# define EXTERN extern "C" TCL_STORAGE_CLASS +#else +# define EXTERN extern TCL_STORAGE_CLASS +#endif + +/* + * Macro to use instead of "void" for arguments that must have + * type "void *" in ANSI C; maps them to type "char *" in + * non-ANSI systems. + */ +#ifndef __WIN32__ +#ifndef VOID +# ifdef __STDC__ +# define VOID void +# else +# define VOID char +# endif +#endif +#else /* __WIN32__ */ +/* + * The following code is copied from winnt.h + */ +#ifndef VOID +#define VOID void +typedef char CHAR; +typedef short SHORT; +typedef long LONG; +#endif +#endif /* __WIN32__ */ + +/* + * Miscellaneous declarations. + */ + +#ifndef NULL +#define NULL 0 +#endif + +#ifndef _CLIENTDATA +# if defined(__STDC__) || defined(__cplusplus) + typedef void *ClientData; +# else + typedef int *ClientData; +# endif /* __STDC__ */ +#define _CLIENTDATA +#endif + +/* + * Data structures defined opaquely in this module. The definitions below + * just provide dummy types. A few fields are made visible in Tcl_Interp + * structures, namely those used for returning a string result from + * commands. Direct access to the result field is discouraged in Tcl 8.0. + * The interpreter result is either an object or a string, and the two + * values are kept consistent unless some C code sets interp->result + * directly. Programmers should use either the procedure Tcl_GetObjResult() + * or Tcl_GetStringResult() to read the interpreter's result. See the + * SetResult man page for details. + * + * Note: any change to the Tcl_Interp definition below must be mirrored + * in the "real" definition in tclInt.h. + * + * Note: Tcl_ObjCmdProc procedures do not directly set result and freeProc. + * Instead, they set a Tcl_Obj member in the "real" structure that can be + * accessed with Tcl_GetObjResult() and Tcl_SetObjResult(). + */ + +typedef struct Tcl_Interp { + char *result; /* If the last command returned a string + * result, this points to it. */ + void (*freeProc) _ANSI_ARGS_((char *blockPtr)); + /* Zero means the string result is + * statically allocated. TCL_DYNAMIC means + * it was allocated with ckalloc and should + * be freed with ckfree. Other values give + * the address of procedure to invoke to + * free the result. Tcl_Eval must free it + * before executing next command. */ + int errorLine; /* When TCL_ERROR is returned, this gives + * the line number within the command where + * the error occurred (1 if first line). */ +} Tcl_Interp; + +typedef struct Tcl_AsyncHandler_ *Tcl_AsyncHandler; +typedef struct Tcl_Channel_ *Tcl_Channel; +typedef struct Tcl_Command_ *Tcl_Command; +typedef struct Tcl_Condition_ *Tcl_Condition; +typedef struct Tcl_EncodingState_ *Tcl_EncodingState; +typedef struct Tcl_Encoding_ *Tcl_Encoding; +typedef struct Tcl_Event Tcl_Event; +typedef struct Tcl_Mutex_ *Tcl_Mutex; +typedef struct Tcl_Pid_ *Tcl_Pid; +typedef struct Tcl_RegExp_ *Tcl_RegExp; +typedef struct Tcl_ThreadDataKey_ *Tcl_ThreadDataKey; +typedef struct Tcl_ThreadId_ *Tcl_ThreadId; +typedef struct Tcl_TimerToken_ *Tcl_TimerToken; +typedef struct Tcl_Trace_ *Tcl_Trace; +typedef struct Tcl_Var_ *Tcl_Var; + +/* + * Definition of the interface to procedures implementing threads. + * A procedure following this definition is given to each call of + * 'Tcl_CreateThread' and will be called as the main fuction of + * the new thread created by that call. + */ + +#ifdef MAC_TCL +typedef pascal void *(Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); +#elif defined __WIN32__ +typedef unsigned (__stdcall Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); +#else +typedef void (Tcl_ThreadCreateProc) _ANSI_ARGS_((ClientData clientData)); +#endif + + +/* + * Threading function return types used for abstracting away platform + * differences when writing a Tcl_ThreadCreateProc. See the NewThread + * function in generic/tclThreadTest.c for it's usage. + */ +#ifdef MAC_TCL +# define Tcl_ThreadCreateType pascal void * +# define TCL_THREAD_CREATE_RETURN return NULL +#elif defined __WIN32__ +# define Tcl_ThreadCreateType unsigned __stdcall +# define TCL_THREAD_CREATE_RETURN return 0 +#else +# define Tcl_ThreadCreateType void +# define TCL_THREAD_CREATE_RETURN +#endif + + + +/* + * Definition of values for default stacksize and the possible flags to be + * given to Tcl_CreateThread. + */ + +#define TCL_THREAD_STACK_DEFAULT (0) /* Use default size for stack */ +#define TCL_THREAD_NOFLAGS (0000) /* Standard flags, default behaviour */ +#define TCL_THREAD_JOINABLE (0001) /* Mark the thread as joinable */ + +/* + * Flag values passed to Tcl_GetRegExpFromObj. + */ + +#define TCL_REG_BASIC 000000 /* BREs (convenience) */ +#define TCL_REG_EXTENDED 000001 /* EREs */ +#define TCL_REG_ADVF 000002 /* advanced features in EREs */ +#define TCL_REG_ADVANCED 000003 /* AREs (which are also EREs) */ +#define TCL_REG_QUOTE 000004 /* no special characters, none */ +#define TCL_REG_NOCASE 000010 /* ignore case */ +#define TCL_REG_NOSUB 000020 /* don't care about subexpressions */ +#define TCL_REG_EXPANDED 000040 /* expanded format, white space & + * comments */ +#define TCL_REG_NLSTOP 000100 /* \n doesn't match . or [^ ] */ +#define TCL_REG_NLANCH 000200 /* ^ matches after \n, $ before */ +#define TCL_REG_NEWLINE 000300 /* newlines are line terminators */ +#define TCL_REG_CANMATCH 001000 /* report details on partial/limited + * matches */ + +/* + * The following flag is experimental and only intended for use by Expect. It + * will probably go away in a later release. + */ + +#define TCL_REG_BOSONLY 002000 /* prepend \A to pattern so it only + * matches at the beginning of the + * string. */ + +/* + * Flags values passed to Tcl_RegExpExecObj. + */ + +#define TCL_REG_NOTBOL 0001 /* Beginning of string does not match ^. */ +#define TCL_REG_NOTEOL 0002 /* End of string does not match $. */ + +/* + * Structures filled in by Tcl_RegExpInfo. Note that all offset values are + * relative to the start of the match string, not the beginning of the + * entire string. + */ + +typedef struct Tcl_RegExpIndices { + long start; /* character offset of first character in match */ + long end; /* character offset of first character after the + * match. */ +} Tcl_RegExpIndices; + +typedef struct Tcl_RegExpInfo { + int nsubs; /* number of subexpressions in the + * compiled expression */ + Tcl_RegExpIndices *matches; /* array of nsubs match offset + * pairs */ + long extendStart; /* The offset at which a subsequent + * match might begin. */ + long reserved; /* Reserved for later use. */ +} Tcl_RegExpInfo; + +/* + * Picky compilers complain if this typdef doesn't appear before the + * struct's reference in tclDecls.h. + */ + +typedef struct stat *Tcl_Stat_; + +/* + * When a TCL command returns, the interpreter contains a result from the + * command. Programmers are strongly encouraged to use one of the + * procedures Tcl_GetObjResult() or Tcl_GetStringResult() to read the + * interpreter's result. See the SetResult man page for details. Besides + * this result, the command procedure returns an integer code, which is + * one of the following: + * + * TCL_OK Command completed normally; the interpreter's + * result contains the command's result. + * TCL_ERROR The command couldn't be completed successfully; + * the interpreter's result describes what went wrong. + * TCL_RETURN The command requests that the current procedure + * return; the interpreter's result contains the + * procedure's return value. + * TCL_BREAK The command requests that the innermost loop + * be exited; the interpreter's result is meaningless. + * TCL_CONTINUE Go on to the next iteration of the current loop; + * the interpreter's result is meaningless. + */ + +#define TCL_OK 0 +#define TCL_ERROR 1 +#define TCL_RETURN 2 +#define TCL_BREAK 3 +#define TCL_CONTINUE 4 + +#define TCL_RESULT_SIZE 200 + +/* + * Argument descriptors for math function callbacks in expressions: + */ + +typedef enum {TCL_INT, TCL_DOUBLE, TCL_EITHER} Tcl_ValueType; +typedef struct Tcl_Value { + Tcl_ValueType type; /* Indicates intValue or doubleValue is + * valid, or both. */ + long intValue; /* Integer value. */ + double doubleValue; /* Double-precision floating value. */ +} Tcl_Value; + +/* + * Forward declaration of Tcl_Obj to prevent an error when the forward + * reference to Tcl_Obj is encountered in the procedure types declared + * below. + */ + +struct Tcl_Obj; + +/* + * Procedure types defined by Tcl: + */ + +typedef int (Tcl_AppInitProc) _ANSI_ARGS_((Tcl_Interp *interp)); +typedef int (Tcl_AsyncProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp, int code)); +typedef void (Tcl_ChannelProc) _ANSI_ARGS_((ClientData clientData, int mask)); +typedef void (Tcl_CloseProc) _ANSI_ARGS_((ClientData data)); +typedef void (Tcl_CmdDeleteProc) _ANSI_ARGS_((ClientData clientData)); +typedef int (Tcl_CmdProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp, int argc, char *argv[])); +typedef void (Tcl_CmdTraceProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp, int level, char *command, Tcl_CmdProc *proc, + ClientData cmdClientData, int argc, char *argv[])); +typedef void (Tcl_DupInternalRepProc) _ANSI_ARGS_((struct Tcl_Obj *srcPtr, + struct Tcl_Obj *dupPtr)); +typedef int (Tcl_EncodingConvertProc)_ANSI_ARGS_((ClientData clientData, + CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, + char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, + int *dstCharsPtr)); +typedef void (Tcl_EncodingFreeProc)_ANSI_ARGS_((ClientData clientData)); +typedef int (Tcl_EventProc) _ANSI_ARGS_((Tcl_Event *evPtr, int flags)); +typedef void (Tcl_EventCheckProc) _ANSI_ARGS_((ClientData clientData, + int flags)); +typedef int (Tcl_EventDeleteProc) _ANSI_ARGS_((Tcl_Event *evPtr, + ClientData clientData)); +typedef void (Tcl_EventSetupProc) _ANSI_ARGS_((ClientData clientData, + int flags)); +typedef void (Tcl_ExitProc) _ANSI_ARGS_((ClientData clientData)); +typedef void (Tcl_FileProc) _ANSI_ARGS_((ClientData clientData, int mask)); +typedef void (Tcl_FileFreeProc) _ANSI_ARGS_((ClientData clientData)); +typedef void (Tcl_FreeInternalRepProc) _ANSI_ARGS_((struct Tcl_Obj *objPtr)); +typedef void (Tcl_FreeProc) _ANSI_ARGS_((char *blockPtr)); +typedef void (Tcl_IdleProc) _ANSI_ARGS_((ClientData clientData)); +typedef void (Tcl_InterpDeleteProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp)); +typedef int (Tcl_MathProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp, Tcl_Value *args, Tcl_Value *resultPtr)); +typedef void (Tcl_NamespaceDeleteProc) _ANSI_ARGS_((ClientData clientData)); +typedef int (Tcl_ObjCmdProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp, int objc, struct Tcl_Obj *CONST objv[])); +typedef int (Tcl_PackageInitProc) _ANSI_ARGS_((Tcl_Interp *interp)); +typedef void (Tcl_PanicProc) _ANSI_ARGS_(TCL_VARARGS(char *, format)); +typedef void (Tcl_TcpAcceptProc) _ANSI_ARGS_((ClientData callbackData, + Tcl_Channel chan, char *address, int port)); +typedef void (Tcl_TimerProc) _ANSI_ARGS_((ClientData clientData)); +typedef int (Tcl_SetFromAnyProc) _ANSI_ARGS_((Tcl_Interp *interp, + struct Tcl_Obj *objPtr)); +typedef void (Tcl_UpdateStringProc) _ANSI_ARGS_((struct Tcl_Obj *objPtr)); +typedef char *(Tcl_VarTraceProc) _ANSI_ARGS_((ClientData clientData, + Tcl_Interp *interp, char *part1, char *part2, int flags)); +typedef void (Tcl_CreateFileHandlerProc) _ANSI_ARGS_((int fd, int mask, + Tcl_FileProc *proc, ClientData clientData)); +typedef void (Tcl_DeleteFileHandlerProc) _ANSI_ARGS_((int fd)); + +/* + * The following structure represents a type of object, which is a + * particular internal representation for an object plus a set of + * procedures that provide standard operations on objects of that type. + */ + +typedef struct Tcl_ObjType { + char *name; /* Name of the type, e.g. "int". */ + Tcl_FreeInternalRepProc *freeIntRepProc; + /* Called to free any storage for the type's + * internal rep. NULL if the internal rep + * does not need freeing. */ + Tcl_DupInternalRepProc *dupIntRepProc; + /* Called to create a new object as a copy + * of an existing object. */ + Tcl_UpdateStringProc *updateStringProc; + /* Called to update the string rep from the + * type's internal representation. */ + Tcl_SetFromAnyProc *setFromAnyProc; + /* Called to convert the object's internal + * rep to this type. Frees the internal rep + * of the old type. Returns TCL_ERROR on + * failure. */ +} Tcl_ObjType; + +/* + * One of the following structures exists for each object in the Tcl + * system. An object stores a value as either a string, some internal + * representation, or both. + */ + +typedef struct Tcl_Obj { + int refCount; /* When 0 the object will be freed. */ + char *bytes; /* This points to the first byte of the + * object's string representation. The array + * must be followed by a null byte (i.e., at + * offset length) but may also contain + * embedded null characters. The array's + * storage is allocated by ckalloc. NULL + * means the string rep is invalid and must + * be regenerated from the internal rep. + * Clients should use Tcl_GetStringFromObj + * or Tcl_GetString to get a pointer to the + * byte array as a readonly value. */ + int length; /* The number of bytes at *bytes, not + * including the terminating null. */ + Tcl_ObjType *typePtr; /* Denotes the object's type. Always + * corresponds to the type of the object's + * internal rep. NULL indicates the object + * has no internal rep (has no type). */ + union { /* The internal representation: */ + long longValue; /* - an long integer value */ + double doubleValue; /* - a double-precision floating value */ + VOID *otherValuePtr; /* - another, type-specific value */ + struct { /* - internal rep as two pointers */ + VOID *ptr1; + VOID *ptr2; + } twoPtrValue; + } internalRep; +} Tcl_Obj; + +/* + * Macros to increment and decrement a Tcl_Obj's reference count, and to + * test whether an object is shared (i.e. has reference count > 1). + * Note: clients should use Tcl_DecrRefCount() when they are finished using + * an object, and should never call TclFreeObj() directly. TclFreeObj() is + * only defined and made public in tcl.h to support Tcl_DecrRefCount's macro + * definition. Note also that Tcl_DecrRefCount() refers to the parameter + * "obj" twice. This means that you should avoid calling it with an + * expression that is expensive to compute or has side effects. + */ + +void Tcl_IncrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr)); +void Tcl_DecrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr)); +int Tcl_IsShared _ANSI_ARGS_((Tcl_Obj *objPtr)); + +#ifdef TCL_MEM_DEBUG +# define Tcl_IncrRefCount(objPtr) \ + Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__) +# define Tcl_DecrRefCount(objPtr) \ + Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__) +# define Tcl_IsShared(objPtr) \ + Tcl_DbIsShared(objPtr, __FILE__, __LINE__) +#else +# define Tcl_IncrRefCount(objPtr) \ + ++(objPtr)->refCount +# define Tcl_DecrRefCount(objPtr) \ + if (--(objPtr)->refCount <= 0) TclFreeObj(objPtr) +# define Tcl_IsShared(objPtr) \ + ((objPtr)->refCount > 1) +#endif + +/* + * Macros and definitions that help to debug the use of Tcl objects. + * When TCL_MEM_DEBUG is defined, the Tcl_New declarations are + * overridden to call debugging versions of the object creation procedures. + */ + +#ifdef TCL_MEM_DEBUG +# define Tcl_NewBooleanObj(val) \ + Tcl_DbNewBooleanObj(val, __FILE__, __LINE__) +# define Tcl_NewByteArrayObj(bytes, len) \ + Tcl_DbNewByteArrayObj(bytes, len, __FILE__, __LINE__) +# define Tcl_NewDoubleObj(val) \ + Tcl_DbNewDoubleObj(val, __FILE__, __LINE__) +# define Tcl_NewIntObj(val) \ + Tcl_DbNewLongObj(val, __FILE__, __LINE__) +# define Tcl_NewListObj(objc, objv) \ + Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__) +# define Tcl_NewLongObj(val) \ + Tcl_DbNewLongObj(val, __FILE__, __LINE__) +# define Tcl_NewObj() \ + Tcl_DbNewObj(__FILE__, __LINE__) +# define Tcl_NewStringObj(bytes, len) \ + Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__) +#endif /* TCL_MEM_DEBUG */ + +/* + * The following structure contains the state needed by + * Tcl_SaveResult. No-one outside of Tcl should access any of these + * fields. This structure is typically allocated on the stack. + */ + +typedef struct Tcl_SavedResult { + char *result; + Tcl_FreeProc *freeProc; + Tcl_Obj *objResultPtr; + char *appendResult; + int appendAvl; + int appendUsed; + char resultSpace[TCL_RESULT_SIZE+1]; +} Tcl_SavedResult; + + +/* + * The following definitions support Tcl's namespace facility. + * Note: the first five fields must match exactly the fields in a + * Namespace structure (see tclInt.h). + */ + +typedef struct Tcl_Namespace { + char *name; /* The namespace's name within its parent + * namespace. This contains no ::'s. The + * name of the global namespace is "" + * although "::" is an synonym. */ + char *fullName; /* The namespace's fully qualified name. + * This starts with ::. */ + ClientData clientData; /* Arbitrary value associated with this + * namespace. */ + Tcl_NamespaceDeleteProc* deleteProc; + /* Procedure invoked when deleting the + * namespace to, e.g., free clientData. */ + struct Tcl_Namespace* parentPtr; + /* Points to the namespace that contains + * this one. NULL if this is the global + * namespace. */ +} Tcl_Namespace; + +/* + * The following structure represents a call frame, or activation record. + * A call frame defines a naming context for a procedure call: its local + * scope (for local variables) and its namespace scope (used for non-local + * variables; often the global :: namespace). A call frame can also define + * the naming context for a namespace eval or namespace inscope command: + * the namespace in which the command's code should execute. The + * Tcl_CallFrame structures exist only while procedures or namespace + * eval/inscope's are being executed, and provide a Tcl call stack. + * + * A call frame is initialized and pushed using Tcl_PushCallFrame and + * popped using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be + * provided by the Tcl_PushCallFrame caller, and callers typically allocate + * them on the C call stack for efficiency. For this reason, Tcl_CallFrame + * is defined as a structure and not as an opaque token. However, most + * Tcl_CallFrame fields are hidden since applications should not access + * them directly; others are declared as "dummyX". + * + * WARNING!! The structure definition must be kept consistent with the + * CallFrame structure in tclInt.h. If you change one, change the other. + */ + +typedef struct Tcl_CallFrame { + Tcl_Namespace *nsPtr; + int dummy1; + int dummy2; + char *dummy3; + char *dummy4; + char *dummy5; + int dummy6; + char *dummy7; + char *dummy8; + int dummy9; + char* dummy10; +} Tcl_CallFrame; + +/* + * Information about commands that is returned by Tcl_GetCommandInfo and + * passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based + * command procedure while proc is a traditional Tcl argc/argv + * string-based procedure. Tcl_CreateObjCommand and Tcl_CreateCommand + * ensure that both objProc and proc are non-NULL and can be called to + * execute the command. However, it may be faster to call one instead of + * the other. The member isNativeObjectProc is set to 1 if an + * object-based procedure was registered by Tcl_CreateObjCommand, and to + * 0 if a string-based procedure was registered by Tcl_CreateCommand. + * The other procedure is typically set to a compatibility wrapper that + * does string-to-object or object-to-string argument conversions then + * calls the other procedure. + */ + +typedef struct Tcl_CmdInfo { + int isNativeObjectProc; /* 1 if objProc was registered by a call to + * Tcl_CreateObjCommand; 0 otherwise. + * Tcl_SetCmdInfo does not modify this + * field. */ + Tcl_ObjCmdProc *objProc; /* Command's object-based procedure. */ + ClientData objClientData; /* ClientData for object proc. */ + Tcl_CmdProc *proc; /* Command's string-based procedure. */ + ClientData clientData; /* ClientData for string proc. */ + Tcl_CmdDeleteProc *deleteProc; + /* Procedure to call when command is + * deleted. */ + ClientData deleteData; /* Value to pass to deleteProc (usually + * the same as clientData). */ + Tcl_Namespace *namespacePtr; /* Points to the namespace that contains + * this command. Note that Tcl_SetCmdInfo + * will not change a command's namespace; + * use Tcl_RenameCommand to do that. */ + +} Tcl_CmdInfo; + +/* + * The structure defined below is used to hold dynamic strings. The only + * field that clients should use is the string field, and they should + * never modify it. + */ + +#define TCL_DSTRING_STATIC_SIZE 200 +typedef struct Tcl_DString { + char *string; /* Points to beginning of string: either + * staticSpace below or a malloced array. */ + int length; /* Number of non-NULL characters in the + * string. */ + int spaceAvl; /* Total number of bytes available for the + * string and its terminating NULL char. */ + char staticSpace[TCL_DSTRING_STATIC_SIZE]; + /* Space to use in common case where string + * is small. */ +} Tcl_DString; + +#define Tcl_DStringLength(dsPtr) ((dsPtr)->length) +#define Tcl_DStringValue(dsPtr) ((dsPtr)->string) +#define Tcl_DStringTrunc Tcl_DStringSetLength + +/* + * Definitions for the maximum number of digits of precision that may + * be specified in the "tcl_precision" variable, and the number of + * bytes of buffer space required by Tcl_PrintDouble. + */ + +#define TCL_MAX_PREC 17 +#define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10) + +/* + * Definition for a number of bytes of buffer space sufficient to hold the + * string representation of an integer in base 10 (assuming the existence + * of 64-bit integers). + */ + +#define TCL_INTEGER_SPACE 24 + +/* + * Flag that may be passed to Tcl_ConvertElement to force it not to + * output braces (careful! if you change this flag be sure to change + * the definitions at the front of tclUtil.c). + */ + +#define TCL_DONT_USE_BRACES 1 + +/* + * Flag that may be passed to Tcl_GetIndexFromObj to force it to disallow + * abbreviated strings. + */ + +#define TCL_EXACT 1 + +/* + * Flag values passed to Tcl_RecordAndEval and/or Tcl_EvalObj. + * WARNING: these bit choices must not conflict with the bit choices + * for evalFlag bits in tclInt.h!! + */ + +#define TCL_NO_EVAL 0x10000 +#define TCL_EVAL_GLOBAL 0x20000 +#define TCL_EVAL_DIRECT 0x40000 + +/* + * Special freeProc values that may be passed to Tcl_SetResult (see + * the man page for details): + */ + +#define TCL_VOLATILE ((Tcl_FreeProc *) 1) +#define TCL_STATIC ((Tcl_FreeProc *) 0) +#define TCL_DYNAMIC ((Tcl_FreeProc *) 3) + +/* + * Flag values passed to variable-related procedures. + */ + +#define TCL_GLOBAL_ONLY 1 +#define TCL_NAMESPACE_ONLY 2 +#define TCL_APPEND_VALUE 4 +#define TCL_LIST_ELEMENT 8 +#define TCL_TRACE_READS 0x10 +#define TCL_TRACE_WRITES 0x20 +#define TCL_TRACE_UNSETS 0x40 +#define TCL_TRACE_DESTROYED 0x80 +#define TCL_INTERP_DESTROYED 0x100 +#define TCL_LEAVE_ERR_MSG 0x200 +#define TCL_TRACE_ARRAY 0x800 + +/* + * The TCL_PARSE_PART1 flag is deprecated and has no effect. + * The part1 is now always parsed whenever the part2 is NULL. + * (This is to avoid a common error when converting code to + * use the new object based APIs and forgetting to give the + * flag) + */ +#ifndef TCL_NO_DEPRECATED +#define TCL_PARSE_PART1 0x400 +#endif + + +/* + * Types for linked variables: + */ + +#define TCL_LINK_INT 1 +#define TCL_LINK_DOUBLE 2 +#define TCL_LINK_BOOLEAN 3 +#define TCL_LINK_STRING 4 +#define TCL_LINK_READ_ONLY 0x80 + +/* + * Forward declaration of Tcl_HashTable. Needed by some C++ compilers + * to prevent errors when the forward reference to Tcl_HashTable is + * encountered in the Tcl_HashEntry structure. + */ + +#ifdef __cplusplus +struct Tcl_HashTable; +#endif + +/* + * Structure definition for an entry in a hash table. No-one outside + * Tcl should access any of these fields directly; use the macros + * defined below. + */ + +typedef struct Tcl_HashEntry { + struct Tcl_HashEntry *nextPtr; /* Pointer to next entry in this + * hash bucket, or NULL for end of + * chain. */ + struct Tcl_HashTable *tablePtr; /* Pointer to table containing entry. */ + struct Tcl_HashEntry **bucketPtr; /* Pointer to bucket that points to + * first entry in this entry's chain: + * used for deleting the entry. */ + ClientData clientData; /* Application stores something here + * with Tcl_SetHashValue. */ + union { /* Key has one of these forms: */ + char *oneWordValue; /* One-word value for key. */ + int words[1]; /* Multiple integer words for key. + * The actual size will be as large + * as necessary for this table's + * keys. */ + char string[4]; /* String for key. The actual size + * will be as large as needed to hold + * the key. */ + } key; /* MUST BE LAST FIELD IN RECORD!! */ +} Tcl_HashEntry; + +/* + * Structure definition for a hash table. Must be in tcl.h so clients + * can allocate space for these structures, but clients should never + * access any fields in this structure. + */ + +#define TCL_SMALL_HASH_TABLE 4 +typedef struct Tcl_HashTable { + Tcl_HashEntry **buckets; /* Pointer to bucket array. Each + * element points to first entry in + * bucket's hash chain, or NULL. */ + Tcl_HashEntry *staticBuckets[TCL_SMALL_HASH_TABLE]; + /* Bucket array used for small tables + * (to avoid mallocs and frees). */ + int numBuckets; /* Total number of buckets allocated + * at **bucketPtr. */ + int numEntries; /* Total number of entries present + * in table. */ + int rebuildSize; /* Enlarge table when numEntries gets + * to be this large. */ + int downShift; /* Shift count used in hashing + * function. Designed to use high- + * order bits of randomized keys. */ + int mask; /* Mask value used in hashing + * function. */ + int keyType; /* Type of keys used in this table. + * It's either TCL_STRING_KEYS, + * TCL_ONE_WORD_KEYS, or an integer + * giving the number of ints that + * is the size of the key. + */ + Tcl_HashEntry *(*findProc) _ANSI_ARGS_((struct Tcl_HashTable *tablePtr, + CONST char *key)); + Tcl_HashEntry *(*createProc) _ANSI_ARGS_((struct Tcl_HashTable *tablePtr, + CONST char *key, int *newPtr)); +} Tcl_HashTable; + +/* + * Structure definition for information used to keep track of searches + * through hash tables: + */ + +typedef struct Tcl_HashSearch { + Tcl_HashTable *tablePtr; /* Table being searched. */ + int nextIndex; /* Index of next bucket to be + * enumerated after present one. */ + Tcl_HashEntry *nextEntryPtr; /* Next entry to be enumerated in the + * the current bucket. */ +} Tcl_HashSearch; + +/* + * Acceptable key types for hash tables: + */ + +#define TCL_STRING_KEYS 0 +#define TCL_ONE_WORD_KEYS 1 + +/* + * Macros for clients to use to access fields of hash entries: + */ + +#define Tcl_GetHashValue(h) ((h)->clientData) +#define Tcl_SetHashValue(h, value) ((h)->clientData = (ClientData) (value)) +#define Tcl_GetHashKey(tablePtr, h) \ + ((char *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS) ? (h)->key.oneWordValue \ + : (h)->key.string)) + +/* + * Macros to use for clients to use to invoke find and create procedures + * for hash tables: + */ + +#define Tcl_FindHashEntry(tablePtr, key) \ + (*((tablePtr)->findProc))(tablePtr, key) +#define Tcl_CreateHashEntry(tablePtr, key, newPtr) \ + (*((tablePtr)->createProc))(tablePtr, key, newPtr) + +/* + * Flag values to pass to Tcl_DoOneEvent to disable searches + * for some kinds of events: + */ + +#define TCL_DONT_WAIT (1<<1) +#define TCL_WINDOW_EVENTS (1<<2) +#define TCL_FILE_EVENTS (1<<3) +#define TCL_TIMER_EVENTS (1<<4) +#define TCL_IDLE_EVENTS (1<<5) /* WAS 0x10 ???? */ +#define TCL_ALL_EVENTS (~TCL_DONT_WAIT) + +/* + * The following structure defines a generic event for the Tcl event + * system. These are the things that are queued in calls to Tcl_QueueEvent + * and serviced later by Tcl_DoOneEvent. There can be many different + * kinds of events with different fields, corresponding to window events, + * timer events, etc. The structure for a particular event consists of + * a Tcl_Event header followed by additional information specific to that + * event. + */ + +struct Tcl_Event { + Tcl_EventProc *proc; /* Procedure to call to service this event. */ + struct Tcl_Event *nextPtr; /* Next in list of pending events, or NULL. */ +}; + +/* + * Positions to pass to Tcl_QueueEvent: + */ + +typedef enum { + TCL_QUEUE_TAIL, TCL_QUEUE_HEAD, TCL_QUEUE_MARK +} Tcl_QueuePosition; + +/* + * Values to pass to Tcl_SetServiceMode to specify the behavior of notifier + * event routines. + */ + +#define TCL_SERVICE_NONE 0 +#define TCL_SERVICE_ALL 1 + +/* + * The following structure keeps is used to hold a time value, either as + * an absolute time (the number of seconds from the epoch) or as an + * elapsed time. On Unix systems the epoch is Midnight Jan 1, 1970 GMT. + * On Macintosh systems the epoch is Midnight Jan 1, 1904 GMT. + */ + +typedef struct Tcl_Time { + long sec; /* Seconds. */ + long usec; /* Microseconds. */ +} Tcl_Time; + +typedef void (Tcl_SetTimerProc) _ANSI_ARGS_((Tcl_Time *timePtr)); +typedef int (Tcl_WaitForEventProc) _ANSI_ARGS_((Tcl_Time *timePtr)); + +/* + * Bits to pass to Tcl_CreateFileHandler and Tcl_CreateChannelHandler + * to indicate what sorts of events are of interest: + */ + +#define TCL_READABLE (1<<1) +#define TCL_WRITABLE (1<<2) +#define TCL_EXCEPTION (1<<3) + +/* + * Flag values to pass to Tcl_OpenCommandChannel to indicate the + * disposition of the stdio handles. TCL_STDIN, TCL_STDOUT, TCL_STDERR, + * are also used in Tcl_GetStdChannel. + */ + +#define TCL_STDIN (1<<1) +#define TCL_STDOUT (1<<2) +#define TCL_STDERR (1<<3) +#define TCL_ENFORCE_MODE (1<<4) + +/* + * Bits passed to Tcl_DriverClose2Proc to indicate which side of a channel + * should be closed. + */ + +#define TCL_CLOSE_READ (1<<1) +#define TCL_CLOSE_WRITE (1<<2) + +/* + * Value to use as the closeProc for a channel that supports the + * close2Proc interface. + */ + +#define TCL_CLOSE2PROC ((Tcl_DriverCloseProc *)1) + +/* + * Typedefs for the various operations in a channel type: + */ + +typedef int (Tcl_DriverBlockModeProc) _ANSI_ARGS_(( + ClientData