/* $Header: /cvsroot/esrg/sfesrg/esrgpcpj/shared/tcl_base/tclwinconsole.c,v 1.1.1.1 2001/06/13 04:48:32 dtashley Exp $ */ /* * tclWinConsole.c -- * * This file implements the Windows-specific console functions, * and the "console" channel driver. * * Copyright (c) 1999 by Scriptics Corp. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclwinconsole.c,v 1.1.1.1 2001/06/13 04:48:32 dtashley Exp $ */ #include "tclWinInt.h" #include #include #include #include /* * The following variable is used to tell whether this module has been * initialized. */ static int initialized = 0; /* * The consoleMutex locks around access to the initialized variable, and it is * used to protect background threads from being terminated while they are * using APIs that hold locks. */ TCL_DECLARE_MUTEX(consoleMutex) /* * Bit masks used in the flags field of the ConsoleInfo structure below. */ #define CONSOLE_PENDING (1<<0) /* Message is pending in the queue. */ #define CONSOLE_ASYNC (1<<1) /* Channel is non-blocking. */ /* * Bit masks used in the sharedFlags field of the ConsoleInfo structure below. */ #define CONSOLE_EOF (1<<2) /* Console has reached EOF. */ #define CONSOLE_BUFFERED (1<<3) /* data was read into a buffer by the reader thread */ #define CONSOLE_BUFFER_SIZE (8*1024) /* * This structure describes per-instance data for a console based channel. */ typedef struct ConsoleInfo { HANDLE handle; int type; struct ConsoleInfo *nextPtr;/* Pointer to next registered console. */ Tcl_Channel channel; /* Pointer to channel structure. */ int validMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which operations are valid on the file. */ int watchMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which events should be reported. */ int flags; /* State flags, see above for a list. */ Tcl_ThreadId threadId; /* Thread to which events should be reported. * This value is used by the reader/writer * threads. */ HANDLE writeThread; /* Handle to writer thread. */ HANDLE readThread; /* Handle to reader thread. */ HANDLE writable; /* Manual-reset event to signal when the * writer thread has finished waiting for * the current buffer to be written. */ HANDLE readable; /* Manual-reset event to signal when the * reader thread has finished waiting for * input. */ HANDLE startWriter; /* Auto-reset event used by the main thread to * signal when the writer thread should attempt * to write to the console. */ HANDLE startReader; /* Auto-reset event used by the main thread to * signal when the reader thread should attempt * to read from the console. */ DWORD writeError; /* An error caused by the last background * write. Set to 0 if no error has been * detected. This word is shared with the * writer thread so access must be * synchronized with the writable object. */ char *writeBuf; /* Current background output buffer. * Access is synchronized with the writable * object. */ int writeBufLen; /* Size of write buffer. Access is * synchronized with the writable * object. */ int toWrite; /* Current amount to be written. Access is * synchronized with the writable object. */ int readFlags; /* Flags that are shared with the reader * thread. Access is synchronized with the * readable object. */ int bytesRead; /* number of bytes in the buffer */ int offset; /* number of bytes read out of the buffer */ char buffer[CONSOLE_BUFFER_SIZE]; /* Data consumed by reader thread. */ } ConsoleInfo; typedef struct ThreadSpecificData { /* * The following pointer refers to the head of the list of consoles * that are being watched for file events. */ ConsoleInfo *firstConsolePtr; } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* * The following structure is what is added to the Tcl event queue when * console events are generated. */ typedef struct ConsoleEvent { Tcl_Event header; /* Information that is standard for * all events. */ ConsoleInfo *infoPtr; /* Pointer to console info structure. Note * that we still have to verify that the * console exists before dereferencing this * pointer. */ } ConsoleEvent; /* * Declarations for functions used only in this file. */ static int ApplicationType(Tcl_Interp *interp, const char *fileName, char *fullName); static void BuildCommandLine(const char *executable, int argc, char **argv, Tcl_DString *linePtr); static void CopyChannel(HANDLE dst, HANDLE src); static BOOL HasConsole(void); static TclFile MakeFile(HANDLE handle); static char * MakeTempFile(Tcl_DString *namePtr); static int ConsoleBlockModeProc(ClientData instanceData, int mode); static void ConsoleCheckProc(ClientData clientData, int flags); static int ConsoleCloseProc(ClientData instanceData, Tcl_Interp *interp); static int ConsoleEventProc(Tcl_Event *evPtr, int flags); static void ConsoleExitHandler(ClientData clientData); static int ConsoleGetHandleProc(ClientData instanceData, int direction, ClientData *handlePtr); static ThreadSpecificData *ConsoleInit(void); static int ConsoleInputProc(ClientData instanceData, char *buf, int toRead, int *errorCode); static int ConsoleOutputProc(ClientData instanceData, char *buf, int toWrite, int *errorCode); static DWORD WINAPI ConsoleReaderThread(LPVOID arg); static void ConsoleSetupProc(ClientData clientData, int flags); static void ConsoleWatchProc(ClientData instanceData, int mask); static DWORD WINAPI ConsoleWriterThread(LPVOID arg); static void ProcExitHandler(ClientData clientData); static int TempFileName(WCHAR name[MAX_PATH]); static int WaitForRead(ConsoleInfo *infoPtr, int blocking); /* * This structure describes the channel type structure for command console * based IO. */ static Tcl_ChannelType consoleChannelType = { "console", /* Type name. */ ConsoleBlockModeProc, /* Set blocking or non-blocking mode.*/ ConsoleCloseProc, /* Close proc. */ ConsoleInputProc, /* Input proc. */ ConsoleOutputProc, /* Output proc. */ NULL, /* Seek proc. */ NULL, /* Set option proc. */ NULL, /* Get option proc. */ ConsoleWatchProc, /* Set up notifier to watch the channel. */ ConsoleGetHandleProc, /* Get an OS handle from channel. */ }; /* *---------------------------------------------------------------------- * * ConsoleInit -- * * This function initializes the static variables for this file. * * Results: * None. * * Side effects: * Creates a new event source. * *---------------------------------------------------------------------- */ static ThreadSpecificData * ConsoleInit() { ThreadSpecificData *tsdPtr; /* * Check the initialized flag first, then check again in the mutex. * This is a speed enhancement. */ if (!initialized) { Tcl_MutexLock(&consoleMutex); if (!initialized) { initialized = 1; Tcl_CreateExitHandler(ProcExitHandler, NULL); } Tcl_MutexUnlock(&consoleMutex); } tsdPtr = (ThreadSpecificData *)TclThreadDataKeyGet(&dataKey); if (tsdPtr == NULL) { tsdPtr = TCL_TSD_INIT(&dataKey); tsdPtr->firstConsolePtr = NULL; Tcl_CreateEventSource(ConsoleSetupProc, ConsoleCheckProc, NULL); Tcl_CreateThreadExitHandler(ConsoleExitHandler, NULL); } return tsdPtr; } /* *---------------------------------------------------------------------- * * ConsoleExitHandler -- * * This function is called to cleanup the console module before * Tcl is unloaded. * * Results: * None. * * Side effects: * Removes the console event source. * *---------------------------------------------------------------------- */ static void ConsoleExitHandler( ClientData clientData) /* Old window proc */ { Tcl_DeleteEventSource(ConsoleSetupProc, ConsoleCheckProc, NULL); } /* *---------------------------------------------------------------------- * * ProcExitHandler -- * * This function is called to cleanup the process list before * Tcl is unloaded. * * Results: * None. * * Side effects: * Resets the process