shared_source/c_tk_base_7_5_w_mods/tkcanvarc.c

/* $Header$ */

/* 
 * tkCanvArc.c --
 *
 *      This file implements arc items for canvas widgets.
 *
 * Copyright (c) 1992-1994 The Regents of the University of California.
 * Copyright (c) 1994-1997 Sun Microsystems, Inc.
 *
 * See the file "license.terms" for information on usage and redistribution
 * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 *
 * RCS: @(#) $Id: tkcanvarc.c,v 1.1.1.1 2001/06/13 04:55:11 dtashley Exp $
 */

#include <stdio.h>
#include "tkPort.h"
#include "tkInt.h"
#include "tkCanvas.h"
/*
 * The structure below defines the record for each arc item.
 */

typedef enum {
    PIESLICE_STYLE, CHORD_STYLE, ARC_STYLE
} Style;

typedef struct ArcItem  {
    Tk_Item header;             /* Generic stuff that's the same for all
                                 * types.  MUST BE FIRST IN STRUCTURE. */
    Tk_Outline outline;         /* Outline structure */
    double bbox[4];             /* Coordinates (x1, y1, x2, y2) of bounding
                                 * box for oval of which arc is a piece. */
    double start;               /* Angle at which arc begins, in degrees
                                 * between 0 and 360. */
    double extent;              /* Extent of arc (angular distance from
                                 * start to end of arc) in degrees between
                                 * -360 and 360. */
    double *outlinePtr;         /* Points to (x,y) coordinates for points
                                 * that define one or two closed polygons
                                 * representing the portion of the outline
                                 * that isn't part of the arc (the V-shape
                                 * for a pie slice or a line-like segment
                                 * for a chord).  Malloc'ed. */
    int numOutlinePoints;       /* Number of points at outlinePtr.  Zero
                                 * means no space allocated. */
    Tk_TSOffset tsoffset;
    XColor *fillColor;          /* Color for filling arc (used for drawing
                                 * outline too when style is "arc").  NULL
                                 * means don't fill arc. */
    XColor *activeFillColor;    /* Color for filling arc (used for drawing
                                 * outline too when style is "arc" and state
                                 * is "active").  NULL means use fillColor. */
    XColor *disabledFillColor;  /* Color for filling arc (used for drawing
                                 * outline too when style is "arc" and state
                                 * is "disabled". NULL means use fillColor */
    Pixmap fillStipple;         /* Stipple bitmap for filling item. */
    Pixmap activeFillStipple;   /* Stipple bitmap for filling item if state
                                 * is active. */
    Pixmap disabledFillStipple; /* Stipple bitmap for filling item if state
                                 * is disabled. */
    Style style;                /* How to draw arc: arc, chord, or pieslice. */
    GC fillGC;                  /* Graphics context for filling item. */
    double center1[2];          /* Coordinates of center of arc outline at
                                 * start (see ComputeArcOutline). */
    double center2[2];          /* Coordinates of center of arc outline at
                                 * start+extent (see ComputeArcOutline). */
} ArcItem;

/*
 * The definitions below define the sizes of the polygons used to
 * display outline information for various styles of arcs:
 */

#define CHORD_OUTLINE_PTS       7
#define PIE_OUTLINE1_PTS        6
#define PIE_OUTLINE2_PTS        7

/*
 * Information used for parsing configuration specs:
 */

static int      StyleParseProc _ANSI_ARGS_((
                    ClientData clientData, Tcl_Interp *interp,
                    Tk_Window tkwin, CONST char *value,
                    char *widgRec, int offset));
static char *   StylePrintProc _ANSI_ARGS_((
                    ClientData clientData, Tk_Window tkwin,
                    char *widgRec, int offset,
                    Tcl_FreeProc **freeProcPtr));

static Tk_CustomOption stateOption = {
    (Tk_OptionParseProc *) TkStateParseProc,
    TkStatePrintProc, (ClientData) 2
};
static Tk_CustomOption styleOption = {
    (Tk_OptionParseProc *) StyleParseProc,
    StylePrintProc, (ClientData) NULL
};
static Tk_CustomOption tagsOption = {
    (Tk_OptionParseProc *) Tk_CanvasTagsParseProc,
    Tk_CanvasTagsPrintProc, (ClientData) NULL
};
static Tk_CustomOption dashOption = {
    (Tk_OptionParseProc *) TkCanvasDashParseProc,
    TkCanvasDashPrintProc, (ClientData) NULL
};
static Tk_CustomOption offsetOption = {
    (Tk_OptionParseProc *) TkOffsetParseProc,
    TkOffsetPrintProc, (ClientData) (TK_OFFSET_RELATIVE)
};
static Tk_CustomOption pixelOption = {
    (Tk_OptionParseProc *) TkPixelParseProc,
    TkPixelPrintProc, (ClientData) NULL
};

static Tk_ConfigSpec configSpecs[] = {
    {TK_CONFIG_CUSTOM, "-activedash", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.activeDash),
        TK_CONFIG_NULL_OK, &dashOption},
    {TK_CONFIG_COLOR, "-activefill", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, activeFillColor),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_COLOR, "-activeoutline", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.activeColor),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_BITMAP, "-activeoutlinestipple", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.activeStipple),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_BITMAP, "-activestipple", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, activeFillStipple),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_CUSTOM, "-activewidth", (char *) NULL, (char *) NULL,
        "0.0", Tk_Offset(ArcItem, outline.activeWidth),
        TK_CONFIG_DONT_SET_DEFAULT, &pixelOption},
    {TK_CONFIG_CUSTOM, "-dash", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.dash),
        TK_CONFIG_NULL_OK, &dashOption},
    {TK_CONFIG_PIXELS, "-dashoffset", (char *) NULL, (char *) NULL,
        "0", Tk_Offset(ArcItem, outline.offset), TK_CONFIG_DONT_SET_DEFAULT},
    {TK_CONFIG_CUSTOM, "-disableddash", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.disabledDash),
        TK_CONFIG_NULL_OK, &dashOption},
    {TK_CONFIG_COLOR, "-disabledfill", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, disabledFillColor),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_COLOR, "-disabledoutline", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.disabledColor),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_BITMAP, "-disabledoutlinestipple", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.disabledStipple),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_BITMAP, "-disabledstipple", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, disabledFillStipple),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_CUSTOM, "-disabledwidth", (char *) NULL, (char *) NULL,
        "0.0", Tk_Offset(ArcItem, outline.disabledWidth),
        TK_CONFIG_DONT_SET_DEFAULT, &pixelOption},
    {TK_CONFIG_DOUBLE, "-extent", (char *) NULL, (char *) NULL,
        "90", Tk_Offset(ArcItem, extent), TK_CONFIG_DONT_SET_DEFAULT},
    {TK_CONFIG_COLOR, "-fill", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, fillColor), TK_CONFIG_NULL_OK},
    {TK_CONFIG_CUSTOM, "-offset", (char *) NULL, (char *) NULL,
        "0,0", Tk_Offset(ArcItem, tsoffset),
        TK_CONFIG_DONT_SET_DEFAULT, &offsetOption},
    {TK_CONFIG_COLOR, "-outline", (char *) NULL, (char *) NULL,
        "black", Tk_Offset(ArcItem, outline.color), TK_CONFIG_NULL_OK},
    {TK_CONFIG_CUSTOM, "-outlineoffset", (char *) NULL, (char *) NULL,
        "0,0", Tk_Offset(ArcItem, outline.tsoffset),
        TK_CONFIG_DONT_SET_DEFAULT, &offsetOption},
    {TK_CONFIG_BITMAP, "-outlinestipple", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, outline.stipple),
        TK_CONFIG_NULL_OK},
    {TK_CONFIG_DOUBLE, "-start", (char *) NULL, (char *) NULL,
        "0", Tk_Offset(ArcItem, start), TK_CONFIG_DONT_SET_DEFAULT},
    {TK_CONFIG_CUSTOM, "-state", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(Tk_Item, state), TK_CONFIG_NULL_OK,
        &stateOption},
    {TK_CONFIG_BITMAP, "-stipple", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, fillStipple), TK_CONFIG_NULL_OK},
    {TK_CONFIG_CUSTOM, "-style", (char *) NULL, (char *) NULL,
        (char *) NULL, Tk_Offset(ArcItem, style), TK_CONFIG_DONT_SET_DEFAULT,
        &styleOption},
    {TK_CONFIG_CUSTOM, "-tags", (char *) NULL, (char *) NULL,
        (char *) NULL, 0, TK_CONFIG_NULL_OK, &tagsOption},
    {TK_CONFIG_CUSTOM, "-width", (char *) NULL, (char *) NULL,
        "1.0", Tk_Offset(ArcItem, outline.width), TK_CONFIG_DONT_SET_DEFAULT,
        &pixelOption},
    {TK_CONFIG_END, (char *) NULL, (char *) NULL, (char *) NULL,
        (char *) NULL, 0, 0}
};