instanceData, int mode)); +typedef int (Tcl_DriverCloseProc) _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp)); +typedef int (Tcl_DriverClose2Proc) _ANSI_ARGS_((ClientData instanceData, + Tcl_Interp *interp, int flags)); +typedef int (Tcl_DriverInputProc) _ANSI_ARGS_((ClientData instanceData, + char *buf, int toRead, int *errorCodePtr)); +typedef int (Tcl_DriverOutputProc) _ANSI_ARGS_((ClientData instanceData, + char *buf, int toWrite, int *errorCodePtr)); +typedef int (Tcl_DriverSeekProc) _ANSI_ARGS_((ClientData instanceData, + long offset, int mode, int *errorCodePtr)); +typedef int (Tcl_DriverSetOptionProc) _ANSI_ARGS_(( + ClientData instanceData, Tcl_Interp *interp, + char *optionName, char *value)); +typedef int (Tcl_DriverGetOptionProc) _ANSI_ARGS_(( + ClientData instanceData, Tcl_Interp *interp, + char *optionName, Tcl_DString *dsPtr)); +typedef void (Tcl_DriverWatchProc) _ANSI_ARGS_(( + ClientData instanceData, int mask)); +typedef int (Tcl_DriverGetHandleProc) _ANSI_ARGS_(( + ClientData instanceData, int direction, + ClientData *handlePtr)); + +/* + * The following declarations either map ckalloc and ckfree to + * malloc and free, or they map them to procedures with all sorts + * of debugging hooks defined in tclCkalloc.c. + */ + +#ifdef TCL_MEM_DEBUG + +# define ckalloc(x) Tcl_DbCkalloc(x, __FILE__, __LINE__) +# define ckfree(x) Tcl_DbCkfree(x, __FILE__, __LINE__) +# define ckrealloc(x,y) Tcl_DbCkrealloc((x), (y),__FILE__, __LINE__) + +#else /* !TCL_MEM_DEBUG */ + +/* + * If we are not using the debugging allocator, we should call the + * Tcl_Alloc, et al. routines in order to guarantee that every module + * is using the same memory allocator both inside and outside of the + * Tcl library. + */ + +# define ckalloc(x) Tcl_Alloc(x) +# define ckfree(x) Tcl_Free(x) +# define ckrealloc(x,y) Tcl_Realloc(x,y) +# define Tcl_InitMemory(x) +# define Tcl_DumpActiveMemory(x) +# define Tcl_ValidateAllMemory(x,y) + +#endif /* !TCL_MEM_DEBUG */ + +/* + * Enum for different end of line translation and recognition modes. + */ + +typedef enum Tcl_EolTranslation { + TCL_TRANSLATE_AUTO, /* Eol == \r, \n and \r\n. */ + TCL_TRANSLATE_CR, /* Eol == \r. */ + TCL_TRANSLATE_LF, /* Eol == \n. */ + TCL_TRANSLATE_CRLF /* Eol == \r\n. */ +} Tcl_EolTranslation; + +/* + * struct Tcl_ChannelType: + * + * One such structure exists for each type (kind) of channel. + * It collects together in one place all the functions that are + * part of the specific channel type. + */ + +typedef struct Tcl_ChannelType { + char *typeName; /* The name of the channel type in Tcl + * commands. This storage is owned by + * channel type. */ + Tcl_DriverBlockModeProc *blockModeProc; + /* Set blocking mode for the + * raw channel. May be NULL. */ + Tcl_DriverCloseProc *closeProc; /* Procedure to call to close the + * channel, or TCL_CLOSE2PROC if the + * close2Proc should be used + * instead. */ + Tcl_DriverInputProc *inputProc; /* Procedure to call for input + * on channel. */ + Tcl_DriverOutputProc *outputProc; /* Procedure to call for output + * on channel. */ + Tcl_DriverSeekProc *seekProc; /* Procedure to call to seek + * on the channel. May be NULL. */ + Tcl_DriverSetOptionProc *setOptionProc; + /* Set an option on a channel. */ + Tcl_DriverGetOptionProc *getOptionProc; + /* Get an option from a channel. */ + Tcl_DriverWatchProc *watchProc; /* Set up the notifier to watch + * for events on this channel. */ + Tcl_DriverGetHandleProc *getHandleProc; + /* Get an OS handle from the channel + * or NULL if not supported. */ + Tcl_DriverClose2Proc *close2Proc; /* Procedure to call to close the + * channel if the device supports + * closing the read & write sides + * independently. */ +} Tcl_ChannelType; + +/* + * The following flags determine whether the blockModeProc above should + * set the channel into blocking or nonblocking mode. They are passed + * as arguments to the blockModeProc procedure in the above structure. + */ + +#define TCL_MODE_BLOCKING 0 /* Put channel into blocking mode. */ +#define TCL_MODE_NONBLOCKING 1 /* Put channel into nonblocking + * mode. */ + +/* + * Enum for different types of file paths. + */ + +typedef enum Tcl_PathType { + TCL_PATH_ABSOLUTE, + TCL_PATH_RELATIVE, + TCL_PATH_VOLUME_RELATIVE +} Tcl_PathType; + +/* + * The following structure represents the Notifier functions that + * you can override with the Tcl_SetNotifier call. + */ + +typedef struct Tcl_NotifierProcs { + Tcl_SetTimerProc *setTimerProc; + Tcl_WaitForEventProc *waitForEventProc; + Tcl_CreateFileHandlerProc *createFileHandlerProc; + Tcl_DeleteFileHandlerProc *deleteFileHandlerProc; +} Tcl_NotifierProcs; + +/* + * The following structure represents a user-defined encoding. It collects + * together all the functions that are used by the specific encoding. + */ + +typedef struct Tcl_EncodingType { + CONST char *encodingName; /* The name of the encoding, e.g. "euc-jp". + * This name is the unique key for this + * encoding type. */ + Tcl_EncodingConvertProc *toUtfProc; + /* Procedure to convert from external + * encoding into UTF-8. */ + Tcl_EncodingConvertProc *fromUtfProc; + /* Procedure to convert from UTF-8 into + * external encoding. */ + Tcl_EncodingFreeProc *freeProc; + /* If non-NULL, procedure to call when this + * encoding is deleted. */ + ClientData clientData; /* Arbitrary value associated with encoding + * type. Passed to conversion procedures. */ + int nullSize; /* Number of zero bytes that signify + * end-of-string in this encoding. This + * number is used to determine the source + * string length when the srcLen argument is + * negative. Must be 1 or 2. */ +} Tcl_EncodingType; + +/* + * The following definitions are used as values for the conversion control + * flags argument when converting text from one character set to another: + * + * TCL_ENCODING_START: Signifies that the source buffer is the first + * block in a (potentially multi-block) input + * stream. Tells the conversion procedure to + * reset to an initial state and perform