list. * *---------------------------------------------------------------------- */ static void ProcExitHandler( ClientData clientData) /* Old window proc */ { Tcl_MutexLock(&consoleMutex); initialized = 0; Tcl_MutexUnlock(&consoleMutex); } /* *---------------------------------------------------------------------- * * ConsoleSetupProc -- * * This procedure is invoked before Tcl_DoOneEvent blocks waiting * for an event. * * Results: * None. * * Side effects: * Adjusts the block time if needed. * *---------------------------------------------------------------------- */ void ConsoleSetupProc( ClientData data, /* Not used. */ int flags) /* Event flags as passed to Tcl_DoOneEvent. */ { ConsoleInfo *infoPtr; Tcl_Time blockTime = { 0, 0 }; int block = 1; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!(flags & TCL_FILE_EVENTS)) { return; } /* * Look to see if any events are already pending. If they are, poll. */ for (infoPtr = tsdPtr->firstConsolePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr->watchMask & TCL_WRITABLE) { if (WaitForSingleObject(infoPtr->writable, 0) != WAIT_TIMEOUT) { block = 0; } } if (infoPtr->watchMask & TCL_READABLE) { if (WaitForRead(infoPtr, 0) >= 0) { block = 0; } } } if (!block) { Tcl_SetMaxBlockTime(&blockTime); } } /* *---------------------------------------------------------------------- * * ConsoleCheckProc -- * * This procedure is called by Tcl_DoOneEvent to check the console * event source for events. * * Results: * None. * * Side effects: * May queue an event. * *---------------------------------------------------------------------- */ static void ConsoleCheckProc( ClientData data, /* Not used. */ int flags) /* Event flags as passed to Tcl_DoOneEvent. */ { ConsoleInfo *infoPtr; ConsoleEvent *evPtr; int needEvent; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!(flags & TCL_FILE_EVENTS)) { return; } /* * Queue events for any ready consoles that don't already have events * queued. */ for (infoPtr = tsdPtr->firstConsolePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr->flags & CONSOLE_PENDING) { continue; } /* * Queue an event if the console is signaled for reading or writing. */ needEvent = 0; if (infoPtr->watchMask & TCL_WRITABLE) { if (WaitForSingleObject(infoPtr->writable, 0) != WAIT_TIMEOUT) { needEvent = 1; } } if (infoPtr->watchMask & TCL_READABLE) { if (WaitForRead(infoPtr, 0) >= 0) { needEvent = 1; } } if (needEvent) { infoPtr->flags |= CONSOLE_PENDING; evPtr = (ConsoleEvent *) ckalloc(sizeof(ConsoleEvent)); evPtr->header.proc = ConsoleEventProc; evPtr->infoPtr = infoPtr; Tcl_QueueEvent((Tcl_Event *) evPtr, TCL_QUEUE_TAIL); } } } /* *---------------------------------------------------------------------- * * ConsoleBlockModeProc -- * * Set blocking or non-blocking mode on channel. * * Results: * 0 if successful, errno when failed. * * Side effects: * Sets the device into blocking or non-blocking mode. * *---------------------------------------------------------------------- */ static int ConsoleBlockModeProc( ClientData instanceData, /* Instance data for channel. */ int mode) /* TCL_MODE_BLOCKING or * TCL_MODE_NONBLOCKING. */ { ConsoleInfo *infoPtr = (ConsoleInfo *) instanceData; /* * Consoles on Windows can not be switched between blocking and nonblocking, * hence we have to emulate the behavior. This is done in the input * function by checking against a bit in the state. We set or unset the * bit here to cause the input function to emulate the correct behavior. */ if (mode == TCL_MODE_NONBLOCKING) { infoPtr->flags |= CONSOLE_ASYNC; } else { infoPtr->flags &= ~(CONSOLE_ASYNC); } return 0; } /* *---------------------------------------------------------------------- * * ConsoleCloseProc -- * * Closes a console based IO channel. * * Results: * 0 on success, errno otherwise. * * Side effects: * Closes the physical