/*
 * Prototypes for procedures defined in this file:
 */

static void             ComputeArcBbox _ANSI_ARGS_((Tk_Canvas canvas,
                            ArcItem *arcPtr));
static int              ConfigureArc _ANSI_ARGS_((Tcl_Interp *interp,
                            Tk_Canvas canvas, Tk_Item *itemPtr, int argc,
                            Tcl_Obj *CONST argv[], int flags));
static int              CreateArc _ANSI_ARGS_((Tcl_Interp *interp,
                            Tk_Canvas canvas, struct Tk_Item *itemPtr,
                            int argc, Tcl_Obj *CONST argv[]));
static void             DeleteArc _ANSI_ARGS_((Tk_Canvas canvas,
                            Tk_Item *itemPtr, Display *display));
static void             DisplayArc _ANSI_ARGS_((Tk_Canvas canvas,
                            Tk_Item *itemPtr, Display *display, Drawable dst,
                            int x, int y, int width, int height));
static int              ArcCoords _ANSI_ARGS_((Tcl_Interp *interp,
                            Tk_Canvas canvas, Tk_Item *itemPtr, int argc,
                            Tcl_Obj *CONST argv[]));
static int              ArcToArea _ANSI_ARGS_((Tk_Canvas canvas,
                            Tk_Item *itemPtr, double *rectPtr));
static double           ArcToPoint _ANSI_ARGS_((Tk_Canvas canvas,
                            Tk_Item *itemPtr, double *coordPtr));
static int              ArcToPostscript _ANSI_ARGS_((Tcl_Interp *interp,
                            Tk_Canvas canvas, Tk_Item *itemPtr, int prepass));
static void             ScaleArc _ANSI_ARGS_((Tk_Canvas canvas,
                            Tk_Item *itemPtr, double originX, double originY,
                            double scaleX, double scaleY));
static void             TranslateArc _ANSI_ARGS_((Tk_Canvas canvas,
                            Tk_Item *itemPtr, double deltaX, double deltaY));
static int              AngleInRange _ANSI_ARGS_((double x, double y,
                            double start, double extent));
static void             ComputeArcOutline _ANSI_ARGS_((Tk_Canvas canvas,
                            ArcItem *arcPtr));
static int              HorizLineToArc _ANSI_ARGS_((double x1, double x2,
                            double y, double rx, double ry,
                            double start, double extent));
static int              VertLineToArc _ANSI_ARGS_((double x, double y1,
                            double y2, double rx, double ry,
                            double start, double extent));

/*
 * The structures below defines the arc item types by means of procedures
 * that can be invoked by generic item code.
 */

Tk_ItemType tkArcType = {
    "arc",                              /* name */
    sizeof(ArcItem),                    /* itemSize */
    CreateArc,                          /* createProc */
    configSpecs,                        /* configSpecs */
    ConfigureArc,                       /* configureProc */
    ArcCoords,                          /* coordProc */
    DeleteArc,                          /* deleteProc */
    DisplayArc,                         /* displayProc */
    TK_CONFIG_OBJS,                     /* flags */
    ArcToPoint,                         /* pointProc */
    ArcToArea,                          /* areaProc */
    ArcToPostscript,                    /* postscriptProc */
    ScaleArc,                           /* scaleProc */
    TranslateArc,                       /* translateProc */
    (Tk_ItemIndexProc *) NULL,          /* indexProc */
    (Tk_ItemCursorProc *) NULL,         /* icursorProc */
    (Tk_ItemSelectionProc *) NULL,      /* selectionProc */
    (Tk_ItemInsertProc *) NULL,         /* insertProc */
    (Tk_ItemDCharsProc *) NULL,         /* dTextProc */
    (Tk_ItemType *) NULL,               /* nextPtr */
};

#ifndef PI
#    define PI 3.14159265358979323846
#endif


/*
 *--------------------------------------------------------------
 *
 * CreateArc --
 *
 *      This procedure is invoked to create a new arc item in
 *      a canvas.
 *
 * Results:
 *      A standard Tcl return value.  If an error occurred in
 *      creating the item, then an error message is left in
 *      the interp's result;  in this case itemPtr is
 *      left uninitialized, so it can be safely freed by the
 *      caller.
 *
 * Side effects:
 *      A new arc item is created.
 *
 *--------------------------------------------------------------
 */

static int
CreateArc(interp, canvas, itemPtr, argc, argv)
    Tcl_Interp *interp;                 /* Interpreter for error reporting. */
    Tk_Canvas canvas;                   /* Canvas to hold new item. */
    Tk_Item *itemPtr;                   /* Record to hold new item;  header
                                         * has been initialized by caller. */
    int argc;                           /* Number of arguments in argv. */
    Tcl_Obj *CONST argv[];              /* Arguments describing arc. */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;
    int i;

    if (argc==1) {
        i = 1;
    } else {
        char *arg = Tcl_GetStringFromObj(argv[1], NULL);
        if ((argc>1) && (arg[0] == '-')
                && (arg[1] >= 'a') && (arg[1] <= 'z')) {
            i = 1;
        } else {
            i = 4;
        }
    }
    if (argc < i) {
        Tcl_AppendResult(interp, "wrong # args: should be \"",
                Tk_PathName(Tk_CanvasTkwin(canvas)), " create ",
                itemPtr->typePtr->name, " x1 y1 x2 y2 ?options?\"",
                (char *) NULL);
        return TCL_ERROR;
    }

    /*
     * Carry out initialization that is needed in order to clean
     * up after errors during the the remainder of this procedure.
     */

    Tk_CreateOutline(&(arcPtr->outline));
    arcPtr->start = 0;
    arcPtr->extent = 90;
    arcPtr->outlinePtr = NULL;
    arcPtr->numOutlinePoints = 0;
    arcPtr->tsoffset.flags = 0;
    arcPtr->tsoffset.xoffset = 0;
    arcPtr->tsoffset.yoffset = 0;
    arcPtr->fillColor = NULL;
    arcPtr->activeFillColor = NULL;
    arcPtr->disabledFillColor = NULL;
    arcPtr->fillStipple = None;
    arcPtr->activeFillStipple = None;
    arcPtr->disabledFillStipple = None;
    arcPtr->style = PIESLICE_STYLE;
    arcPtr->fillGC = None;

    /*
     * Process the arguments to fill in the item record.
     */

    if ((ArcCoords(interp, canvas, itemPtr, i, argv) != TCL_OK)) {
        goto error;
    }
    if (ConfigureArc(interp, canvas, itemPtr, argc-4, argv+4, 0) == TCL_OK) {
        return TCL_OK;
    }
    error:
    DeleteArc(canvas, itemPtr, Tk_Display(Tk_CanvasTkwin(canvas)));
    return TCL_ERROR;
}

/*
 *--------------------------------------------------------------
 *
 * ArcCoords --
 *
 *      This procedure is invoked to process the "coords" widget
 *      command on arcs.  See the user documentation for details
 *      on what it does.
 *
 * Results:
 *      Returns TCL_OK or TCL_ERROR, and sets the interp's result.
 *
 * Side effects:
 *      The coordinates for the given item may be changed.
 *
 *--------------------------------------------------------------
 */

static int
ArcCoords(interp, canvas, itemPtr, argc, argv)
    Tcl_Interp *interp;                 /* Used for error reporting. */
    Tk_Canvas canvas;                   /* Canvas containing item. */
    Tk_Item *itemPtr;                   /* Item whose coordinates are to be
                                         * read or modified. */
    int argc;                           /* Number of coordinates supplied in
                                         * argv. */
    Tcl_Obj *CONST argv[];              /* Array of coordinates: x1, y1,
                                         * x2, y2, ... */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;

    if (argc == 0) {
        Tcl_Obj *obj = Tcl_NewObj();
        Tcl_Obj *subobj = Tcl_NewDoubleObj(arcPtr->bbox[0]);
        Tcl_ListObjAppendElement(interp, obj, subobj);
        subobj = Tcl_NewDoubleObj(arcPtr->bbox[1]);
        Tcl_ListObjAppendElement(interp, obj, subobj);
        subobj = Tcl_NewDoubleObj(arcPtr->bbox[2]);
        Tcl_ListObjAppendElement(interp, obj, subobj);
        subobj = Tcl_NewDoubleObj(arcPtr->bbox[3]);
        Tcl_ListObjAppendElement(interp, obj, subobj);
        Tcl_SetObjResult(interp, obj);
    } else if ((argc == 1)||(argc == 4)) {
        if (argc==1) {
            if (Tcl_ListObjGetElements(interp, argv[0], &argc,
                    (Tcl_Obj ***) &argv) != TCL_OK) {
                return TCL_ERROR;
            } else if (argc != 4) {
                char buf[64 + TCL_INTEGER_SPACE];
        
                sprintf(buf, "wrong # coordinates: expected 4, got %d", argc);
                Tcl_SetResult(interp, buf, TCL_VOLATILE);
                return TCL_ERROR;
            }
        }
        if ((Tk_CanvasGetCoordFromObj(interp, canvas, argv[0],
                    &arcPtr->bbox[0]) != TCL_OK)
                || (Tk_CanvasGetCoordFromObj(interp, canvas, argv[1],
                    &arcPtr->bbox[1]) != TCL_OK)
                || (Tk_CanvasGetCoordFromObj(interp, canvas, argv[2],
                        &arcPtr->bbox[2]) != TCL_OK)
                || (Tk_CanvasGetCoordFromObj(interp, canvas, argv[3],
                        &arcPtr->bbox[3]) != TCL_OK)) {
            return TCL_ERROR;
        }
        ComputeArcBbox(canvas, arcPtr);
    } else {
        char buf[64 + TCL_INTEGER_SPACE];
        
        sprintf(buf, "wrong # coordinates: expected 0 or 4, got %d", argc);
        Tcl_SetResult(interp, buf, TCL_VOLATILE);
        return TCL_ERROR;
    }
    return TCL_OK;
}

/*
 *--------------------------------------------------------------
 *
 * ConfigureArc --
 *
 *      This procedure is invoked to configure various aspects
 *      of a arc item, such as its outline and fill colors.
 *
 * Results:
 *      A standard Tcl result code.  If an error occurs, then
 *      an error message is left in the interp's result.
 *
 * Side effects:
 *      Configuration information, such as colors and stipple
 *      patterns, may be set for itemPtr.
 *
 *--------------------------------------------------------------
 */

static int
ConfigureArc(interp, canvas, itemPtr, argc, argv, flags)
    Tcl_Interp *interp;         /* Used for error reporting. */
    Tk_Canvas canvas;           /* Canvas containing itemPtr. */
    Tk_Item *itemPtr;           /* Arc item to reconfigure. */
    int argc;                   /* Number of elements in argv.  */
    Tcl_Obj *CONST argv[];      /* Arguments describing things to configure. */
    int flags;                  /* Flags to pass to Tk_ConfigureWidget. */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;
    XGCValues gcValues;
    GC newGC;
    unsigned long mask;
    int i;
    Tk_Window tkwin;
    Tk_TSOffset *tsoffset;
    XColor *color;
    Pixmap stipple;
    Tk_State state;

    tkwin = Tk_CanvasTkwin(canvas);
    if (Tk_ConfigureWidget(interp, tkwin, configSpecs, argc, (char **) argv,
            (char *) arcPtr, flags|TK_CONFIG_OBJS) != TCL_OK) {
        return TCL_ERROR;
    }

    state = itemPtr->state;