any + * initialization that needs to occur before the + * first byte is converted. If the source + * buffer contains the entire input stream to be + * converted, this flag should be set. + * + * TCL_ENCODING_END: Signifies that the source buffer is the last + * block in a (potentially multi-block) input + * stream. Tells the conversion routine to + * perform any finalization that needs to occur + * after the last byte is converted and then to + * reset to an initial state. If the source + * buffer contains the entire input stream to be + * converted, this flag should be set. + * + * TCL_ENCODING_STOPONERROR: If set, then the converter will return + * immediately upon encountering an invalid + * byte sequence or a source character that has + * no mapping in the target encoding. If clear, + * then the converter will skip the problem, + * substituting one or more "close" characters + * in the destination buffer and then continue + * to sonvert the source. + */ + +#define TCL_ENCODING_START 0x01 +#define TCL_ENCODING_END 0x02 +#define TCL_ENCODING_STOPONERROR 0x04 + +/* + *---------------------------------------------------------------- + * The following data structures and declarations are for the new + * Tcl parser. This stuff should all move to tcl.h eventually. + *---------------------------------------------------------------- + */ + +/* + * For each word of a command, and for each piece of a word such as a + * variable reference, one of the following structures is created to + * describe the token. + */ + +typedef struct Tcl_Token { + int type; /* Type of token, such as TCL_TOKEN_WORD; + * see below for valid types. */ + char *start; /* First character in token. */ + int size; /* Number of bytes in token. */ + int numComponents; /* If this token is composed of other + * tokens, this field tells how many of + * them there are (including components of + * components, etc.). The component tokens + * immediately follow this one. */ +} Tcl_Token; + +/* + * Type values defined for Tcl_Token structures. These values are + * defined as mask bits so that it's easy to check for collections of + * types. + * + * TCL_TOKEN_WORD - The token describes one word of a command, + * from the first non-blank character of + * the word (which may be " or {) up to but + * not including the space, semicolon, or + * bracket that terminates the word. + * NumComponents counts the total number of + * sub-tokens that make up the word. This + * includes, for example, sub-tokens of + * TCL_TOKEN_VARIABLE tokens. + * TCL_TOKEN_SIMPLE_WORD - This token is just like TCL_TOKEN_WORD + * except that the word is guaranteed to + * consist of a single TCL_TOKEN_TEXT + * sub-token. + * TCL_TOKEN_TEXT - The token describes a range of literal + * text that is part of a word. + * NumComponents is always 0. + * TCL_TOKEN_BS - The token describes a backslash sequence + * that must be collapsed. NumComponents + * is always 0. + * TCL_TOKEN_COMMAND - The token describes a command whose result + * must be substituted into the word. The + * token includes the enclosing brackets. + * NumComponents is always 0. + * TCL_TOKEN_VARIABLE - The token describes a variable + * substitution, including the dollar sign, + * variable name, and array index (if there + * is one) up through the right + * parentheses. NumComponents tells how + * many additional tokens follow to + * represent the variable name. The first + * token will be a TCL_TOKEN_TEXT token + * that describes the variable name. If + * the variable is an array reference then + * there will be one or more additional + * tokens, of type TCL_TOKEN_TEXT, + * TCL_TOKEN_BS, TCL_TOKEN_COMMAND, and + * TCL_TOKEN_VARIABLE, that describe the + * array index; numComponents counts the + * total number of nested tokens that make + * up the variable reference, including + * sub-tokens of TCL_TOKEN_VARIABLE tokens. + * TCL_TOKEN_SUB_EXPR - The token describes one subexpression of a + * expression, from the first non-blank + * character of the subexpression up to but not + * including the space, brace, or bracket + * that terminates the subexpression. + * NumComponents counts the total number of + * following subtokens that make up the + * subexpression; this includes all subtokens + * for any nested TCL_TOKEN_SUB_EXPR tokens. + * For example, a numeric value used as a + * primitive operand is described by a + * TCL_TOKEN_SUB_EXPR token followed by a + * TCL_TOKEN_TEXT token. A binary subexpression + * is described by a TCL_TOKEN_SUB_EXPR token + * followed by the TCL_TOKEN_OPERATOR token + * for the operator, then TCL_TOKEN_SUB_EXPR + * tokens for the left then the right operands. + * TCL_TOKEN_OPERATOR - The token describes one expression operator. + * An operator might be the name of a math + * function such as "abs". A TCL_TOKEN_OPERATOR + * token is always preceeded by one + * TCL_TOKEN_SUB_EXPR token for the operator's + * subexpression, and is followed by zero or + * more TCL_TOKEN_SUB_EXPR tokens for the + * operator's operands. NumComponents is + * always 0. + */ + +#define TCL_TOKEN_WORD 1 +#define TCL_TOKEN_SIMPLE_WORD 2 +#define TCL_TOKEN_TEXT 4 +#define TCL_TOKEN_BS 8 +#define TCL_TOKEN_COMMAND 16 +#define TCL_TOKEN_VARIABLE 32 +#define TCL_TOKEN_SUB_EXPR 64 +#define TCL_TOKEN_OPERATOR 128 + +/* + * Parsing error types. On any parsing error, one of these values + * will be stored in the error field of the Tcl_Parse structure + * defined below. + */ + +#define TCL_PARSE_SUCCESS 0 +#define TCL_PARSE_QUOTE_EXTRA 1 +#define TCL_PARSE_BRACE_EXTRA 2 +#define TCL_PARSE_MISSING_BRACE 3 +#define TCL_PARSE_MISSING_BRACKET 4 +#define TCL_PARSE_MISSING_PAREN 5 +#define TCL_PARSE_MISSING_QUOTE 6 +#define TCL_PARSE_MISSING_VAR_BRACE 7 +#define TCL_PARSE_SYNTAX 8 +#define TCL_PARSE_BAD_NUMBER 9 + +/* + * A structure of the following type is filled in by Tcl_ParseCommand. + * It describes a single command parsed from an input string. + */ + +#define NUM_STATIC_TOKENS 20 + +typedef struct Tcl_Parse { + char *commentStart; /* Pointer to # that begins the first of + * one or more comments preceding the + * command. */ + int commentSize; /* Number of bytes in comments (up through + * newline character that terminates the + * last comment). If there were no + * comments, this field is 0. */ + char *commandStart; /* First character in first word of command. */ + int commandSize; /* Number of bytes in command, including + * first character of first word, up + * through the terminating newline, + * close bracket, or semicolon. */ + int numWords; /* Total number of words in command. May + * be 0. */ + Tcl_Token *tokenPtr; /* Pointer to first token representing + * the words of the command. Initially + * points to staticTokens, but may change + * to point to malloc-ed space if command + * exceeds space in staticTokens. */ + int numTokens; /* Total number of tokens in command. */ + int tokensAvailable; /* Total number of tokens available at + * *tokenPtr. */ + int errorType; /* One of the parsing error types defined + * above. */ + + /* + * The fields below are intended only for the private use of the + * parser. They should not be used by procedures that invoke + * Tcl_ParseCommand. + */ + + char *string; /* The original command string passed to + * Tcl_ParseCommand. */ + char *end; /* Points to the character just after the + * last one in the command string. */ + Tcl_Interp *interp; /* Interpreter to use for error reporting, + * or NULL. */ + char *term; /* Points to character in string that + * terminated most recent token. Filled in + * by ParseTokens. If an error occurs, + * points to beginning of region where the + * error occurred (e.g. the open brace if + * the close brace is missing). */ + int incomplete; /* This field is set to 1 by Tcl_ParseCommand + * if the command appears to be incomplete. + * This information is used by + * Tcl_CommandComplete. */ + Tcl_Token staticTokens[NUM_STATIC_TOKENS]; + /* Initial space for tokens for command. + * This space should be large enough to + * accommodate most commands; dynamic + * space is allocated for very large + * commands that don't fit here. */ +} Tcl_Parse; + +/* + * The following definitions are the error codes returned by the conversion + * routines: + * + * TCL_OK: All characters were converted. + * + * TCL_CONVERT_NOSPACE: The output buffer would not have been large + * enough for all of the converted data; as many + * characters as could fit were converted though. + * + * TCL_CONVERT_MULTIBYTE: The last few bytes in the source string were + * the beginning of a multibyte sequence, but + * more bytes were needed to complete this + * sequence. A subsequent call to the conversion + * routine should pass the beginning of this + * unconverted sequence plus additional bytes + * from the source stream to properly convert + * the formerly split-up multibyte sequence. + * + * TCL_CONVERT_SYNTAX: The source stream contained an invalid + * character sequence. This may occur if the + * input stream has been damaged or if the input + * encoding method was misidentified. This error + * is reported only if TCL_ENCODING_STOPONERROR + * was specified. + * + * TCL_CONVERT_UNKNOWN: The source string contained a character + * that could not be represented in the target + * encoding. This error is reported only if + * TCL_ENCODING_STOPONERROR was specified. + */ + +#define TCL_CONVERT_MULTIBYTE -1 +#define TCL_CONVERT_SYNTAX -2 +#define TCL_CONVERT_UNKNOWN -3 +#define TCL_CONVERT_NOSPACE -4 + +/* + * The maximum number of bytes that are necessary to represent a single + * Unicode character in UTF-8. + */ + +#define TCL_UTF_MAX 3 + +/* + * This represents a Unicode character. + */ + +typedef unsigned short Tcl_UniChar; + +/* + * Deprecated Tcl procedures: + */ + +#ifndef TCL_NO_DEPRECATED +#define Tcl_EvalObj(interp,objPtr) Tcl_EvalObjEx((interp),(objPtr),0) +#define Tcl_GlobalEvalObj(interp,objPtr) \ + Tcl_EvalObjEx((interp),(objPtr),TCL_EVAL_GLOBAL) +#endif + +/* + * These function have been renamed. The old names are deprecated, but we + * define these macros for backwards compatibilty. + */ + +#define Tcl_Ckalloc Tcl_Alloc +#define Tcl_Ckfree Tcl_Free +#define Tcl_Ckrealloc Tcl_Realloc +#define Tcl_Return Tcl_SetResult +#define Tcl_TildeSubst Tcl_TranslateFileName +#define panic Tcl_Panic +#define panicVA Tcl_PanicVA + +/* + * The following constant is used to test for older versions of Tcl + * in the stubs tables. + * + * Jan Nijtman's plus patch uses 0xFCA1BACF, so we need to pick a different + * value since the stubs tables don't match. + */ + +#define TCL_STUB_MAGIC 0xFCA3BACF + +/* + * The following function is required to be defined in all stubs aware + * extensions. The function is actually implemented in the stub + * library, not the main Tcl library, although there is a trivial + * implementation in the main library in case an extension is statically + * linked into an application. + */ + +EXTERN char * Tcl_InitStubs _ANSI_ARGS_((Tcl_Interp *interp, + char *version, int exact)); + +#ifndef USE_TCL_STUBS + +/* + * When not using stubs, make it a macro. + */ + +#define Tcl_InitStubs(interp, version, exact) \ + Tcl_PkgRequire(interp, "Tcl", version, exact) + +#endif + + +/* + * Include the public function declarations that are accessible via + * the stubs table. + */ + +#include "tclDecls.h" + +/* + * Public functions that are not accessible via the stubs table. + */ + +EXTERN void Tcl_Main _ANSI_ARGS_((int argc, char **argv, + Tcl_AppInitProc *appInitProc)); + +/* + * Convenience declaration of Tcl_AppInit for backwards compatibility. + * This function is not *implemented* by the tcl library, so the storage + * class is neither DLLEXPORT nor DLLIMPORT + */ + +#undef TCL_STORAGE_CLASS +#define TCL_STORAGE_CLASS + +EXTERN int Tcl_AppInit _ANSI_ARGS_((Tcl_Interp *interp)); + +#endif /* RESOURCE_INCLUDED */ + +#undef TCL_STORAGE_CLASS +#define TCL_STORAGE_CLASS DLLIMPORT + +/* + * end block for C++ + */ + +#ifdef __cplusplus +} +#endif + +#endif /* _TCL */ + +/* End of tcl.h */