channel. * *---------------------------------------------------------------------- */ static int ConsoleCloseProc( ClientData instanceData, /* Pointer to ConsoleInfo structure. */ Tcl_Interp *interp) /* For error reporting. */ { ConsoleInfo *consolePtr = (ConsoleInfo *) instanceData; int errorCode; ConsoleInfo *infoPtr, **nextPtrPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); errorCode = 0; /* * Clean up the background thread if necessary. Note that this * must be done before we can close the file, since the * thread may be blocking trying to read from the console. */ if (consolePtr->readThread) { /* * Forcibly terminate the background thread. We cannot rely on the * thread to cleanly terminate itself because we have no way of * closing the handle without blocking in the case where the * thread is in the middle of an I/O operation. Note that we need * to guard against terminating the thread while it is in the * middle of Tcl_ThreadAlert because it won't be able to release * the notifier lock. */ Tcl_MutexLock(&consoleMutex); TerminateThread(consolePtr->readThread, 0); /* * Wait for the thread to terminate. This ensures that we are * completely cleaned up before we leave this function. */ WaitForSingleObject(consolePtr->readThread, INFINITE); Tcl_MutexUnlock(&consoleMutex); CloseHandle(consolePtr->readThread); CloseHandle(consolePtr->readable); CloseHandle(consolePtr->startReader); consolePtr->readThread = NULL; } consolePtr->validMask &= ~TCL_READABLE; /* * Wait for the writer thread to finish the current buffer, then * terminate the thread and close the handles. If the channel is * nonblocking, there should be no pending write operations. */ if (consolePtr->writeThread) { WaitForSingleObject(consolePtr->writable, INFINITE); /* * Forcibly terminate the background thread. We cannot rely on the * thread to cleanly terminate itself because we have no way of * closing the handle without blocking in the case where the * thread is in the middle of an I/O operation. Note that we need * to guard against terminating the thread while it is in the * middle of Tcl_ThreadAlert because it won't be able to release * the notifier lock. */ Tcl_MutexLock(&consoleMutex); TerminateThread(consolePtr->writeThread, 0); /* * Wait for the thread to terminate. This ensures that we are * completely cleaned up before we leave this function. */ WaitForSingleObject(consolePtr->writeThread, INFINITE); Tcl_MutexUnlock(&consoleMutex); CloseHandle(consolePtr->writeThread); CloseHandle(consolePtr->writable); CloseHandle(consolePtr->startWriter); consolePtr->writeThread = NULL; } consolePtr->validMask &= ~TCL_WRITABLE; /* * Don't close the Win32 handle if the handle is a standard channel * during the exit process. Otherwise, one thread may kill the stdio * of another. */ if (!TclInExit() || ((GetStdHandle(STD_INPUT_HANDLE) != consolePtr->handle) && (GetStdHandle(STD_OUTPUT_HANDLE) != consolePtr->handle) && (GetStdHandle(STD_ERROR_HANDLE) != consolePtr->handle))) { if (CloseHandle(consolePtr->handle) == FALSE) { TclWinConvertError(GetLastError()); errorCode = errno; } } consolePtr->watchMask &= consolePtr->validMask; /* * Remove the file from the list of watched files. */ for (nextPtrPtr = &(tsdPtr->firstConsolePtr), infoPtr = *nextPtrPtr; infoPtr != NULL; nextPtrPtr = &infoPtr->nextPtr, infoPtr = *nextPtrPtr) { if (infoPtr == (ConsoleInfo *)consolePtr) { *nextPtrPtr = infoPtr->nextPtr; break; } } if (consolePtr->writeBuf != NULL) { ckfree(consolePtr->writeBuf); consolePtr->writeBuf = 0; } ckfree((char*) consolePtr); return errorCode; } /* *---------------------------------------------------------------------- * * ConsoleInputProc -- * * Reads input from the IO channel into the buffer given. Returns * count of how many bytes were actually read, and an error indication. * * Results: * A count of how many bytes