    /*
     * A few of the options require additional processing, such as
     * style and graphics contexts.
     */

    if (arcPtr->outline.activeWidth > arcPtr->outline.width ||
            arcPtr->outline.activeDash.number != 0 ||
            arcPtr->outline.activeColor != NULL ||
            arcPtr->outline.activeStipple != None ||
            arcPtr->activeFillColor != NULL ||
            arcPtr->activeFillStipple != None) {
        itemPtr->redraw_flags |= TK_ITEM_STATE_DEPENDANT;
    } else {
        itemPtr->redraw_flags &= ~TK_ITEM_STATE_DEPENDANT;
    }

    tsoffset = &arcPtr->outline.tsoffset;
    flags = tsoffset->flags;
    if (flags & TK_OFFSET_LEFT) {
        tsoffset->xoffset = (int) (arcPtr->bbox[0] + 0.5);
    } else if (flags & TK_OFFSET_CENTER) {
        tsoffset->xoffset = (int) ((arcPtr->bbox[0]+arcPtr->bbox[2]+1)/2);
    } else if (flags & TK_OFFSET_RIGHT) {
        tsoffset->xoffset = (int) (arcPtr->bbox[2] + 0.5);
    }
    if (flags & TK_OFFSET_TOP) {
        tsoffset->yoffset = (int) (arcPtr->bbox[1] + 0.5);
    } else if (flags & TK_OFFSET_MIDDLE) {
        tsoffset->yoffset = (int) ((arcPtr->bbox[1]+arcPtr->bbox[3]+1)/2);
    } else if (flags & TK_OFFSET_BOTTOM) {
        tsoffset->yoffset = (int) (arcPtr->bbox[2] + 0.5);
    }

    i = (int) (arcPtr->start/360.0);
    arcPtr->start -= i*360.0;
    if (arcPtr->start < 0) {
        arcPtr->start += 360.0;
    }
    i = (int) (arcPtr->extent/360.0);
    arcPtr->extent -= i*360.0;

    mask = Tk_ConfigOutlineGC(&gcValues, canvas, itemPtr,
            &(arcPtr->outline));
    if (mask) {
        gcValues.cap_style = CapButt;
        mask |= GCCapStyle;
        newGC = Tk_GetGC(tkwin, mask, &gcValues);
    } else {
        newGC = None;
    }
    if (arcPtr->outline.gc != None) {
        Tk_FreeGC(Tk_Display(tkwin), arcPtr->outline.gc);
    }
    arcPtr->outline.gc = newGC;

    if(state == TK_STATE_NULL) {
        state = ((TkCanvas *)canvas)->canvas_state;
    }
    if (state==TK_STATE_HIDDEN) {
        ComputeArcBbox(canvas, arcPtr);
        return TCL_OK;
    }

    color = arcPtr->fillColor;
    stipple = arcPtr->fillStipple;
    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
        if (arcPtr->activeFillColor!=NULL) {
            color = arcPtr->activeFillColor;
        }
        if (arcPtr->activeFillStipple!=None) {
            stipple = arcPtr->activeFillStipple;
        }
    } else if (state==TK_STATE_DISABLED) {
        if (arcPtr->disabledFillColor!=NULL) {
            color = arcPtr->disabledFillColor;
        }
        if (arcPtr->disabledFillStipple!=None) {
            stipple = arcPtr->disabledFillStipple;
        }
      }

    if (arcPtr->style == ARC_STYLE) {
        newGC = None;
    } else if (color == NULL) {
        newGC = None;
    } else {
        gcValues.foreground = color->pixel;
        if (arcPtr->style == CHORD_STYLE) {
            gcValues.arc_mode = ArcChord;
        } else {
            gcValues.arc_mode = ArcPieSlice;
        }
        mask = GCForeground|GCArcMode;
        if (stipple != None) {
            gcValues.stipple = stipple;
            gcValues.fill_style = FillStippled;
            mask |= GCStipple|GCFillStyle;
        }
        newGC = Tk_GetGC(tkwin, mask, &gcValues);
    }
    if (arcPtr->fillGC != None) {
        Tk_FreeGC(Tk_Display(tkwin), arcPtr->fillGC);
    }
    arcPtr->fillGC = newGC;

    tsoffset = &arcPtr->tsoffset;
    flags = tsoffset->flags;
    if (flags & TK_OFFSET_LEFT) {
        tsoffset->xoffset = (int) (arcPtr->bbox[0] + 0.5);
    } else if (flags & TK_OFFSET_CENTER) {
        tsoffset->xoffset = (int) ((arcPtr->bbox[0]+arcPtr->bbox[2]+1)/2);
    } else if (flags & TK_OFFSET_RIGHT) {
        tsoffset->xoffset = (int) (arcPtr->bbox[2] + 0.5);
    }
    if (flags & TK_OFFSET_TOP) {
        tsoffset->yoffset = (int) (arcPtr->bbox[1] + 0.5);
    } else if (flags & TK_OFFSET_MIDDLE) {
        tsoffset->yoffset = (int) ((arcPtr->bbox[1]+arcPtr->bbox[3]+1)/2);
    } else if (flags & TK_OFFSET_BOTTOM) {
        tsoffset->yoffset = (int) (arcPtr->bbox[3] + 0.5);
    }

    ComputeArcBbox(canvas, arcPtr);
    return TCL_OK;
}

/*
 *--------------------------------------------------------------
 *
 * DeleteArc --
 *
 *      This procedure is called to clean up the data structure
 *      associated with a arc item.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      Resources associated with itemPtr are released.
 *
 *--------------------------------------------------------------
 */

static void
DeleteArc(canvas, itemPtr, display)
    Tk_Canvas canvas;                   /* Info about overall canvas. */
    Tk_Item *itemPtr;                   /* Item that is being deleted. */
    Display *display;                   /* Display containing window for
                                         * canvas. */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;

    Tk_DeleteOutline(display, &(arcPtr->outline));
    if (arcPtr->numOutlinePoints != 0) {
        ckfree((char *) arcPtr->outlinePtr);
    }
    if (arcPtr->fillColor != NULL) {
        Tk_FreeColor(arcPtr->fillColor);
    }
    if (arcPtr->activeFillColor != NULL) {
        Tk_FreeColor(arcPtr->activeFillColor);
    }
    if (arcPtr->disabledFillColor != NULL) {
        Tk_FreeColor(arcPtr->disabledFillColor);
    }
    if (arcPtr->fillStipple != None) {
        Tk_FreeBitmap(display, arcPtr->fillStipple);
    }
    if (arcPtr->activeFillStipple != None) {
        Tk_FreeBitmap(display, arcPtr->activeFillStipple);
    }
    if (arcPtr->disabledFillStipple != None) {
        Tk_FreeBitmap(display, arcPtr->disabledFillStipple);
    }
    if (arcPtr->fillGC != None) {
        Tk_FreeGC(display, arcPtr->fillGC);
    }
}

/*
 *--------------------------------------------------------------
 *
 * ComputeArcBbox --
 *
 *      This procedure is invoked to compute the bounding box of
 *      all the pixels that may be drawn as part of an arc.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      The fields x1, y1, x2, and y2 are updated in the header
 *      for itemPtr.
 *
 *--------------------------------------------------------------
 */

        /* ARGSUSED */
static void
ComputeArcBbox(canvas, arcPtr)
    Tk_Canvas canvas;                   /* Canvas that contains item. */
    ArcItem *arcPtr;                    /* Item whose bbox is to be
                                         * recomputed. */
{
    double tmp, center[2], point[2];
    double width;
    Tk_State state = arcPtr->header.state;

    if(state == TK_STATE_NULL) {
        state = ((TkCanvas *)canvas)->canvas_state;
    }

    width = arcPtr->outline.width;
    if (width < 1.0) {
        width = 1.0;
    }
    if (state==TK_STATE_HIDDEN) {
        arcPtr->header.x1 = arcPtr->header.x2 =
        arcPtr->header.y1 = arcPtr->header.y2 = -1;
        return;
    } else if (((TkCanvas *)canvas)->currentItemPtr == (Tk_Item *) arcPtr) {
        if (arcPtr->outline.activeWidth>width) {
            width = arcPtr->outline.activeWidth;
        }
    } else if (state==TK_STATE_DISABLED) {
        if (arcPtr->outline.disabledWidth>0) {
            width = arcPtr->outline.disabledWidth;
        }
    }

    /*
     * Make sure that the first coordinates are the lowest ones.
     */

    if (arcPtr->bbox[1] > arcPtr->bbox[3]) {
        double tmp;
        tmp = arcPtr->bbox[3];
        arcPtr->bbox[3] = arcPtr->bbox[1];
        arcPtr->bbox[1] = tmp;
    }
    if (arcPtr->bbox[0] > arcPtr->bbox[2]) {
        double tmp;
        tmp = arcPtr->bbox[2];
        arcPtr->bbox[2] = arcPtr->bbox[0];
        arcPtr->bbox[0] = tmp;
    }

    ComputeArcOutline(canvas,arcPtr);

    /*
     * To compute the bounding box, start with the the bbox formed
     * by the two endpoints of the arc.  Then add in the center of
     * the arc's oval (if relevant) and the 3-o'clock, 6-o'clock,
     * 9-o'clock, and 12-o'clock positions, if they are relevant.
     */

    arcPtr->header.x1 = arcPtr->header.x2 = (int) arcPtr->center1[0];
    arcPtr->header.y1 = arcPtr->header.y2 = (int) arcPtr->center1[1];
    TkIncludePoint((Tk_Item *) arcPtr, arcPtr->center2);
    center[0] = (arcPtr->bbox[0] + arcPtr->bbox[2])/2;
    center[1] = (arcPtr->bbox[1] + arcPtr->bbox[3])/2;
    if (arcPtr->style == PIESLICE_STYLE) {
        TkIncludePoint((Tk_Item *) arcPtr, center);
    }

    tmp = -arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        point[0] = arcPtr->bbox[2];
        point[1] = center[1];
        TkIncludePoint((Tk_Item *) arcPtr, point);
    }
    tmp = 90.0 - arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        point[0] = center[0];
        point[1] = arcPtr->bbox[1];
        TkIncludePoint((Tk_Item *) arcPtr, point);
    }
    tmp = 180.0 - arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        point[0] = arcPtr->bbox[0];
        point[1] = center[1];
        TkIncludePoint((Tk_Item *) arcPtr, point);
    }
    tmp = 270.0 - arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        point[0] = center[0];
        point[1] = arcPtr->bbox[3];
        TkIncludePoint((Tk_Item *) arcPtr, point);
    }

    /*
     * Lastly, expand by the width of the arc (if the arc's outline is
     * being drawn) and add one extra pixel just for safety.
     */

    if (arcPtr->outline.gc == None) {
        tmp = 1;
    } else {
        tmp = (int) ((width + 1.0)/2.0 + 1);
    }
    arcPtr->header.x1 -= (int) tmp;
    arcPtr->header.y1 -= (int) tmp;
    arcPtr->header.x2 += (int) tmp;
    arcPtr->header.y2 += (int) tmp;
}

/*
 *--------------------------------------------------------------
 *
 * DisplayArc --
 *
 *      This procedure is invoked to draw an arc item in a given
 *      drawable.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      ItemPtr is drawn in drawable using the transformation
 *      information in canvas.
 *
 *--------------------------------------------------------------
 */

static void
DisplayArc(canvas, itemPtr, display, drawable, x, y, width, height)
    Tk_Canvas canvas;                   /* Canvas that contains item. */
    Tk_Item *itemPtr;                   /* Item to be displayed. */
    Display *display;                   /* Display on which to draw item. */
    Drawable drawable;                  /* Pixmap or window in which to draw
                                         * item. */
    int x, y, width, height;            /* Describes region of canvas that
                                         * must be redisplayed (not used). */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;
    short x1, y1, x2, y2;
    int start, extent, dashnumber;
    double lineWidth;
    Tk_State state = itemPtr->state;
    Pixmap stipple;

    if(state == TK_STATE_NULL) {
        state = ((TkCanvas *)canvas)->canvas_state;
    }
    lineWidth = arcPtr->outline.width;
    if (lineWidth < 1.0) {
        lineWidth = 1.0;
    }
    dashnumber = arcPtr->outline.dash.number;
    stipple = arcPtr->fillStipple;
    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
        if (arcPtr->outline.activeWidth>lineWidth) {
            lineWidth = arcPtr->outline.activeWidth;
        }
        if (arcPtr->outline.activeDash.number != 0) {
            dashnumber = arcPtr->outline.activeDash.number;
        }
        if (arcPtr->activeFillStipple != None) {
            stipple = arcPtr->activeFillStipple;
        }
    } else if (state==TK_STATE_DISABLED) {
        if (arcPtr->outline.disabledWidth > 0) {
            lineWidth = arcPtr->outline.disabledWidth;
        }
        if (arcPtr->outline.disabledDash.number != 0) {
            dashnumber = arcPtr->outline.disabledDash.number;
        }
        if (arcPtr->disabledFillStipple != None) {
            stipple = arcPtr->disabledFillStipple;
        }
    }

    /*
     * Compute the screen coordinates of the bounding box for the item,
     * plus integer values for the angles.
     */

    Tk_CanvasDrawableCoords(canvas, arcPtr->bbox[0], arcPtr->bbox[1],
            &x1, &y1);
    Tk_CanvasDrawableCoords(canvas, arcPtr->bbox[2], arcPtr->bbox[3],
            &x2, &y2);
    if (x2 <= x1) {
        x2 = x1+1;
    }
    if (y2 <= y1) {
        y2 = y1+1;
    }
    start = (int) ((64*arcPtr->start) + 0.5);
    extent = (int) ((64*arcPtr->extent) + 0.5);

    /*
     * Display filled arc first (if wanted), then outline.  If the extent
     * is zero then don't invoke XFillArc or XDrawArc, since this causes
     * some window servers to crash and should be a no-op anyway.
     */

    if ((arcPtr->fillGC != None) && (extent != 0)) {
        if (stipple != None) {
            int w=0; int h=0;
            Tk_TSOffset *tsoffset = &arcPtr->tsoffset;
            int flags = tsoffset->flags;
            if (flags & (TK_OFFSET_CENTER|TK_OFFSET_MIDDLE)) {
                Tk_SizeOfBitmap(display, stipple, &w, &h);
                if (flags & TK_OFFSET_CENTER) {
                    w /= 2;
                } else {
                    w = 0;
                }
                if (flags & TK_OFFSET_MIDDLE) {
                    h /= 2;
                } else {
                    h = 0;
                }
            }
            tsoffset->xoffset -= w;
            tsoffset->yoffset -= h;
            Tk_CanvasSetOffset(canvas, arcPtr->fillGC, tsoffset);
            if (tsoffset) {
                tsoffset->xoffset += w;
                tsoffset->yoffset += h;
            }
        }
        XFillArc(display, drawable, arcPtr->fillGC, x1, y1, (unsigned) (x2-x1),
                (unsigned) (y2-y1), start, extent);
        if (stipple != None) {
            XSetTSOrigin(display, arcPtr->fillGC, 0, 0);
        }
    }
    if (arcPtr->outline.gc != None) {
        Tk_ChangeOutlineGC(canvas, itemPtr, &(arcPtr->outline));

        if (extent != 0) {
            XDrawArc(display, drawable, arcPtr->outline.gc, x1, y1,
                    (unsigned) (x2-x1), (unsigned) (y2-y1), start, extent);
        }

        /*
         * If the outline width is very thin, don't use polygons to draw
         * the linear parts of the outline (this often results in nothing
         * being displayed); just draw lines instead. The same is done if
         * the outline is dashed, because then polygons don't work.
         */

        if (lineWidth < 1.5 || dashnumber != 0) {
            Tk_CanvasDrawableCoords(canvas, arcPtr->center1[0],
                    arcPtr->center1[1], &x1, &y1);
            Tk_CanvasDrawableCoords(canvas, arcPtr->center2[0],
                    arcPtr->center2[1], &x2, &y2);

            if (arcPtr->style == CHORD_STYLE) {
                XDrawLine(display, drawable, arcPtr->outline.gc,
                        x1, y1, x2, y2);
            } else if (arcPtr->style == PIESLICE_STYLE) {
                short cx, cy;

                Tk_CanvasDrawableCoords(canvas,
                        (arcPtr->bbox[0] + arcPtr->bbox[2])/2.0,
                        (arcPtr->bbox[1] + arcPtr->bbox[3])/2.0, &cx, &cy);
                XDrawLine(display, drawable, arcPtr->outline.gc,
                        cx, cy, x1, y1);
                XDrawLine(display, drawable, arcPtr->outline.gc,
                        cx, cy, x2, y2);
            }
        } else {
            if (arcPtr->style == CHORD_STYLE) {
                TkFillPolygon(canvas, arcPtr->outlinePtr, CHORD_OUTLINE_PTS,
                        display, drawable, arcPtr->outline.gc, None);
            } else if (arcPtr->style == PIESLICE_STYLE) {
                TkFillPolygon(canvas, arcPtr->outlinePtr, PIE_OUTLINE1_PTS,
                        display, drawable, arcPtr->outline.gc, None);
                TkFillPolygon(canvas, arcPtr->outlinePtr + 2*PIE_OUTLINE1_PTS,
                        PIE_OUTLINE2_PTS, display, drawable, arcPtr->outline.gc,
                        None);
            }
        }

        Tk_ResetOutlineGC(canvas, itemPtr, &(arcPtr->outline));
    }
}

/*
 *--------------------------------------------------------------
 *
 * ArcToPoint --
 *
 *      Computes the distance from a given point to a given
 *      arc, in canvas units.
 *
 * Results:
 *      The return value is 0 if the point whose x and y coordinates
 *      are coordPtr[0] and coordPtr[1] is inside the arc.  If the
 *      point isn't inside the arc then the return value is the
 *      distance from the point to the arc.  If itemPtr is filled,
 *      then anywhere in the interior is considered "inside"; if
 *      itemPtr isn't filled, then "inside" means only the area
 *      occupied by the outline.
 *
 * Side effects:
 *      None.
 *
 *--------------------------------------------------------------
 */

        /* ARGSUSED */
static double
ArcToPoint(canvas, itemPtr, pointPtr)
    Tk_Canvas canvas;           /* Canvas containing item. */
    Tk_Item *itemPtr;           /* Item to check against point. */
    double *pointPtr;           /* Pointer to x and y coordinates. */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;
    double vertex[2], pointAngle, diff, dist, newDist;
    double poly[8], polyDist, width, t1, t2;
    int filled, angleInRange;
    Tk_State state = itemPtr->state;

    if(state == TK_STATE_NULL) {
        state = ((TkCanvas *)canvas)->canvas_state;
    }

    width = (double) arcPtr->outline.width;
    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
        if (arcPtr->outline.activeWidth>width) {
            width = (double) arcPtr->outline.activeWidth;
        }
    } else if (state == TK_STATE_DISABLED) {
        if (arcPtr->outline.disabledWidth>0) {
            width = (double) arcPtr->outline.disabledWidth;
        }
    }