were read is returned and an error * indication is returned in an output argument. * * Side effects: * Reads input from the actual channel. * *---------------------------------------------------------------------- */ static int ConsoleInputProc( ClientData instanceData, /* Console state. */ char *buf, /* Where to store data read. */ int bufSize, /* How much space is available * in the buffer? */ int *errorCode) /* Where to store error code. */ { ConsoleInfo *infoPtr = (ConsoleInfo *) instanceData; DWORD count, bytesRead = 0; int result; *errorCode = 0; /* * Synchronize with the reader thread. */ result = WaitForRead(infoPtr, (infoPtr->flags & CONSOLE_ASYNC) ? 0 : 1); /* * If an error occurred, return immediately. */ if (result == -1) { *errorCode = errno; return -1; } if (infoPtr->readFlags & CONSOLE_BUFFERED) { /* * Data is stored in the buffer. */ if (bufSize < (infoPtr->bytesRead - infoPtr->offset)) { memcpy(buf, &infoPtr->buffer[infoPtr->offset], bufSize); bytesRead = bufSize; infoPtr->offset += bufSize; } else { memcpy(buf, &infoPtr->buffer[infoPtr->offset], bufSize); bytesRead = infoPtr->bytesRead - infoPtr->offset; /* * Reset the buffer */ infoPtr->readFlags &= ~CONSOLE_BUFFERED; infoPtr->offset = 0; } return bytesRead; } /* * Attempt to read bufSize bytes. The read will return immediately * if there is any data available. Otherwise it will block until * at least one byte is available or an EOF occurs. */ if (ReadConsole(infoPtr->handle, (LPVOID) buf, (DWORD) bufSize, &count, (LPOVERLAPPED) NULL) == TRUE) { buf[count] = '\0'; return count; } return -1; } /* *---------------------------------------------------------------------- * * ConsoleOutputProc -- * * Writes the given output on the IO channel. Returns count of how * many characters were actually written, and an error indication. * * Results: * A count of how many characters were written is returned and an * error indication is returned in an output argument. * * Side effects: * Writes output on the actual channel. * *---------------------------------------------------------------------- */ static int ConsoleOutputProc( ClientData instanceData, /* Console state. */ char *buf, /* The data buffer. */ int toWrite, /* How many bytes to write? */ int *errorCode) /* Where to store error code. */ { ConsoleInfo *infoPtr = (ConsoleInfo *) instanceData; DWORD bytesWritten, timeout; *errorCode = 0; timeout = (infoPtr->flags & CONSOLE_ASYNC) ? 0 : INFINITE; if (WaitForSingleObject(infoPtr->writable, timeout) == WAIT_TIMEOUT) { /* * The writer thread is blocked waiting for a write to complete * and the channel is in non-blocking mode. */ errno = EAGAIN; goto error; } /* * Check for a background error on the last write. */ if (infoPtr->writeError) { TclWinConvertError(infoPtr->writeError); infoPtr->writeError = 0; goto error; } if (infoPtr->flags & CONSOLE_ASYNC) { /* * The console is non-blocking, so copy the data into the output * buffer and restart the writer thread. */ if (toWrite > infoPtr->writeBufLen) { /* * Reallocate the buffer to be large enough to hold the data. */ if (infoPtr->writeBuf) { ckfree(infoPtr->writeBuf); } infoPtr->writeBufLen = toWrite; infoPtr->writeBuf = ckalloc(toWrite); } memcpy(infoPtr->writeBuf, buf, toWrite); infoPtr->toWrite = toWrite; ResetEvent(infoPtr->writable); SetEvent(infoPtr->startWriter); bytesWritten = toWrite; } else { /* * In the blocking case, just try to write the buffer directly. * This avoids an unnecessary copy. */ if (WriteFile(infoPtr->handle, (LPVOID) buf, (DWORD) toWrite, &bytesWritten, (LPOVERLAPPED) NULL) == FALSE) { TclWinConvertError(GetLastError()); goto error; } } return bytesWritten; error: *errorCode = errno; return -1; } /* *---------------------------------------------------------------------- * * ConsoleEventProc -- * * This function is invoked by Tcl_ServiceEvent