    /*
     * See if the point is within the angular range of the arc.
     * Remember, X angles are backwards from the way we'd normally
     * think of them.  Also, compensate for any eccentricity of
     * the oval.
     */

    vertex[0] = (arcPtr->bbox[0] + arcPtr->bbox[2])/2.0;
    vertex[1] = (arcPtr->bbox[1] + arcPtr->bbox[3])/2.0;
    t1 = arcPtr->bbox[3] - arcPtr->bbox[1];
    if (t1 != 0.0) {
        t1 = (pointPtr[1] - vertex[1]) / t1;
    }
    t2 = arcPtr->bbox[2] - arcPtr->bbox[0];
    if (t2 != 0.0) {
        t2 = (pointPtr[0] - vertex[0]) / t2;
    }
    if ((t1 == 0.0) && (t2 == 0.0)) {
        pointAngle = 0;
    } else {
        pointAngle = -atan2(t1, t2)*180/PI;
    }
    diff = pointAngle - arcPtr->start;
    diff -= ((int) (diff/360.0) * 360.0);
    if (diff < 0) {
        diff += 360.0;
    }
    angleInRange = (diff <= arcPtr->extent) ||
            ((arcPtr->extent < 0) && ((diff - 360.0) >= arcPtr->extent));

    /*
     * Now perform different tests depending on what kind of arc
     * we're dealing with.
     */

    if (arcPtr->style == ARC_STYLE) {
        if (angleInRange) {
            return TkOvalToPoint(arcPtr->bbox, width,
                    0, pointPtr);
        }
        dist = hypot(pointPtr[0] - arcPtr->center1[0],
                pointPtr[1] - arcPtr->center1[1]);
        newDist = hypot(pointPtr[0] - arcPtr->center2[0],
                pointPtr[1] - arcPtr->center2[1]);
        if (newDist < dist) {
            return newDist;
        }
        return dist;
    }

    if ((arcPtr->fillGC != None) || (arcPtr->outline.gc == None)) {
        filled = 1;
    } else {
        filled = 0;
    }
    if (arcPtr->outline.gc == None) {
        width = 0.0;
    }

    if (arcPtr->style == PIESLICE_STYLE) {
        if (width > 1.0) {
            dist = TkPolygonToPoint(arcPtr->outlinePtr, PIE_OUTLINE1_PTS,
                    pointPtr);
            newDist = TkPolygonToPoint(arcPtr->outlinePtr + 2*PIE_OUTLINE1_PTS,
                        PIE_OUTLINE2_PTS, pointPtr);
        } else {
            dist = TkLineToPoint(vertex, arcPtr->center1, pointPtr);
            newDist = TkLineToPoint(vertex, arcPtr->center2, pointPtr);
        }
        if (newDist < dist) {
            dist = newDist;
        }
        if (angleInRange) {
            newDist = TkOvalToPoint(arcPtr->bbox, width, filled, pointPtr);
            if (newDist < dist) {
                dist = newDist;
            }
        }
        return dist;
    }

    /*
     * This is a chord-style arc.  We have to deal specially with the
     * triangular piece that represents the difference between a
     * chord-style arc and a pie-slice arc (for small angles this piece
     * is excluded here where it would be included for pie slices;
     * for large angles the piece is included here but would be
     * excluded for pie slices).
     */

    if (width > 1.0) {
        dist = TkPolygonToPoint(arcPtr->outlinePtr, CHORD_OUTLINE_PTS,
                    pointPtr);
    } else {
        dist = TkLineToPoint(arcPtr->center1, arcPtr->center2, pointPtr);
    }
    poly[0] = poly[6] = vertex[0];
    poly[1] = poly[7] = vertex[1];
    poly[2] = arcPtr->center1[0];
    poly[3] = arcPtr->center1[1];
    poly[4] = arcPtr->center2[0];
    poly[5] = arcPtr->center2[1];
    polyDist = TkPolygonToPoint(poly, 4, pointPtr);
    if (angleInRange) {
        if ((arcPtr->extent < -180.0) || (arcPtr->extent > 180.0)
                || (polyDist > 0.0)) {
            newDist = TkOvalToPoint(arcPtr->bbox, width, filled, pointPtr);
            if (newDist < dist) {
                dist = newDist;
            }
        }
    } else {
        if ((arcPtr->extent < -180.0) || (arcPtr->extent > 180.0)) {
            if (filled && (polyDist < dist)) {
                dist = polyDist;
            }
        }
    }
    return dist;
}

/*
 *--------------------------------------------------------------
 *
 * ArcToArea --
 *
 *      This procedure is called to determine whether an item
 *      lies entirely inside, entirely outside, or overlapping
 *      a given area.
 *
 * Results:
 *      -1 is returned if the item is entirely outside the area
 *      given by rectPtr, 0 if it overlaps, and 1 if it is entirely
 *      inside the given area.
 *
 * Side effects:
 *      None.
 *
 *--------------------------------------------------------------
 */

        /* ARGSUSED */
static int
ArcToArea(canvas, itemPtr, rectPtr)
    Tk_Canvas canvas;           /* Canvas containing item. */
    Tk_Item *itemPtr;           /* Item to check against arc. */
    double *rectPtr;            /* Pointer to array of four coordinates
                                 * (x1, y1, x2, y2) describing rectangular
                                 * area.  */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;
    double rx, ry;              /* Radii for transformed oval:  these define
                                 * an oval centered at the origin. */
    double tRect[4];            /* Transformed version of x1, y1, x2, y2,
                                 * for coord. system where arc is centered
                                 * on the origin. */
    double center[2], width, angle, tmp;
    double points[20], *pointPtr;
    int numPoints, filled;
    int inside;                 /* Non-zero means every test so far suggests
                                 * that arc is inside rectangle.  0 means
                                 * every test so far shows arc to be outside
                                 * of rectangle. */
    int newInside;
    Tk_State state = itemPtr->state;

    if(state == TK_STATE_NULL) {
        state = ((TkCanvas *)canvas)->canvas_state;
    }
    width = (double) arcPtr->outline.width;
    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
        if (arcPtr->outline.activeWidth>width) {
            width = (double) arcPtr->outline.activeWidth;
        }
    } else if (state==TK_STATE_DISABLED) {
        if (arcPtr->outline.disabledWidth>0) {
            width = (double) arcPtr->outline.disabledWidth;
        }
    }

    if ((arcPtr->fillGC != None) || (arcPtr->outline.gc == None)) {
        filled = 1;
    } else {
        filled = 0;
    }
    if (arcPtr->outline.gc == None) {
        width = 0.0;
    }

    /*
     * Transform both the arc and the rectangle so that the arc's oval
     * is centered on the origin.
     */

    center[0] = (arcPtr->bbox[0] + arcPtr->bbox[2])/2.0;
    center[1] = (arcPtr->bbox[1] + arcPtr->bbox[3])/2.0;
    tRect[0] = rectPtr[0] - center[0];
    tRect[1] = rectPtr[1] - center[1];
    tRect[2] = rectPtr[2] - center[0];
    tRect[3] = rectPtr[3] - center[1];
    rx = arcPtr->bbox[2] - center[0] + width/2.0;
    ry = arcPtr->bbox[3] - center[1] + width/2.0;

    /*
     * Find the extreme points of the arc and see whether these are all
     * inside the rectangle (in which case we're done), partly in and
     * partly out (in which case we're done), or all outside (in which
     * case we have more work to do).  The extreme points include the
     * following, which are checked in order:
     *
     * 1. The outside points of the arc, corresponding to start and
     *    extent.
     * 2. The center of the arc (but only in pie-slice mode).
     * 3. The 12, 3, 6, and 9-o'clock positions (but only if the arc
     *    includes those angles).
     */

    pointPtr = points;
    angle = -arcPtr->start*(PI/180.0);
    pointPtr[0] = rx*cos(angle);
    pointPtr[1] = ry*sin(angle);
    angle += -arcPtr->extent*(PI/180.0);
    pointPtr[2] = rx*cos(angle);
    pointPtr[3] = ry*sin(angle);
    numPoints = 2;
    pointPtr += 4;

    if ((arcPtr->style == PIESLICE_STYLE) && (arcPtr->extent < 180.0)) {
        pointPtr[0] = 0.0;
        pointPtr[1] = 0.0;
        numPoints++;
        pointPtr += 2;
    }

    tmp = -arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        pointPtr[0] = rx;
        pointPtr[1] = 0.0;
        numPoints++;
        pointPtr += 2;
    }
    tmp = 90.0 - arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        pointPtr[0] = 0.0;
        pointPtr[1] = -ry;
        numPoints++;
        pointPtr += 2;
    }
    tmp = 180.0 - arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        pointPtr[0] = -rx;
        pointPtr[1] = 0.0;
        numPoints++;
        pointPtr += 2;
    }
    tmp = 270.0 - arcPtr->start;
    if (tmp < 0) {
        tmp += 360.0;
    }
    if ((tmp < arcPtr->extent) || ((tmp-360) > arcPtr->extent)) {
        pointPtr[0] = 0.0;
        pointPtr[1] = ry;
        numPoints++;
    }

    /*
     * Now that we've located the extreme points, loop through them all
     * to see which are inside the rectangle.
     */

    inside = (points[0] > tRect[0]) && (points[0] < tRect[2])
            && (points[1] > tRect[1]) && (points[1] < tRect[3]);
    for (pointPtr = points+2; numPoints > 1; pointPtr += 2, numPoints--) {
        newInside = (pointPtr[0] > tRect[0]) && (pointPtr[0] < tRect[2])
                && (pointPtr[1] > tRect[1]) && (pointPtr[1] < tRect[3]);
        if (newInside != inside) {
            return 0;
        }
    }

    if (inside) {
        return 1;
    }

    /*
     * So far, oval appears to be outside rectangle, but can't yet tell
     * for sure.  Next, test each of the four sides of the rectangle
     * against the bounding region for the arc.  If any intersections
     * are found, then return "overlapping".  First, test against the
     * polygon(s) forming the sides of a chord or pie-slice.
     */

    if (arcPtr->style == PIESLICE_STYLE) {
        if (width >= 1.0) {
            if (TkPolygonToArea(arcPtr->outlinePtr, PIE_OUTLINE1_PTS,
                    rectPtr) != -1)  {
                return 0;
            }
            if (TkPolygonToArea(arcPtr->outlinePtr + 2*PIE_OUTLINE1_PTS,
                    PIE_OUTLINE2_PTS, rectPtr) != -1) {
                return 0;
            }
        } else {
            if ((TkLineToArea(center, arcPtr->center1, rectPtr) != -1) ||
                    (TkLineToArea(center, arcPtr->center2, rectPtr) != -1)) {
                return 0;
            }
        }
    } else if (arcPtr->style == CHORD_STYLE) {
        if (width >= 1.0) {
            if (TkPolygonToArea(arcPtr->outlinePtr, CHORD_OUTLINE_PTS,
                    rectPtr) != -1) {
                return 0;
            }
        } else {
            if (TkLineToArea(arcPtr->center1, arcPtr->center2,
                    rectPtr) != -1) {
                return 0;
            }
        }
    }

    /*
     * Next check for overlap between each of the four sides and the
     * outer perimiter of the arc.  If the arc isn't filled, then also
     * check the inner perimeter of the arc.
     */

    if (HorizLineToArc(tRect[0], tRect[2], tRect[1], rx, ry, arcPtr->start,
                arcPtr->extent)
            || HorizLineToArc(tRect[0], tRect[2], tRect[3], rx, ry,
                arcPtr->start, arcPtr->extent)
            || VertLineToArc(tRect[0], tRect[1], tRect[3], rx, ry,
                arcPtr->start, arcPtr->extent)
            || VertLineToArc(tRect[2], tRect[1], tRect[3], rx, ry,
                arcPtr->start, arcPtr->extent)) {
        return 0;
    }
    if ((width > 1.0) && !filled) {
        rx -= width;
        ry -= width;
        if (HorizLineToArc(tRect[0], tRect[2], tRect[1], rx, ry, arcPtr->start,
                    arcPtr->extent)
                || HorizLineToArc(tRect[0], tRect[2], tRect[3], rx, ry,
                    arcPtr->start, arcPtr->extent)
                || VertLineToArc(tRect[0], tRect[1], tRect[3], rx, ry,
                    arcPtr->start, arcPtr->extent)
                || VertLineToArc(tRect[2], tRect[1], tRect[3], rx, ry,
                    arcPtr->start, arcPtr->extent)) {
            return 0;
        }
    }

    /*
     * The arc still appears to be totally disjoint from the rectangle,
     * but it's also possible that the rectangle is totally inside the arc.
     * Do one last check, which is to check one point of the rectangle
     * to see if it's inside the arc.  If it is, we've got overlap.  If
     * it isn't, the arc's really outside the rectangle.
     */

    if (ArcToPoint(canvas, itemPtr, rectPtr) == 0.0) {
        return 0;
    }
    return -1;
}

/*
 *--------------------------------------------------------------
 *
 * ScaleArc --
 *
 *      This procedure is invoked to rescale an arc item.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      The arc referred to by itemPtr is rescaled so that the
 *      following transformation is applied to all point
 *      coordinates:
 *              x' = originX + scaleX*(x-originX)
 *              y' = originY + scaleY*(y-originY)
 *
 *--------------------------------------------------------------
 */

static void
ScaleArc(canvas, itemPtr, originX, originY, scaleX, scaleY)
    Tk_Canvas canvas;                   /* Canvas containing arc. */
    Tk_Item *itemPtr;                   /* Arc to be scaled. */
    double originX, originY;            /* Origin about which to scale rect. */
    double scaleX;                      /* Amount to scale in X direction. */
    double scaleY;                      /* Amount to scale in Y direction. */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;

    arcPtr->bbox[0] = originX + scaleX*(arcPtr->bbox[0] - originX);
    arcPtr->bbox[1] = originY + scaleY*(arcPtr->bbox[1] - originY);
    arcPtr->bbox[2] = originX + scaleX*(arcPtr->bbox[2] - originX);
    arcPtr->bbox[3] = originY + scaleY*(arcPtr->bbox[3] - originY);
    ComputeArcBbox(canvas, arcPtr);
}

/*
 *--------------------------------------------------------------
 *
 * TranslateArc --
 *
 *      This procedure is called to move an arc by a given amount.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      The position of the arc is offset by (xDelta, yDelta), and
 *      the bounding box is updated in the generic part of the item
 *      structure.
 *
 *--------------------------------------------------------------
 */

static void
TranslateArc(canvas, itemPtr, deltaX, deltaY)
    Tk_Canvas canvas;                   /* Canvas containing item. */
    Tk_Item *itemPtr;                   /* Item that is being moved. */
    double deltaX, deltaY;              /* Amount by which item is to be
                                         * moved. */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;

    arcPtr->bbox[0] += deltaX;
    arcPtr->bbox[1] += deltaY;
    arcPtr->bbox[2] += deltaX;
    arcPtr->bbox[3] += deltaY;
    ComputeArcBbox(canvas, arcPtr);
}

/*
 *--------------------------------------------------------------
 *
 * ComputeArcOutline --
 *
 *      This procedure creates a polygon describing everything in
 *      the outline for an arc except what's in the curved part.
 *      For a "pie slice" arc this is a V-shaped chunk, and for
 *      a "chord" arc this is a linear chunk (with cutaway corners).
 *      For "arc" arcs, this stuff isn't relevant.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      The information at arcPtr->outlinePtr gets modified, and
 *      storage for arcPtr->outlinePtr may be allocated or freed.
 *
 *--------------------------------------------------------------
 */

static void
ComputeArcOutline(canvas,arcPtr)
    Tk_Canvas canvas;                   /* Information about overall canvas. */
    ArcItem *arcPtr;                    /* Information about arc. */
{
    double sin1, cos1, sin2, cos2, angle, width, halfWidth;
    double boxWidth, boxHeight;
    double vertex[2], corner1[2], corner2[2];
    double *outlinePtr;
    Tk_State state = arcPtr->header.state;


    /*
     * Make sure that the outlinePtr array is large enough to hold
     * either a chord or pie-slice outline.
     */

    if (arcPtr->numOutlinePoints == 0) {
        arcPtr->outlinePtr = (double *) ckalloc((unsigned)
                (26 * sizeof(double)));
        arcPtr->numOutlinePoints = 22;
    }
    outlinePtr = arcPtr->outlinePtr;

    if(state == TK_STATE_NULL) {
        state = ((TkCanvas *)canvas)->canvas_state;
    }

    /*
     * First compute the two points that lie at the centers of
     * the ends of the curved arc segment, which are marked with
     * X's in the figure below:
     *
     *
     *                            * * *
     *                        *          *
     *                     *      * *      *
     *                   *    *         *    *
     *                  *   *             *   *
     *                   X *               * X
     *
     * The code is tricky because the arc can be ovular in shape.
     * It computes the position for a unit circle, and then
     * scales to fit the shape of the arc's bounding box.
     *
     * Also, watch out because angles go counter-clockwise like you
     * might expect, but the y-coordinate system is inverted.  To
     * handle this, just negate the angles in all the computations.
     */

    boxWidth = arcPtr->bbox[2] - arcPtr->bbox[0];
    boxHeight = arcPtr->bbox[3] - arcPtr->bbox[1];
    angle = -arcPtr->start*PI/180.0;
    sin1 = sin(angle);
    cos1 = cos(angle);
    angle -= arcPtr->extent*PI/180.0;
    sin2 = sin(angle);
    cos2 = cos(angle);
    vertex[0] = (arcPtr->bbox[0] + arcPtr->bbox[2])/2.0;
    vertex[1] = (arcPtr->bbox[1] + arcPtr->bbox[3])/2.0;
    arcPtr->center1[0] = vertex[0] + cos1*boxWidth/2.0;
    arcPtr->center1[1] = vertex[1] + sin1*boxHeight/2.0;
    arcPtr->center2[0] = vertex[0] + cos2*boxWidth/2.0;
    arcPtr->center2[1] = vertex[1] + sin2*boxHeight/2.0;

    /*
     * Next compute the "outermost corners" of the arc, which are
     * marked with X's in the figure below:
     *
     *                            * * *
     *                        *          *
     *                     *      * *      *
     *                   *    *         *    *
     *                  X   *             *   X
     *                     *               *
     *
     * The code below is tricky because it has to handle eccentricity
     * in the shape of the oval.  The key in the code below is to
     * realize that the slope of the line from arcPtr->center1 to corner1
     * is (boxWidth*sin1)/(boxHeight*cos1), and similarly for arcPtr->center2
     * and corner2.  These formulas can be computed from the formula for
     * the oval.
     */

    width = arcPtr->outline.width;
    if (((TkCanvas *)canvas)->currentItemPtr == (Tk_Item *) arcPtr) {
        if (arcPtr->outline.activeWidth>arcPtr->outline.width) {
            width = arcPtr->outline.activeWidth;
        }
    } else if (state==TK_STATE_DISABLED) {
        if (arcPtr->outline.disabledWidth>arcPtr->outline.width) {
            width = arcPtr->outline.disabledWidth;
        }
    }
    halfWidth = width/2.0;

    if (((boxWidth*sin1) == 0.0) && ((boxHeight*cos1) == 0.0)) {
        angle = 0.0;
    } else {
        angle = atan2(boxWidth*sin1, boxHeight*cos1);
    }
    corner1[0] = arcPtr->center1[0] + cos(angle)*halfWidth;
    corner1[1] = arcPtr->center1[1] + sin(angle)*halfWidth;
    if (((boxWidth*sin2) == 0.0) && ((boxHeight*cos2) == 0.0)) {
        angle = 0.0;
    } else {
        angle = atan2(boxWidth*sin2, boxHeight*cos2);
    }
    corner2[0] = arcPtr->center2[0] + cos(angle)*halfWidth;
    corner2[1] = arcPtr->center2[1] + sin(angle)*halfWidth;