when a file event * reaches the front of the event queue. This procedure invokes * Tcl_NotifyChannel on the console. * * Results: * Returns 1 if the event was handled, meaning it should be removed * from the queue. Returns 0 if the event was not handled, meaning * it should stay on the queue. The only time the event isn't * handled is if the TCL_FILE_EVENTS flag bit isn't set. * * Side effects: * Whatever the notifier callback does. * *---------------------------------------------------------------------- */ static int ConsoleEventProc( Tcl_Event *evPtr, /* Event to service. */ int flags) /* Flags that indicate what events to * handle, such as TCL_FILE_EVENTS. */ { ConsoleEvent *consoleEvPtr = (ConsoleEvent *)evPtr; ConsoleInfo *infoPtr; int mask; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!(flags & TCL_FILE_EVENTS)) { return 0; } /* * Search through the list of watched consoles for the one whose handle * matches the event. We do this rather than simply dereferencing * the handle in the event so that consoles can be deleted while the * event is in the queue. */ for (infoPtr = tsdPtr->firstConsolePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (consoleEvPtr->infoPtr == infoPtr) { infoPtr->flags &= ~(CONSOLE_PENDING); break; } } /* * Remove stale events. */ if (!infoPtr) { return 1; } /* * Check to see if the console is readable. Note * that we can't tell if a console is writable, so we always report it * as being writable unless we have detected EOF. */ mask = 0; if (infoPtr->watchMask & TCL_WRITABLE) { if (WaitForSingleObject(infoPtr->writable, 0) != WAIT_TIMEOUT) { mask = TCL_WRITABLE; } } if (infoPtr->watchMask & TCL_READABLE) { if (WaitForRead(infoPtr, 0) >= 0) { if (infoPtr->readFlags & CONSOLE_EOF) { mask = TCL_READABLE; } else { mask |= TCL_READABLE; } } } /* * Inform the channel of the events. */ Tcl_NotifyChannel(infoPtr->channel, infoPtr->watchMask & mask); return 1; } /* *---------------------------------------------------------------------- * * ConsoleWatchProc -- * * Called by the notifier to set up to watch for events on this * channel. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void ConsoleWatchProc( ClientData instanceData, /* Console state. */ int mask) /* What events to watch for, OR-ed * combination of TCL_READABLE, * TCL_WRITABLE and TCL_EXCEPTION. */ { ConsoleInfo **nextPtrPtr, *ptr; ConsoleInfo *infoPtr = (ConsoleInfo *) instanceData; int oldMask = infoPtr->watchMask; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); /* * Since most of the work is handled by the background threads, * we just need to update the watchMask and then force the notifier * to poll once. */ infoPtr->watchMask = mask & infoPtr->validMask; if (infoPtr->watchMask) { Tcl_Time blockTime = { 0, 0 }; if (!oldMask) { infoPtr->nextPtr = tsdPtr->firstConsolePtr; tsdPtr->firstConsolePtr = infoPtr; } Tcl_SetMaxBlockTime(&blockTime); } else { if (oldMask) { /* * Remove the console from the list of watched consoles. */ for (nextPtrPtr = &(tsdPtr->firstConsolePtr), ptr = *nextPtrPtr; ptr != NULL; nextPtrPtr = &ptr->nextPtr, ptr = *nextPtrPtr) { if (infoPtr == ptr) { *nextPtrPtr = ptr->nextPtr; break; } } } } } /* *---------------------------------------------------------------------- * * ConsoleGetHandleProc -- * * Called from Tcl_GetChannelHandle to retrieve OS handles from * inside a command consoleline based channel. * * Results: * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if * there is no handle for the specified direction. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int ConsoleGetHandleProc( ClientData instanceData, /* The console state. */ int direction, /* TCL_READABLE or TCL_WRITABLE */ ClientData *handlePtr) /* Where to store the handle. */ { ConsoleInfo *infoPtr = (ConsoleInfo *) instanceData; *handlePtr = (ClientData) infoPtr->handle; return TCL_OK; } /* *---------------------------------------------------------------------- * * WaitForRead -- * * Wait until some data is available, the console is at * EOF or the reader thread is blocked waiting for data (if the * channel is in non-blocking mode). * * Results: * Returns 1 if console is readable. Returns 0 if there is no data * on the console, but there is buffered data. Returns -1 if an * error occurred. If an error occurred, the threads may not * be synchronized. * * Side effects: * Updates the shared state flags. If no error occurred, * the reader thread is blocked waiting for a signal from the * main thread. * *---------------------------------------------------------------------- */ static int WaitForRead( ConsoleInfo *infoPtr, /* Console state. */ int blocking) /* Indicates whether call should be * blocking or not. */ { DWORD timeout, count; HANDLE *handle = infoPtr->handle; INPUT_RECORD input; while (1) { /* * Synchronize with the reader thread. */ timeout = blocking ? INFINITE : 0; if (WaitForSingleObject(infoPtr->readable, timeout) == WAIT_TIMEOUT) { /* * The reader thread is blocked waiting for data and the channel * is in non-blocking mode. */ errno = EAGAIN; return -1; } /* * At this point, the two threads are synchronized, so it is safe * to access shared state. */ /* * If the console has hit EOF, it is always readable. */ if (infoPtr->readFlags & CONSOLE_EOF) { return 1; } if (PeekConsoleInput(handle, &input, 1, &count) == FALSE) { /* * Check to see if the peek failed because of EOF. */ TclWinConvertError(GetLastError()); if (errno == EOF) { infoPtr->readFlags |= CONSOLE_EOF; return 1; } /* * Ignore errors if there is data in the buffer. */ if (infoPtr->readFlags & CONSOLE_BUFFERED) { return 0; } else { return -1; } } /* * If there is data in the buffer, the console must be * readable (since it is a line-oriented device). */ if (infoPtr->readFlags & CONSOLE_BUFFERED) { return 1; } /* * There wasn't any data available, so reset the thread and * try again. */ ResetEvent(infoPtr->readable); SetEvent(infoPtr->startReader); } } /* *---------------------------------------------------------------------- * * ConsoleReaderThread -- * * This function runs in a separate thread and waits for input * to become available on a console. * * Results: * None. * * Side effects: * Signals the main thread when input become available. May * cause the main thread to wake up by posting a message. May * one line from the console for each wait operation. * *---------------------------------------------------------------------- */ static DWORD WINAPI ConsoleReaderThread(LPVOID arg) { ConsoleInfo *infoPtr = (ConsoleInfo *)arg; HANDLE *handle = infoPtr->handle; DWORD count; for (;;) { /* * Wait for the main thread to signal before attempting to wait. */ WaitForSingleObject(infoPtr->startReader, INFINITE); count = 0; /* * Look for data on the console, but first ignore any events * that are not KEY_EVENTs */ if (ReadConsole(handle, infoPtr->buffer, CONSOLE_BUFFER_SIZE, &infoPtr->bytesRead, NULL) != FALSE) { /* * Data was stored in the buffer. */ infoPtr->readFlags |= CONSOLE_BUFFERED; } else { DWORD err; err = GetLastError(); if (err == EOF) { infoPtr->readFlags = CONSOLE_EOF; } } /* * Signal the main thread by signalling the readable event and * then waking up the notifier thread. */ SetEvent(infoPtr->readable); /* * Alert the foreground thread. Note that we need to treat this like * a critical section so the foreground thread does not terminate * this thread while we are holding a mutex in the notifier code. */ Tcl_MutexLock(&consoleMutex); Tcl_ThreadAlert(infoPtr->threadId); Tcl_MutexUnlock(&consoleMutex); } return 0; /* NOT REACHED */ } /* *---------------------------------------------------------------------- * * ConsoleWriterThread -- * * This function runs in a separate thread and writes data * onto a console. * * Results: * Always returns 0. * * Side effects: * Signals the main thread when an output operation is completed. * May cause the main thread to wake up by posting a message. * *---------------------------------------------------------------------- */ static DWORD WINAPI ConsoleWriterThread(LPVOID arg) { ConsoleInfo *infoPtr = (ConsoleInfo *)arg; HANDLE *handle = infoPtr->handle; DWORD count, toWrite; char *buf; for (;;) { /* * Wait for the main thread to signal before attempting to write. */ WaitForSingleObject(infoPtr->startWriter, INFINITE); buf = infoPtr->writeBuf; toWrite = infoPtr->toWrite; /* * Loop until all of the bytes are written or an error occurs. */ while (toWrite > 0) { if (WriteFile(handle, buf, toWrite, &count, NULL) == FALSE) { infoPtr->writeError = GetLastError(); break; } else { toWrite -= count; buf += count; } } /* * Signal the main thread by signalling the writable event and * then waking up the notifier thread. */ SetEvent(infoPtr->writable); /* * Alert the foreground thread. Note that we need to treat this like * a critical section so the foreground thread does not terminate * this thread while we are holding a mutex in the notifier code. */ Tcl_MutexLock(&consoleMutex); Tcl_ThreadAlert(infoPtr->threadId); Tcl_MutexUnlock(&consoleMutex); } return 0; /* NOT REACHED */ } /* *---------------------------------------------------------------------- * * TclWinOpenConsoleChannel -- * * Constructs a Console channel for the specified standard OS handle. * This is a helper function to break up the construction of * channels into File, Console, or Serial. * * Results: * Returns the new channel, or NULL. * * Side effects: * May open the channel * *---------------------------------------------------------------------- */ Tcl_Channel TclWinOpenConsoleChannel(handle, channelName, permissions) HANDLE handle; char *channelName; int permissions; { char encoding[4 + TCL_INTEGER_SPACE]; ConsoleInfo *infoPtr; ThreadSpecificData *tsdPtr; DWORD id; tsdPtr = ConsoleInit(); /* * See if a channel with this handle already exists. */ infoPtr = (ConsoleInfo *) ckalloc((unsigned) sizeof(ConsoleInfo)); memset(infoPtr, 0, sizeof(ConsoleInfo)); infoPtr->validMask = permissions; infoPtr->handle = handle; wsprintfA(encoding, "cp%d", GetConsoleCP()); /* * Use the pointer for the name of the result channel. * This keeps the channel names unique, since some may share * handles (stdin/stdout/stderr for instance). */ wsprintfA(channelName, "file%lx", (int) infoPtr); infoPtr->channel = Tcl_CreateChannel(&consoleChannelType, channelName, (ClientData) infoPtr, permissions); infoPtr->threadId = Tcl_GetCurrentThread(); if (permissions & TCL_READABLE) { infoPtr->readable = CreateEvent(NULL, TRUE, TRUE, NULL); infoPtr->startReader = CreateEvent(NULL, FALSE, FALSE, NULL); infoPtr->readThread = CreateThread(NULL, 8000, ConsoleReaderThread, infoPtr, 0, &id); SetThreadPriority(infoPtr->readThread, THREAD_PRIORITY_HIGHEST); } if (permissions & TCL_WRITABLE) { infoPtr->writable = CreateEvent(NULL, TRUE, TRUE, NULL); infoPtr->startWriter = CreateEvent(NULL, FALSE, FALSE, NULL); infoPtr->writeThread = CreateThread(NULL, 8000, ConsoleWriterThread, infoPtr, 0, &id); } /* * Files have default translation of AUTO and ^Z eof char, which * means that a ^Z will be accepted as EOF when reading. */ Tcl_SetChannelOption(NULL, infoPtr->channel, "-translation", "auto"); Tcl_SetChannelOption(NULL, infoPtr->channel, "-eofchar", "\032 {}"); Tcl_SetChannelOption(NULL, infoPtr->channel, "-encoding", encoding); return infoPtr->channel; } /* $History: tclwinconsole.c $ * * ***************** Version 1 ***************** * User: Dtashley Date: 1/02/01 Time: 12:51a * Created in $/IjuScripter, IjuConsole/Source/Tcl Base * Initial check-in. */ /* End of TCLWINCONSOLE.C */