    /*
     * For a chord outline, generate a six-sided polygon with three
     * points for each end of the chord.  The first and third points
     * for each end are butt points generated on either side of the
     * center point.  The second point is the corner point.
     */

    if (arcPtr->style == CHORD_STYLE) {
        outlinePtr[0] = outlinePtr[12] = corner1[0];
        outlinePtr[1] = outlinePtr[13] = corner1[1];
        TkGetButtPoints(arcPtr->center2, arcPtr->center1,
                width, 0, outlinePtr+10, outlinePtr+2);
        outlinePtr[4] = arcPtr->center2[0] + outlinePtr[2]
                - arcPtr->center1[0];
        outlinePtr[5] = arcPtr->center2[1] + outlinePtr[3]
                - arcPtr->center1[1];
        outlinePtr[6] = corner2[0];
        outlinePtr[7] = corner2[1];
        outlinePtr[8] = arcPtr->center2[0] + outlinePtr[10]
                - arcPtr->center1[0];
        outlinePtr[9] = arcPtr->center2[1] + outlinePtr[11]
                - arcPtr->center1[1];
    } else if (arcPtr->style == PIESLICE_STYLE) {
        /*
         * For pie slices, generate two polygons, one for each side
         * of the pie slice.  The first arm has a shape like this,
         * where the center of the oval is X, arcPtr->center1 is at Y, and
         * corner1 is at Z:
         *
         *       _____________________
         *      |                     \
         *      |                      \
         *      X                    Y  Z
         *      |                      /
         *      |_____________________/
         *
         */

        TkGetButtPoints(arcPtr->center1, vertex, width, 0,
                outlinePtr, outlinePtr+2);
        outlinePtr[4] = arcPtr->center1[0] + outlinePtr[2] - vertex[0];
        outlinePtr[5] = arcPtr->center1[1] + outlinePtr[3] - vertex[1];
        outlinePtr[6] = corner1[0];
        outlinePtr[7] = corner1[1];
        outlinePtr[8] = arcPtr->center1[0] + outlinePtr[0] - vertex[0];
        outlinePtr[9] = arcPtr->center1[1] + outlinePtr[1] - vertex[1];
        outlinePtr[10] = outlinePtr[0];
        outlinePtr[11] = outlinePtr[1];

        /*
         * The second arm has a shape like this:
         *
         *
         *         ______________________
         *        /                       \
         *       /                         \
         *      Z  Y                    X  /
         *       \                        /
         *        \______________________/
         *
         * Similar to above X is the center of the oval/circle, Y is
         * arcPtr->center2, and Z is corner2.  The extra jog out to the left
         * of X is needed in or to produce a butted joint with the
         * first arm;  the corner to the right of X is one of the
         * first two points of the first arm, depending on extent.
         */

        TkGetButtPoints(arcPtr->center2, vertex, width, 0,
                outlinePtr+12, outlinePtr+16);
        if ((arcPtr->extent > 180) ||
                ((arcPtr->extent < 0) && (arcPtr->extent > -180))) {
            outlinePtr[14] = outlinePtr[0];
            outlinePtr[15] = outlinePtr[1];
        } else {
            outlinePtr[14] = outlinePtr[2];
            outlinePtr[15] = outlinePtr[3];
        }
        outlinePtr[18] = arcPtr->center2[0] + outlinePtr[16] - vertex[0];
        outlinePtr[19] = arcPtr->center2[1] + outlinePtr[17] - vertex[1];
        outlinePtr[20] = corner2[0];
        outlinePtr[21] = corner2[1];
        outlinePtr[22] = arcPtr->center2[0] + outlinePtr[12] - vertex[0];
        outlinePtr[23] = arcPtr->center2[1] + outlinePtr[13] - vertex[1];
        outlinePtr[24] = outlinePtr[12];
        outlinePtr[25] = outlinePtr[13];
    }
}

/*
 *--------------------------------------------------------------
 *
 * HorizLineToArc --
 *
 *      Determines whether a horizontal line segment intersects
 *      a given arc.
 *
 * Results:
 *      The return value is 1 if the given line intersects the
 *      infinitely-thin arc section defined by rx, ry, start,
 *      and extent, and 0 otherwise.  Only the perimeter of the
 *      arc is checked: interior areas (e.g. pie-slice or chord)
 *      are not checked.
 *
 * Side effects:
 *      None.
 *
 *--------------------------------------------------------------
 */

static int
HorizLineToArc(x1, x2, y, rx, ry, start, extent)
    double x1, x2;              /* X-coords of endpoints of line segment. 
                                 * X1 must be <= x2. */
    double y;                   /* Y-coordinate of line segment. */
    double rx, ry;              /* These x- and y-radii define an oval
                                 * centered at the origin. */
    double start, extent;       /* Angles that define extent of arc, in
                                 * the standard fashion for this module. */
{
    double tmp;
    double tx, ty;              /* Coordinates of intersection point in
                                 * transformed coordinate system. */
    double x;

    /*
     * Compute the x-coordinate of one possible intersection point
     * between the arc and the line.  Use a transformed coordinate
     * system where the oval is a unit circle centered at the origin.
     * Then scale back to get actual x-coordinate.
     */

    ty = y/ry;
    tmp = 1 - ty*ty;
    if (tmp < 0) {
        return 0;
    }
    tx = sqrt(tmp);
    x = tx*rx;

    /*
     * Test both intersection points.
     */

    if ((x >= x1) && (x <= x2) && AngleInRange(tx, ty, start, extent)) {
        return 1;
    }
    if ((-x >= x1) && (-x <= x2) && AngleInRange(-tx, ty, start, extent)) {
        return 1;
    }
    return 0;
}

/*
 *--------------------------------------------------------------
 *
 * VertLineToArc --
 *
 *      Determines whether a vertical line segment intersects
 *      a given arc.
 *
 * Results:
 *      The return value is 1 if the given line intersects the
 *      infinitely-thin arc section defined by rx, ry, start,
 *      and extent, and 0 otherwise.  Only the perimeter of the
 *      arc is checked: interior areas (e.g. pie-slice or chord)
 *      are not checked.
 *
 * Side effects:
 *      None.
 *
 *--------------------------------------------------------------
 */

static int
VertLineToArc(x, y1, y2, rx, ry, start, extent)
    double x;                   /* X-coordinate of line segment. */
    double y1, y2;              /* Y-coords of endpoints of line segment. 
                                 * Y1 must be <= y2. */
    double rx, ry;              /* These x- and y-radii define an oval
                                 * centered at the origin. */
    double start, extent;       /* Angles that define extent of arc, in
                                 * the standard fashion for this module. */
{
    double tmp;
    double tx, ty;              /* Coordinates of intersection point in
                                 * transformed coordinate system. */
    double y;

    /*
     * Compute the y-coordinate of one possible intersection point
     * between the arc and the line.  Use a transformed coordinate
     * system where the oval is a unit circle centered at the origin.
     * Then scale back to get actual y-coordinate.
     */

    tx = x/rx;
    tmp = 1 - tx*tx;
    if (tmp < 0) {
        return 0;
    }
    ty = sqrt(tmp);
    y = ty*ry;

    /*
     * Test both intersection points.
     */

    if ((y > y1) && (y < y2) && AngleInRange(tx, ty, start, extent)) {
        return 1;
    }
    if ((-y > y1) && (-y < y2) && AngleInRange(tx, -ty, start, extent)) {
        return 1;
    }
    return 0;
}

/*
 *--------------------------------------------------------------
 *
 * AngleInRange --
 *
 *      Determine whether the angle from the origin to a given
 *      point is within a given range.
 *
 * Results:
 *      The return value is 1 if the angle from (0,0) to (x,y)
 *      is in the range given by start and extent, where angles
 *      are interpreted in the standard way for ovals (meaning
 *      backwards from normal interpretation).  Otherwise the
 *      return value is 0.
 *
 * Side effects:
 *      None.
 *
 *--------------------------------------------------------------
 */

static int
AngleInRange(x, y, start, extent)
    double x, y;                /* Coordinate of point;  angle measured
                                 * from origin to here, relative to x-axis. */
    double start;               /* First angle, degrees, >=0, <=360. */
    double extent;              /* Size of arc in degrees >=-360, <=360. */
{
    double diff;

    if ((x == 0.0) && (y == 0.0)) {
        return 1;
    }
    diff = -atan2(y, x);
    diff = diff*(180.0/PI) - start;
    while (diff > 360.0) {
        diff -= 360.0;
    }
    while (diff < 0.0) {
        diff += 360.0;
    }
    if (extent >= 0) {
        return diff <= extent;
    }
    return (diff-360.0) >= extent;
}

/*
 *--------------------------------------------------------------
 *
 * ArcToPostscript --
 *
 *      This procedure is called to generate Postscript for
 *      arc items.
 *
 * Results:
 *      The return value is a standard Tcl result.  If an error
 *      occurs in generating Postscript then an error message is
 *      left in the interp's result, replacing whatever used
 *      to be there.  If no error occurs, then Postscript for the
 *      item is appended to the result.
 *
 * Side effects:
 *      None.
 *
 *--------------------------------------------------------------
 */

static int
ArcToPostscript(interp, canvas, itemPtr, prepass)
    Tcl_Interp *interp;                 /* Leave Postscript or error message
                                         * here. */
    Tk_Canvas canvas;                   /* Information about overall canvas. */
    Tk_Item *itemPtr;                   /* Item for which Postscript is
                                         * wanted. */
    int prepass;                        /* 1 means this is a prepass to
                                         * collect font information;  0 means
                                         * final Postscript is being created. */
{
    ArcItem *arcPtr = (ArcItem *) itemPtr;
    char buffer[400];
    double y1, y2, ang1, ang2;
    XColor *color;
    Pixmap stipple;
    XColor *fillColor;
    Pixmap fillStipple;
    Tk_State state = itemPtr->state;

    y1 = Tk_CanvasPsY(canvas, arcPtr->bbox[1]);
    y2 = Tk_CanvasPsY(canvas, arcPtr->bbox[3]);
    ang1 = arcPtr->start;
    ang2 = ang1 + arcPtr->extent;
    if (ang2 < ang1) {
        ang1 = ang2;
        ang2 = arcPtr->start;
    }

    if(state == TK_STATE_NULL) {
        state = ((TkCanvas *)canvas)->canvas_state;
    }
    color = arcPtr->outline.color;
    stipple = arcPtr->outline.stipple;
    fillColor = arcPtr->fillColor;
    fillStipple = arcPtr->fillStipple;
    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
        if (arcPtr->outline.activeColor!=NULL) {
            color = arcPtr->outline.activeColor;
        }
        if (arcPtr->outline.activeStipple!=None) {
            stipple = arcPtr->outline.activeStipple;
        }
        if (arcPtr->activeFillColor!=NULL) {
            fillColor = arcPtr->activeFillColor;
        }
        if (arcPtr->activeFillStipple!=None) {
            fillStipple = arcPtr->activeFillStipple;
        }
    } else if (state==TK_STATE_DISABLED) {
        if (arcPtr->outline.disabledColor!=NULL) {
            color = arcPtr->outline.disabledColor;
        }
        if (arcPtr->outline.disabledStipple!=None) {
            stipple = arcPtr->outline.disabledStipple;
        }
        if (arcPtr->disabledFillColor!=NULL) {
            fillColor = arcPtr->disabledFillColor;
        }
        if (arcPtr->disabledFillStipple!=None) {
            fillStipple = arcPtr->disabledFillStipple;
        }
    }

    /*
     * If the arc is filled, output Postscript for the interior region
     * of the arc.
     */

    if (arcPtr->fillGC != None) {
        sprintf(buffer, "matrix currentmatrix\n%.15g %.15g translate %.15g %.15g scale\n",
                (arcPtr->bbox[0] + arcPtr->bbox[2])/2, (y1 + y2)/2,
                (arcPtr->bbox[2] - arcPtr->bbox[0])/2, (y1 - y2)/2);
        Tcl_AppendResult(interp, buffer, (char *) NULL);
        if (arcPtr->style == CHORD_STYLE) {
            sprintf(buffer, "0 0 1 %.15g %.15g arc closepath\nsetmatrix\n",
                    ang1, ang2);
        } else {
            sprintf(buffer,
                    "0 0 moveto 0 0 1 %.15g %.15g arc closepath\nsetmatrix\n",
                    ang1, ang2);
        }
        Tcl_AppendResult(interp, buffer, (char *) NULL);
        if (Tk_CanvasPsColor(interp, canvas, fillColor) != TCL_OK) {
            return TCL_ERROR;
        };
        if (fillStipple != None) {
            Tcl_AppendResult(interp, "clip ", (char *) NULL);
            if (Tk_CanvasPsStipple(interp, canvas, fillStipple)
                    != TCL_OK) {
                return TCL_ERROR;
            }
            if (arcPtr->outline.gc != None) {
                Tcl_AppendResult(interp, "grestore gsave\n", (char *) NULL);
            }
        } else {
            Tcl_AppendResult(interp, "fill\n", (char *) NULL);
        }
    }

    /*
     * If there's an outline for the arc, draw it.
     */

    if (arcPtr->outline.gc != None) {
        sprintf(buffer, "matrix currentmatrix\n%.15g %.15g translate %.15g %.15g scale\n",
                (arcPtr->bbox[0] + arcPtr->bbox[2])/2, (y1 + y2)/2,
                (arcPtr->bbox[2] - arcPtr->bbox[0])/2, (y1 - y2)/2);
        Tcl_AppendResult(interp, buffer, (char *) NULL);
        sprintf(buffer, "0 0 1 %.15g %.15g", ang1, ang2);
        Tcl_AppendResult(interp, buffer,
                " arc\nsetmatrix\n0 setlinecap\n", (char *) NULL);
        if (Tk_CanvasPsOutline(canvas, itemPtr,
                &(arcPtr->outline)) != TCL_OK) {
            return TCL_ERROR;
        }
        if (arcPtr->style != ARC_STYLE) {
            Tcl_AppendResult(interp, "grestore gsave\n", (char *) NULL);
            if (arcPtr->style == CHORD_STYLE) {
                Tk_CanvasPsPath(interp, canvas, arcPtr->outlinePtr,
                        CHORD_OUTLINE_PTS);
            } else {
                Tk_CanvasPsPath(interp, canvas, arcPtr->outlinePtr,
                        PIE_OUTLINE1_PTS);
                if (Tk_CanvasPsColor(interp, canvas, color)
                        != TCL_OK) {
                    return TCL_ERROR;
                }
                if (stipple != None) {
                    Tcl_AppendResult(interp, "clip ", (char *) NULL);
                    if (Tk_CanvasPsStipple(interp, canvas,
                            stipple) != TCL_OK) {
                        return TCL_ERROR;
                    }
                } else {
                    Tcl_AppendResult(interp, "fill\n", (char *) NULL);
                }
                Tcl_AppendResult(interp, "grestore gsave\n", (char *) NULL);
                Tk_CanvasPsPath(interp, canvas,
                        arcPtr->outlinePtr + 2*PIE_OUTLINE1_PTS,
                        PIE_OUTLINE2_PTS);
            }
            if (Tk_CanvasPsColor(interp, canvas, color)
                    != TCL_OK) {
                return TCL_ERROR;
            }
            if (stipple != None) {
                Tcl_AppendResult(interp, "clip ", (char *) NULL);
                if (Tk_CanvasPsStipple(interp, canvas,
                        stipple) != TCL_OK) {
                    return TCL_ERROR;
                }
            } else {
                Tcl_AppendResult(interp, "fill\n", (char *) NULL);
            }
        }
    }

    return TCL_OK;
}

/*
 *--------------------------------------------------------------
 *
 * StyleParseProc --
 *
 *      This procedure is invoked during option processing to handle
 *      the "-style" option.
 *
 * Results:
 *      A standard Tcl return value.
 *
 * Side effects:
 *      The state for a given item gets replaced by the state
 *      indicated in the value argument.
 *
 *--------------------------------------------------------------
 */

static int
StyleParseProc(clientData, interp, tkwin, value, widgRec, offset)
    ClientData clientData;              /* some flags.*/
    Tcl_Interp *interp;                 /* Used for reporting errors. */
    Tk_Window tkwin;                    /* Window containing canvas widget. */
    CONST char *value;                  /* Value of option. */
    char *widgRec;                      /* Pointer to record for item. */
    int offset;                         /* Offset into item. */
{
    int c;
    size_t length;

    register Style *stylePtr = (Style *) (widgRec + offset);

    if(value == NULL || *value == 0) {
        *stylePtr = PIESLICE_STYLE;
        return TCL_OK;
    }

    c = value[0];
    length = strlen(value);

    if ((c == 'a') && (strncmp(value, "arc", length) == 0)) {
        *stylePtr = ARC_STYLE;
        return TCL_OK;
    }
    if ((c == 'c') && (strncmp(value, "chord", length) == 0)) {
        *stylePtr = CHORD_STYLE;
        return TCL_OK;
    }
    if ((c == 'p') && (strncmp(value, "pieslice", length) == 0)) {
        *stylePtr = PIESLICE_STYLE;
        return TCL_OK;
    }

    Tcl_AppendResult(interp, "bad -style option \"",
            value, "\": must be arc, chord, or pieslice",
            (char *) NULL);
    *stylePtr = PIESLICE_STYLE;
    return TCL_ERROR;
}

/*
 *--------------------------------------------------------------
 *
 * StylePrintProc --
 *
 *      This procedure is invoked by the Tk configuration code
 *      to produce a printable string for the "-style"
 *      configuration option.
 *
 * Results:
 *      The return value is a string describing the state for
 *      the item referred to by "widgRec".  In addition, *freeProcPtr
 *      is filled in with the address of a procedure to call to free
 *      the result string when it's no longer needed (or NULL to
 *      indicate that the string doesn't need to be freed).
 *
 * Side effects:
 *      None.
 *
 *--------------------------------------------------------------
 */

static char *
StylePrintProc(clientData, tkwin, widgRec, offset, freeProcPtr)
    ClientData clientData;              /* Ignored. */
    Tk_Window tkwin;                    /* Ignored. */
    char *widgRec;                      /* Pointer to record for item. */
    int offset;                         /* Offset into item. */
    Tcl_FreeProc **freeProcPtr;         /* Pointer to variable to fill in with
                                         * information about how to reclaim
                                         * storage for return string. */
{
    register Style *stylePtr = (Style *) (widgRec + offset);

    if (*stylePtr==ARC_STYLE) {
        return "arc";
    } else if (*stylePtr==CHORD_STYLE) {
        return "chord";
    } else {
        return "pieslice";
    }
}

/* End of tkcanvarc.c */